IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v9y2017i2p292-d90641.html
   My bibliography  Save this article

Energy Saving and Carbon Reduction in the Operation Stage of Cross Laminated Timber Residential Buildings in China

Author

Listed:
  • Haibo Guo

    (School of Architecture, Harbin Institute of Technology, Harbin 150001, China)

  • Ying Liu

    (Department of Architecture and Civil Engineering, University of Bath, Bath BA2 7AY, UK)

  • Wen-Shao Chang

    (Department of Architecture and Civil Engineering, University of Bath, Bath BA2 7AY, UK)

  • Yu Shao

    (School of Architecture, Harbin Institute of Technology, Harbin 150001, China)

  • Cheng Sun

    (School of Architecture, Harbin Institute of Technology, Harbin 150001, China)

Abstract

This paper focused on energy consumption and carbon emission for heating and cooling during a building’s operation stage, and examined the energy effects of using Cross Laminated Timber (CLT) as an alternative building material to reinforced concrete (RC) in China’s 31 key cities located in different climate zones. The authors designed two seven-story residential buildings, which were constructed with RC framed and CLT systems, separately. This was followed by simulating the energy consumption using commercialized software IES TM under the different climate zones and calculating the carbon emissions. Comparisons were made between RC and CLT systems buildings on the basis of simulation data. The results show that the estimated energy consumption and carbon emission in CLT buildings are much lower than that of RC buildings in all studied cities, which indicates that CLT systems have good potential in reducing carbon emission and saving energy consumption compared to RC. The energy consumptions and carbon emissions in both concrete and CLT buildings are closely related to the climate zones. Buildings in Severe Cold and Cold Regions consumed the most energy and released more carbon. At the national level, the estimated energy consumption at the operation stage, in the studied building with RC frames and CLT system was approximately 465.1 MJ/m 2 and 332.6 MJ/m 2 per annum, respectively. Despite vast differences in China’s climate zones, the effects of energy saving and carbon reduction potentials of CLT buildings show little relationship to the climate zone. CLT buildings may result in a weighted 29.4% energy saving, which equals 24.6% carbon reductions, compared with RC buildings at the operation stage at national level, although it may vary in different climate zones.

Suggested Citation

  • Haibo Guo & Ying Liu & Wen-Shao Chang & Yu Shao & Cheng Sun, 2017. "Energy Saving and Carbon Reduction in the Operation Stage of Cross Laminated Timber Residential Buildings in China," Sustainability, MDPI, vol. 9(2), pages 1-17, February.
  • Handle: RePEc:gam:jsusta:v:9:y:2017:i:2:p:292-:d:90641
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/9/2/292/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/9/2/292/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Cabeza, Luisa F. & Rincón, Lídia & Vilariño, Virginia & Pérez, Gabriel & Castell, Albert, 2014. "Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 394-416.
    2. Ying Liu & Haibo Guo & Cheng Sun & Wen-Shao Chang, 2016. "Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach," Sustainability, MDPI, vol. 8(10), pages 1-13, October.
    3. Ürge-Vorsatz, Diana & Cabeza, Luisa F. & Serrano, Susana & Barreneche, Camila & Petrichenko, Ksenia, 2015. "Heating and cooling energy trends and drivers in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 85-98.
    4. Chang, Kai & Chang, Hao, 2016. "Cutting CO2 intensity targets of interprovincial emissions trading in China," Applied Energy, Elsevier, vol. 163(C), pages 211-221.
    5. Dhakal, Shobhakar, 2009. "Urban energy use and carbon emissions from cities in China and policy implications," Energy Policy, Elsevier, vol. 37(11), pages 4208-4219, November.
    6. Xianzheng Gong & Zuoren Nie & Zhihong Wang & Suping Cui & Feng Gao & Tieyong Zuo, 2012. "Life Cycle Energy Consumption and Carbon Dioxide Emission of Residential Building Designs in Beijing," Journal of Industrial Ecology, Yale University, vol. 16(4), pages 576-587, August.
    7. Borjesson, Pal & Gustavsson, Leif, 2000. "Greenhouse gas balances in building construction: wood versus concrete from life-cycle and forest land-use perspectives," Energy Policy, Elsevier, vol. 28(9), pages 575-588, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Darija Gajić & Slobodan Peulić & Tim Mavrič & Anna Sandak & Črtomir Tavzes & Milica Malešević & Mladen Slijepčević, 2021. "Energy Retrofitting Opportunities Using Renewable Materials—Comparative Analysis of the Current Frameworks in Bosnia-Herzegovina and Slovenia," Sustainability, MDPI, vol. 13(2), pages 1-19, January.
    2. Lechón, Yolanda & Lago, Carmen & Herrera, Israel & Gamarra, Ana Rosa & Pérula, Alberto, 2023. "Carbon benefits of different energy storage alternative end uses. Application to the Spanish case," Renewable and Sustainable Energy Reviews, Elsevier, vol. 171(C).
    3. Haibo Guo & Ying Liu & Yiping Meng & Haoyu Huang & Cheng Sun & Yu Shao, 2017. "A Comparison of the Energy Saving and Carbon Reduction Performance between Reinforced Concrete and Cross-Laminated Timber Structures in Residential Buildings in the Severe Cold Region of China," Sustainability, MDPI, vol. 9(8), pages 1-15, August.
    4. Qingye Han & Junjie Chang & Guiwen Liu & Heng Zhang, 2022. "The Carbon Emission Assessment of a Building with Different Prefabrication Rates in the Construction Stage," IJERPH, MDPI, vol. 19(4), pages 1-17, February.
    5. Xunzhi Yin & Jiaqi Yu & Qi Dong & Yongheng Jia & Cheng Sun, 2020. "Energy Sustainability of Rural Residential Buildings with Bio-Based Building Fabric in Northeast China," Energies, MDPI, vol. 13(21), pages 1-14, November.
    6. Qi Dong & Kai Xing & Hongrui Zhang, 2017. "Artificial Neural Network for Assessment of Energy Consumption and Cost for Cross Laminated Timber Office Building in Severe Cold Regions," Sustainability, MDPI, vol. 10(1), pages 1-15, December.
    7. Ling Dong & Yu Wang & Hong Xian Li & Boya Jiang & Mohamed Al-Hussein, 2018. "Carbon Reduction Measures-Based LCA of Prefabricated Temporary Housing with Renewable Energy Systems," Sustainability, MDPI, vol. 10(3), pages 1-22, March.
    8. Rafael Tordecilla-Madera & Andrés Polo & Adrián Cañón, 2018. "Vehicles Allocation for Fruit Distribution Considering CO 2 Emissions and Decisions on Subcontracting," Sustainability, MDPI, vol. 10(7), pages 1-21, July.
    9. Fuyi Yao & Guiwen Liu & Yingbo Ji & Wenjing Tong & Xiaoyun Du & Kaijian Li & Asheem Shrestha & Igor Martek, 2020. "Evaluating the Environmental Impact of Construction within the Industrialized Building Process: A Monetization and Building Information Modelling Approach," IJERPH, MDPI, vol. 17(22), pages 1-22, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Haibo Guo & Ying Liu & Yiping Meng & Haoyu Huang & Cheng Sun & Yu Shao, 2017. "A Comparison of the Energy Saving and Carbon Reduction Performance between Reinforced Concrete and Cross-Laminated Timber Structures in Residential Buildings in the Severe Cold Region of China," Sustainability, MDPI, vol. 9(8), pages 1-15, August.
    2. Mi, Zhifu & Zhang, Yunkun & Guan, Dabo & Shan, Yuli & Liu, Zhu & Cong, Ronggang & Yuan, Xiao-Chen & Wei, Yi-Ming, 2016. "Consumption-based emission accounting for Chinese cities," Applied Energy, Elsevier, vol. 184(C), pages 1073-1081.
    3. Roth, Jonathan & Martin, Amory & Miller, Clayton & Jain, Rishee K., 2020. "SynCity: Using open data to create a synthetic city of hourly building energy estimates by integrating data-driven and physics-based methods," Applied Energy, Elsevier, vol. 280(C).
    4. Kai Yin & Dengsheng Lu & Yichen Tian & Qianjun Zhao & Chao Yuan, 2014. "Evaluation of Carbon and Oxygen Balances in Urban Ecosystems Using Land Use/Land Cover and Statistical Data," Sustainability, MDPI, vol. 7(1), pages 1-27, December.
    5. Diana Carolina Gámez-García & José Manuel Gómez-Soberón & Ramón Corral-Higuera & Héctor Saldaña-Márquez & María Consolación Gómez-Soberón & Susana Paola Arredondo-Rea, 2018. "A Cradle to Handover Life Cycle Assessment of External Walls: Choice of Materials and Prognosis of Elements," Sustainability, MDPI, vol. 10(8), pages 1-24, August.
    6. Zhang, Wei & Li, Ke & Zhou, Dequn & Zhang, Wenrui & Gao, Hui, 2016. "Decomposition of intensity of energy-related CO2 emission in Chinese provinces using the LMDI method," Energy Policy, Elsevier, vol. 92(C), pages 369-381.
    7. Yuki Fuchigami & Keisuke Kojiro & Yuzo Furuta, 2020. "Quantification of Greenhouse Gas Emissions from Wood-Plastic Recycled Composite (WPRC) and Verification of the Effect of Reducing Emissions through Multiple Recycling," Sustainability, MDPI, vol. 12(6), pages 1-13, March.
    8. Kimberly Bawden & Eric Williams, 2015. "Hybrid Life Cycle Assessment of Low, Mid and High-Rise Multi-Family Dwellings," Challenges, MDPI, vol. 6(1), pages 1-19, April.
    9. Dixit, Manish K., 2017. "Life cycle embodied energy analysis of residential buildings: A review of literature to investigate embodied energy parameters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 390-413.
    10. Ying Liu & Haibo Guo & Cheng Sun & Wen-Shao Chang, 2016. "Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach," Sustainability, MDPI, vol. 8(10), pages 1-13, October.
    11. Minunno, Roberto & O'Grady, Timothy & Morrison, Gregory M. & Gruner, Richard L., 2021. "Investigating the embodied energy and carbon of buildings: A systematic literature review and meta-analysis of life cycle assessments," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    12. Yu Dong & Tongyu Qin & Siyuan Zhou & Lu Huang & Rui Bo & Haibo Guo & Xunzhi Yin, 2020. "Comparative Whole Building Life Cycle Assessment of Energy Saving and Carbon Reduction Performance of Reinforced Concrete and Timber Stadiums—A Case Study in China," Sustainability, MDPI, vol. 12(4), pages 1-24, February.
    13. Burek, Jasmina & Nutter, Darin W., 2019. "A life cycle assessment-based multi-objective optimization of the purchased, solar, and wind energy for the grocery, perishables, and general merchandise multi-facility distribution center network," Applied Energy, Elsevier, vol. 235(C), pages 1427-1446.
    14. Florian Knobloch & Hector Pollitt & Unnada Chewpreecha & Vassilis Daioglou & Jean-Francois Mercure, 2017. "Simulating the deep decarbonisation of residential heating for limiting global warming to 1.5C," Papers 1710.11019, arXiv.org, revised May 2018.
    15. Bell, N.O. & Bilbao, J.I. & Kay, M. & Sproul, A.B., 2022. "Future climate scenarios and their impact on heating, ventilation and air-conditioning system design and performance for commercial buildings for 2050," Renewable and Sustainable Energy Reviews, Elsevier, vol. 162(C).
    16. Jaykumar Joshi & Akhilesh Magal & Vijay S. Limaye & Prima Madan & Anjali Jaiswal & Dileep Mavalankar & Kim Knowlton, 2022. "Climate change and 2030 cooling demand in Ahmedabad, India: opportunities for expansion of renewable energy and cool roofs," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 27(7), pages 1-17, October.
    17. Ahmed, Khalid, 2015. "The sheer scale of China’s urban renewal and CO2 emissions: Multiple structural breaks, long-run relationship and short-run dynamics," MPRA Paper 71035, University Library of Munich, Germany.
    18. Du, Xiaoyun & Meng, Conghui & Guo, Zhenhua & Yan, Hang, 2023. "An improved approach for measuring the efficiency of low carbon city practice in China," Energy, Elsevier, vol. 268(C).
    19. Yong Bian & Zhi Yu & Xuelan Zeng & Jingchun Feng & Chao He, 2018. "Achieving China’s Long-Term Carbon Emission Abatement Targets: A Perspective from Regional Disparity," Sustainability, MDPI, vol. 10(11), pages 1-19, November.
    20. Sierra-Pérez, Jorge & Rodríguez-Soria, Beatriz & Boschmonart-Rives, Jesús & Gabarrell, Xavier, 2018. "Integrated life cycle assessment and thermodynamic simulation of a public building’s envelope renovation: Conventional vs. Passivhaus proposal," Applied Energy, Elsevier, vol. 212(C), pages 1510-1521.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:9:y:2017:i:2:p:292-:d:90641. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.