IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i2p921-d1024855.html
   My bibliography  Save this article

Simulation Study on Spatial Form of the Suspended Roof Structure of Working Face in Shallow Coal Seam

Author

Listed:
  • Yanpeng He

    (College of Safety Science and Engineering, Xi’an University of Science and Technology, Xi’an 710054, China
    College of Energy Engineering, Xi’an University of Science and Technology, Xi’an 710054, China)

  • Qingxiang Huang

    (College of Energy Engineering, Xi’an University of Science and Technology, Xi’an 710054, China)

Abstract

Longwall fully comprehensive mechanized mining is mainly used for the working faces of shallow coal seam with large mining height, which usually have a large suspended roof at the face end. The overhang at the face end leads to stress concentration, which affects the safe mining of the working face. In this paper, we use the 15210 working face with a suspended roof (overhanging area 50~70 m 2 ) of the Zhangjiamao coal mine as study background, with physical simulation, numerical calculation and theoretical analysis, the spatial morphologies and changes in the roof structure at the face ends of the working face in shallow coal seam are obtained, in which the suspended roof increase from the bottom to top, forming step-laminated structures. The caving interval of the suspended roof at the face end is about two times the period weighting interval, and the suspended roof area at the tailgate is smaller than at the headgate. The distribution of the shear and the principal stress field at the face-end region is arc-shaped, and the distribution of the plastic zone shows that the collapse of a suspended ceiling has obvious hysteresis. According to the simplified analysis of the Marcus plate, when the layers of the stepped curved triangular plates increase, the length of the suspended roof on the solid coal side also increases, which is consistent with the results of the physical simulation and numerical calculations. The formation mechanism of the roof at the end of the working face provides a research foundation for the control of roofs found at face ends and further improves the theory of roof structure and the safety mining of suspended roof areas.

Suggested Citation

  • Yanpeng He & Qingxiang Huang, 2023. "Simulation Study on Spatial Form of the Suspended Roof Structure of Working Face in Shallow Coal Seam," Sustainability, MDPI, vol. 15(2), pages 1-20, January.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:2:p:921-:d:1024855
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/2/921/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/2/921/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Qingxiang Huang & Yanpeng He & Feng Li, 2020. "Research on the Roof Advanced Breaking Position and Influences of Large Mining Height Working Face in Shallow Coal Seam," Energies, MDPI, vol. 13(7), pages 1-15, April.
    2. Wei-bin Guo & Hong-sheng Wang & Guo-wei Dong & Lei Li & Yao-guang Huang, 2017. "A Case Study of Effective Support Working Resistance and Roof Support Technology in Thick Seam Fully-Mechanized Face Mining with Hard Roof Conditions," Sustainability, MDPI, vol. 9(6), pages 1-17, June.
    3. Dawid Szurgacz & Jarosław Brodny, 2019. "Analysis of the Influence of Dynamic Load on the Work Parameters of a Powered Roof Support’s Hydraulic Leg," Sustainability, MDPI, vol. 11(9), pages 1-13, May.
    4. Qingxiang Huang & Yanpeng He, 2019. "Research on Overburden Movement Characteristics of Large Mining Height Working Face in Shallow Buried Thin Bedrock," Energies, MDPI, vol. 12(21), pages 1-22, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Houqiang Yang & Changliang Han & Nong Zhang & Changlun Sun & Dongjiang Pan & Minghui Dong, 2019. "Stability Control of a Goaf-Side Roadway under the Mining Disturbance of an Adjacent Coal Working Face in an Underground Mine," Sustainability, MDPI, vol. 11(22), pages 1-18, November.
    2. Dawid Szurgacz & Jarosław Brodny, 2020. "Adapting the Powered Roof Support to Diverse Mining and Geological Conditions," Energies, MDPI, vol. 13(2), pages 1-22, January.
    3. Lirong Wan & Xuehui Yu & Dejian Ma & Zhaosheng Meng & Qingliang Zeng & Guoqing Qi, 2022. "Dynamic Response Analysis of a Novel Anti-Impact Pressure Balance Jack," Energies, MDPI, vol. 15(14), pages 1-15, July.
    4. Jun Guo & Guorui Feng & Pengfei Wang & Tingye Qi & Xiaorong Zhang & Yonggan Yan, 2018. "Roof Strata Behavior and Support Resistance Determination for Ultra-Thick Longwall Top Coal Caving Panel: A Case Study of the Tashan Coal Mine," Energies, MDPI, vol. 11(5), pages 1-19, April.
    5. Qingxiang Huang & Yanpeng He, 2019. "Research on Overburden Movement Characteristics of Large Mining Height Working Face in Shallow Buried Thin Bedrock," Energies, MDPI, vol. 12(21), pages 1-22, November.
    6. Xiaoping Shao & Xin Li & Long Wang & Zhiyu Fang & Bingchao Zhao & Ershuai Liu & Yeqing Tao & Lang Liu, 2020. "Study on the Pressure-Bearing Law of Backfilling Material Based on Three-Stage Strip Backfilling Mining," Energies, MDPI, vol. 13(1), pages 1-16, January.
    7. Yaqiang Gong & Guangli Guo & Guojian Zhang & Kaikai Guo & Qiu Du & Liping Wang, 2021. "A Vertical Joint Spacing Calculation Method for UDEC Modeling of Large-Scale Strata and Its Influence on Mining-Induced Surface Subsidence," Sustainability, MDPI, vol. 13(23), pages 1-14, December.
    8. Malte Scharf & Ludger Heide & Alexander Grahle & Anne Magdalene Syré & Dietmar Göhlich, 2020. "Environmental Impact of Subsidy Concepts for Stimulating Car Sales in Germany," Sustainability, MDPI, vol. 12(23), pages 1-27, December.
    9. Feng Cui & Yanbin Yang & Xingping Lai & Chong Jia & Pengfei Shan, 2019. "Experimental Study on the Effect of Advancing Speed and Stoping Time on the Energy Release of Overburden in an Upward Mining Coal Working Face with a Hard Roof," Sustainability, MDPI, vol. 12(1), pages 1-23, December.
    10. Jia Liu & Fengshan Ma & Jie Guo & Guang Li & Yewei Song & Yang Wan, 2022. "A Field Study on the Law of Spatiotemporal Development of Rock Movement of Under-Sea Mining, Shandong, China," Sustainability, MDPI, vol. 14(10), pages 1-13, May.
    11. Qiang Fu & Ke Yang & Xiang He & Zhen Wei & Qinggan Yang, 2022. "Characteristics of Strata Behavior and Differentiated Control of Fully Mechanized Mining Working Face with Abnormal Roof," Sustainability, MDPI, vol. 14(20), pages 1-15, October.
    12. Ningbo Zhang & Changyou Liu & Baobao Chen, 2018. "A Case Study of Presplitting Blasting Parameters of Hard and Massive Roof Based on the Interaction between Support and Overlying Strata," Energies, MDPI, vol. 11(6), pages 1-14, May.
    13. Yuantian Sun & Guichen Li & Junfei Zhang & Deyu Qian, 2019. "Stability Control for the Rheological Roadway by a Novel High-Efficiency Jet Grouting Technique in Deep Underground Coal Mines," Sustainability, MDPI, vol. 11(22), pages 1-17, November.
    14. Qingliang Zeng & Zhaoji Li & Lirong Wan & Dejian Ma & Jiantao Wang, 2022. "Research on Dynamic Characteristics of Canopy and Column of Hydraulic Support under Impact Load," Energies, MDPI, vol. 15(13), pages 1-20, June.
    15. Qingxiang Huang & Yanpeng He & Feng Li, 2020. "Research on the Roof Advanced Breaking Position and Influences of Large Mining Height Working Face in Shallow Coal Seam," Energies, MDPI, vol. 13(7), pages 1-15, April.
    16. Guojun Zhang & Quansheng Li & Zhuhe Xu & Yong Zhang, 2022. "Roof Fractures of Near-Vertical and Extremely Thick Coal Seams in Horizontally Grouped Top-Coal Drawing Method Based on the Theory of a Thin Plate," Sustainability, MDPI, vol. 14(16), pages 1-22, August.
    17. Magdalena Tutak, 2019. "The Influence of the Permeability of the Fractures Zone Around the Heading on the Concentration and Distribution of Methane," Sustainability, MDPI, vol. 12(1), pages 1-24, December.
    18. Dawid Szurgacz, 2021. "Dynamic Analysis for the Hydraulic Leg Power of a Powered Roof Support," Energies, MDPI, vol. 14(18), pages 1-12, September.
    19. Faham Tahmasebinia & Chengguo Zhang & Ismet Canbulat & Samad Sepasgozar & Serkan Saydam, 2020. "A Novel Damage Model for Strata Layers and Coal Mass," Energies, MDPI, vol. 13(8), pages 1-17, April.
    20. Rasa Smaliukiene & Svajone Bekesiene, 2020. "Towards Sustainable Human Resources: How Generational Differences Impact Subjective Wellbeing in the Military?," Sustainability, MDPI, vol. 12(23), pages 1-21, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:2:p:921-:d:1024855. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.