IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2022i1p713-d1021083.html

Finite Element Analysis of Different Infill Patterns for 3D Printed Tidal Turbine Blade

Author

Listed:
  • Glecelyn M. Galvez

    (Department of Mechanical Engineering, University of the Philippines Diliman, Quezon City 1101, Philippines)

  • Karl Andrie M. Olivar

    (Department of Mechanical Engineering, University of the Philippines Diliman, Quezon City 1101, Philippines)

  • Francis Rey G. Tolentino

    (Department of Mechanical Engineering, University of the Philippines Diliman, Quezon City 1101, Philippines)

  • Louis Angelo M. Danao

    (Department of Mechanical Engineering, University of the Philippines Diliman, Quezon City 1101, Philippines)

  • Binoe E. Abuan

    (Department of Mechanical Engineering, University of the Philippines Diliman, Quezon City 1101, Philippines)

Abstract

The fabrication route for tidal turbine blades has been compounded with the appearance of additive manufacturing; with the use of infill patterns, improvement of mechanical strength and material reduction for 3D printed parts can be obtained. Through finite element analysis and three-point bend tests, the optimal infill lattice pattern, and the viability of the shell–infill turbine blade model as an alternative to the conventional shell-spar model was determined. Out of a selection of infills, the best infill pattern was determined as the hexagonal infill pattern oriented in-plane. A representative volume element was modeled in ANSYS Material Designer, resulting in the homogenized properties of the in-plane hexagonal lattice. After validation, the homogenized properties were applied to the tidal turbine blade. The shell–infill model was based on the volume of the final shell-spar model which had a blade deflection of 9.720% of the blade length. The difference in the deflection between the homogenized infill and the spar cross-section was 0.00125% with a maximum stress of 170.3 MPa which was within the tensile strength and flexure strength of the carbon fiber with onyx base material. Conclusively, the homogenized infill was determined as a suitable alternative to the spar cross-section. The best orientation of the infill relative to the horizontal orientation of the blade was 0 degrees; however, the lack of trend made it inconclusive whether 0 degrees was the absolute optimal infill orientation.

Suggested Citation

  • Glecelyn M. Galvez & Karl Andrie M. Olivar & Francis Rey G. Tolentino & Louis Angelo M. Danao & Binoe E. Abuan, 2022. "Finite Element Analysis of Different Infill Patterns for 3D Printed Tidal Turbine Blade," Sustainability, MDPI, vol. 15(1), pages 1-23, December.
    • Handle: RePEc:gam:jsusta:v:15:y:2022:i:1:p:713-:d:1021083
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/1/713/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/1/713/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Bahaj, A.S. & Batten, W.M.J. & McCann, G., 2007. "Experimental verifications of numerical predictions for the hydrodynamic performance of horizontal axis marine current turbines," Renewable Energy, Elsevier, vol. 32(15), pages 2479-2490.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Biçakli, Mickaël & Razaaly, Nassim & Chatellier, Ludovic, 2025. "Multi-fidelity optimization of tidal turbine blades using calibration and hierarchical kriging," Energy, Elsevier, vol. 341(C).
    2. Li, Liang & Gao, Yan & Yuan, Zhiming & Day, Sandy & Hu, Zhiqiang, 2018. "Dynamic response and power production of a floating integrated wind, wave and tidal energy system," Renewable Energy, Elsevier, vol. 116(PA), pages 412-422.
    3. Ilias Gavriilidis & Yuner Huang, 2021. "Finite Element Analysis of Tidal Turbine Blade Subjected to Impact Loads from Sea Animals," Energies, MDPI, vol. 14(21), pages 1-20, November.
    4. Abutunis, Abdulaziz & Hussein, Rafid & Chandrashekhara, K., 2019. "A neural network approach to enhance blade element momentum theory performance for horizontal axis hydrokinetic turbine application," Renewable Energy, Elsevier, vol. 136(C), pages 1281-1293.
    5. Faizan, Muhammad & Badshah, Saeed & Badshah, Mujahid & Haider, Basharat Ali, 2022. "Performance and wake analysis of horizontal axis tidal current turbine using Improved Delayed Detached Eddy Simulation," Renewable Energy, Elsevier, vol. 184(C), pages 740-752.
    6. Xu, Jian & Wang, Longyan & Yuan, Jianping & Luo, Zhaohui & Wang, Zilu & Zhang, Bowen & Tan, Andy C.C., 2024. "DLFSI: A deep learning static fluid-structure interaction model for hydrodynamic-structural optimization of composite tidal turbine blade," Renewable Energy, Elsevier, vol. 224(C).
    7. Chen, Long & Lam, Wei-Haur, 2015. "A review of survivability and remedial actions of tidal current turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 891-900.
    8. Yong Ma & Chao Hu & Yulong Li & Rui Deng, 2018. "Research on the Hydrodynamic Performance of a Vertical Axis Current Turbine with Forced Oscillation," Energies, MDPI, vol. 11(12), pages 1-20, November.
    9. Frost, Carwyn H. & Evans, Paul S. & Harrold, Magnus J. & Mason-Jones, Allan & O'Doherty, Tim & O'Doherty, Daphne M., 2017. "The impact of axial flow misalignment on a tidal turbine," Renewable Energy, Elsevier, vol. 113(C), pages 1333-1344.
    10. Zhang, Yuquan & Zang, Wei & Zheng, Jinhai & Cappietti, Lorenzo & Zhang, Jisheng & Zheng, Yuan & Fernandez-Rodriguez, E., 2021. "The influence of waves propagating with the current on the wake of a tidal stream turbine," Applied Energy, Elsevier, vol. 290(C).
    11. Wang, Wen-Quan & Yin, Rui & Yan, Yan, 2019. "Design and prediction hydrodynamic performance of horizontal axis micro-hydrokinetic river turbine," Renewable Energy, Elsevier, vol. 133(C), pages 91-102.
    12. Arturo Ortega & Joseph Praful Tomy & Jonathan Shek & Stephane Paboeuf & David Ingram, 2020. "An Inter-Comparison of Dynamic, Fully Coupled, Electro-Mechanical, Models of Tidal Turbines," Energies, MDPI, vol. 13(20), pages 1-19, October.
    13. Shirasawa, Katsutoshi & Tokunaga, Kohei & Iwashita, Hidetsugu & Shintake, Tsumoru, 2016. "Experimental verification of a floating ocean-current turbine with a single rotor for use in Kuroshio currents," Renewable Energy, Elsevier, vol. 91(C), pages 189-195.
    14. Walker, Jessica M. & Flack, Karen A. & Lust, Ethan E. & Schultz, Michael P. & Luznik, Luksa, 2014. "Experimental and numerical studies of blade roughness and fouling on marine current turbine performance," Renewable Energy, Elsevier, vol. 66(C), pages 257-267.
    15. Rourke, Fergal O. & Boyle, Fergal & Reynolds, Anthony, 2010. "Marine current energy devices: Current status and possible future applications in Ireland," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 1026-1036, April.
    16. Amelio, Mario & Barbarelli, Silvio & Florio, Gaetano & Scornaienchi, Nino Michele & Minniti, Giovanni & Cutrupi, Antonino & Sánchez-Blanco, Manuel, 2012. "Innovative tidal turbine with central deflector for the exploitation of river and sea currents in on-shore installations," Applied Energy, Elsevier, vol. 97(C), pages 944-955.
    17. Naik, Kartik & Mangano, Marco & Knight, Bradford G. & Seraj, Sabet & Liao, Yingqian & Park, Jeongbin & Pan, Yulin & Martins, Joaquim R.R.A. & Maki, Kevin J. & Sun, Jing, 2025. "Experimental performance comparison of Ducted and Freestream hydrokinetic turbines," Renewable Energy, Elsevier, vol. 251(C).
    18. Payne, Grégory S. & Stallard, Tim & Martinez, Rodrigo, 2017. "Design and manufacture of a bed supported tidal turbine model for blade and shaft load measurement in turbulent flow and waves," Renewable Energy, Elsevier, vol. 107(C), pages 312-326.
    19. Bahaj, AbuBakr S., 2011. "Generating electricity from the oceans," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(7), pages 3399-3416, September.
    20. Verbeek, M.C. & Talstra, H. & Labeur, R.J. & Uijttewaal, W.S.J., 2024. "Modelling and analysis of the horizontal configuration of tidal fences in barrages," Renewable Energy, Elsevier, vol. 222(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2022:i:1:p:713-:d:1021083. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.