IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i3p2642-d1054404.html
   My bibliography  Save this article

Studying Thermal and Mechanical Properties of Recycled Concrete by Using Ceramic Aggregate

Author

Listed:
  • Yumei Wang

    (College of Architecture and Civil Engineering, Nanning University, Nanning 541699, China
    Department of Structural Engineering, College of Civil Engineering, Tongji University, Shanghai 200092, China)

  • Jinyan Wang

    (College of Urban and Rural Construction, Guangxi Vocational University of Agriculture, Nanning 530007, China
    Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Guangxi University, Nanning 530004, China)

  • Zhiheng Deng

    (Guangxi Key Laboratory of Disaster Prevention and Engineering Safety, Guangxi University, Nanning 530004, China)

  • Jianzhuang Xiao

    (Department of Structural Engineering, College of Civil Engineering, Tongji University, Shanghai 200092, China)

Abstract

Ceramic aggregate has the characteristics of light weight, heat insulation, and low cost, and recycled aggregate is a type of green material that realizes the re-crushing of construction waste. This paper studied the impact of replacing natural coarse aggregate with ceramic aggregate and natural sand with recycled fine aggregate, on the physical, mechanical, and thermal properties of concrete. Recycled fine aggregate was used to completely replace natural sand. A total of five concrete mixes (including a reference mix) were prepared with different levels of ceramic aggregate (0%, 30%, 50%, 70%, 100%). Density, compressive strength, thermal conductivity, and thermal inertia index were measured to evaluate the performance of each mixture, and ceramic concrete board and hollow blocks were designed for testing the thermal properties. Results of testing show that density, strength, and thermal performance are interrelated. The smaller the density, the lower the strength, and it indicates that ceramic aggregate has a negative influence on strength in concrete. Meanwhile, the smaller the density, the higher the thermal resistance, and the addition of ceramic aggregate can improve the thermal insulation of concrete. The mechanical and thermal properties are both affected by the ceramic replacement ratio. Ceramic aggregate improves the thermal properties of recycled concrete, and the negative influence of ceramic aggregate on compressive strength can be controlled by the replacement ratio of aggregate in concrete. Based on the overall comparison and analysis, a mix with 50% ceramic aggregate shows relatively better strength and thermal insulation compared to other mixes. The use of ceramic aggregate in combination with recycled fine aggregate can effectively reduce the environmental pollution and make an economical substitute for their natural counterparts.

Suggested Citation

  • Yumei Wang & Jinyan Wang & Zhiheng Deng & Jianzhuang Xiao, 2023. "Studying Thermal and Mechanical Properties of Recycled Concrete by Using Ceramic Aggregate," Sustainability, MDPI, vol. 15(3), pages 1-14, February.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:3:p:2642-:d:1054404
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/3/2642/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/3/2642/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. D'Alessandro, Antonella & Pisello, Anna Laura & Fabiani, Claudia & Ubertini, Filippo & Cabeza, Luisa F. & Cotana, Franco, 2018. "Multifunctional smart concretes with novel phase change materials: Mechanical and thermo-energy investigation," Applied Energy, Elsevier, vol. 212(C), pages 1448-1461.
    2. Cheeseman, C.R. & Virdi, G.S., 2005. "Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash," Resources, Conservation & Recycling, Elsevier, vol. 45(1), pages 18-30.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Mei & Liu, Peng & Liu, Lang & Geng, Mingli & Wang, Yu & Zhang, Zhefeng, 2022. "The impact of the backfill direction on the backfill cooling performance using phase change materials in mine cooling," Renewable Energy, Elsevier, vol. 201(P1), pages 1026-1037.
    2. Cárdenas-Ramírez, Carolina & Gómez, Maryory A. & Jaramillo, Franklin & Cardona, Andrés F. & Fernández, Angel G. & Cabeza, Luisa F., 2022. "Experimental steady-state and transient thermal performance of materials for thermal energy storage in building applications: From powder SS-PCMs to SS-PCM-based acrylic plaster," Energy, Elsevier, vol. 250(C).
    3. Erick Grünhäuser Soares & João Castro-Gomes & Mateusz Sitarz & Tomasz Zdeb & Izabela Hager, 2021. "The Immobilisation of Heavy Metals from Sewage Sludge Ash in CO 2 -Cured Mortars," Sustainability, MDPI, vol. 13(22), pages 1-13, November.
    4. Claudia Fabiani & Anna Laura Pisello & Marco Barbanera & Luisa F. Cabeza & Franco Cotana, 2019. "Assessing the Potentiality of Animal Fat Based-Bio Phase Change Materials (PCM) for Building Applications: An Innovative Multipurpose Thermal Investigation," Energies, MDPI, vol. 12(6), pages 1-18, March.
    5. González-Corrochano, B. & Alonso-Azcárate, J. & Rodas, M., 2009. "Characterization of lightweight aggregates manufactured from washing aggregate sludge and fly ash," Resources, Conservation & Recycling, Elsevier, vol. 53(10), pages 571-581.
    6. Sih Ying Kong & Xu Yang & Suvash Chandra Paul & Leong Sing Wong & Branko Šavija, 2019. "Thermal Response of Mortar Panels with Different Forms of Macro-Encapsulated Phase Change Materials: A Finite Element Study," Energies, MDPI, vol. 12(13), pages 1-15, July.
    7. Yee Cheng Lim & Chih-Feng Chen & Chiu-Wen Chen & Cheng-Di Dong, 2023. "Valorization of Dredged Harbor Sediments through Lightweight Aggregate Production: Application of Waste Oyster Shells," Sustainability, MDPI, vol. 15(6), pages 1-13, March.
    8. Alberto Belli & Alessandra Mobili & Tiziano Bellezze & Francesca Tittarelli & Paulo Cachim, 2018. "Evaluating the Self-Sensing Ability of Cement Mortars Manufactured with Graphene Nanoplatelets, Virgin or Recycled Carbon Fibers through Piezoresistivity Tests," Sustainability, MDPI, vol. 10(11), pages 1-12, November.
    9. Al-Yasiri, Qudama & Szabó, Márta, 2022. "Energetic and thermal comfort assessment of phase change material passively incorporated building envelope in severe hot Climate: An experimental study," Applied Energy, Elsevier, vol. 314(C).
    10. Esequiel Mesquita & Ana Mafalda Matos & Israel Sousa & Mylene Vieira & Luís P. M. Santos, 2023. "Studying the Incorporation of Multi-Walled Carbon Nanotubes in High-Performance Concrete," Sustainability, MDPI, vol. 15(17), pages 1-15, August.
    11. Maleki, Mahdi & Imani, Abolhassan & Ahmadi, Rouhollah & Banna Motejadded Emrooz, Hosein & Beitollahi, Ali, 2020. "Low-cost carbon foam as a practical support for organic phase change materials in thermal management," Applied Energy, Elsevier, vol. 258(C).
    12. Sandra Cunha & Antonella Sarcinella & José Aguiar & Mariaenrica Frigione, 2023. "Perspective on the Development of Energy Storage Technology Using Phase Change Materials in the Construction Industry: A Review," Energies, MDPI, vol. 16(12), pages 1-32, June.
    13. Lin, Yaxue & Zhu, Chuqiao & Alva, Guruprasad & Fang, Guiyin, 2018. "Microencapsulation and thermal properties of myristic acid with ethyl cellulose shell for thermal energy storage," Applied Energy, Elsevier, vol. 231(C), pages 494-501.
    14. Reza Khakian & Mehrdad Karimimoshaver & Farshid Aram & Soghra Zoroufchi Benis & Amir Mosavi & Annamaria R. Varkonyi-Koczy, 2020. "Modeling Nearly Zero Energy Buildings for Sustainable Development in Rural Areas," Energies, MDPI, vol. 13(10), pages 1-19, May.
    15. Kourti, Ioanna & Cheeseman, Christopher R., 2010. "Properties and microstructure of lightweight aggregate produced from lignite coal fly ash and recycled glass," Resources, Conservation & Recycling, Elsevier, vol. 54(11), pages 769-775.
    16. Han, Weifang & Ge, Chunhua & Zhang, Rui & Ma, Zhiyan & Wang, Lixia & Zhang, Xiangdong, 2019. "Boron nitride foam as a polymer alternative in packaging phase change materials: Synthesis, thermal properties and shape stability," Applied Energy, Elsevier, vol. 238(C), pages 942-951.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:3:p:2642-:d:1054404. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.