IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i14p8031-d596777.html
   My bibliography  Save this article

A Review of the Utilization of Coal Bottom Ash (CBA) in the Construction Industry

Author

Listed:
  • Syakirah Afiza Mohammed

    (Center for Transportation Research, Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia
    Faculty of Civil Engineering Technology, Universiti Malaysia Perlis, Perlis 02600, Malaysia)

  • Suhana Koting

    (Center for Transportation Research, Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia)

  • Herda Yati Binti Katman

    (Department of Civil Engineering, Putrajaya Campus, Universiti Tenaga Nasional (UNITEN), Jalan IKRAM-UNITEN, Kajang 43000, Malaysia)

  • Ali Mohammed Babalghaith

    (Center for Transportation Research, Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia)

  • Muhamad Fazly Abdul Patah

    (Department of Chemical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia)

  • Mohd Rasdan Ibrahim

    (Center for Transportation Research, Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia)

  • Mohamed Rehan Karim

    (Transportation Science Society of Malaysia, Department of Civil Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur 50603, Malaysia)

Abstract

One effective method to minimize the increasing cost in the construction industry is by using coal bottom ash waste as a substitute material. The high volume of coal bottom ash waste generated each year and the improper disposal methods have raised a grave pollution concern because of the harmful impact of the waste on the environment and human health. Recycling coal bottom ash is an effective way to reduce the problems associated with its disposal. This paper reviews the current physical and chemical and utilization of coal bottom ash as a substitute material in the construction industry. The main objective of this review is to highlight the potential of recycling bottom ash in the field of civil construction. This review encourages and promotes effective recycling of coal bottom ash and identifies the vast range of coal bottom ash applications in the construction industry.

Suggested Citation

  • Syakirah Afiza Mohammed & Suhana Koting & Herda Yati Binti Katman & Ali Mohammed Babalghaith & Muhamad Fazly Abdul Patah & Mohd Rasdan Ibrahim & Mohamed Rehan Karim, 2021. "A Review of the Utilization of Coal Bottom Ash (CBA) in the Construction Industry," Sustainability, MDPI, vol. 13(14), pages 1-16, July.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:14:p:8031-:d:596777
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/14/8031/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/14/8031/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ali Mohammed Babalghaith & Suhana Koting & Nor Hafizah Ramli Sulong & Mohamed Rehan Karim & Syakirah Afiza Mohammed & Mohd Rasdan Ibrahim, 2020. "Effect of Palm Oil Clinker (POC) Aggregate on the Mechanical Properties of Stone Mastic Asphalt (SMA) Mixtures," Sustainability, MDPI, vol. 12(7), pages 1-19, March.
    2. Jorge Suárez-Macías & Juan María Terrones-Saeta & Francisco Javier Iglesias-Godino & Francisco Antonio Corpas-Iglesias, 2021. "Evaluation of Physical, Chemical, and Environmental Properties of Biomass Bottom Ash for Use as a Filler in Bituminous Mixtures," Sustainability, MDPI, vol. 13(8), pages 1-15, April.
    3. Inayat, Abrar & Inayat, Muddasser & Shahbaz, Muhammad & Sulaiman, Shaharin A. & Raza, Mohsin & Yusup, Suzana, 2020. "Parametric analysis and optimization for the catalytic air gasification of palm kernel shell using coal bottom ash as catalyst," Renewable Energy, Elsevier, vol. 145(C), pages 671-681.
    4. Lior, Noam, 2010. "Sustainable energy development: The present (2009) situation and possible paths to the future," Energy, Elsevier, vol. 35(10), pages 3976-3994.
    5. Ankur, Nitin & Singh, Navdeep, 2021. "Performance of cement mortars and concretes containing coal bottom ash: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Georgiadou, Maria Christina & Hacking, Theophilus & Guthrie, Peter, 2012. "A conceptual framework for future-proofing the energy performance of buildings," Energy Policy, Elsevier, vol. 47(C), pages 145-155.
    2. Sarah C. Andersen & Harpa Birgisdottir & Morten Birkved, 2022. "Life Cycle Assessments of Circular Economy in the Built Environment—A Scoping Review," Sustainability, MDPI, vol. 14(11), pages 1-31, June.
    3. Dutta, Rohan & Ghosh, Parthasarathi & Chowdhury, Kanchan, 2011. "Customization and validation of a commercial process simulator for dynamic simulation of Helium liquefier," Energy, Elsevier, vol. 36(5), pages 3204-3214.
    4. Mahavar, S. & Rajawat, P. & Marwal, V.K. & Punia, R.C. & Dashora, P., 2013. "Modeling and on-field testing of a Solar Rice Cooker," Energy, Elsevier, vol. 49(C), pages 404-412.
    5. Hu Hu & Kan Yang & Lyuwen Su & Zhe Yang, 2019. "A Novel Adaptive Multi-Objective Particle Swarm Optimization Based on Decomposition and Dominance for Long-term Generation Scheduling of Cascade Hydropower System," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 33(11), pages 4007-4026, September.
    6. Zappini, Giovanni & Cocca, Paola & Rossi, Diana, 2010. "Performance analysis of energy recovery in an Italian municipal solid waste landfill," Energy, Elsevier, vol. 35(12), pages 5063-5069.
    7. Charikleia Karakosta, 2016. "A Holistic Approach for Addressing the Issue of Effective Technology Transfer in the Frame of Climate Change," Energies, MDPI, vol. 9(7), pages 1-20, June.
    8. Adnan Ahmad & Asif Khan & Nadeem Javaid & Hafiz Majid Hussain & Wadood Abdul & Ahmad Almogren & Atif Alamri & Iftikhar Azim Niaz, 2017. "An Optimized Home Energy Management System with Integrated Renewable Energy and Storage Resources," Energies, MDPI, vol. 10(4), pages 1-35, April.
    9. Lund, Henrik & Hvelplund, Frede, 2012. "The economic crisis and sustainable development: The design of job creation strategies by use of concrete institutional economics," Energy, Elsevier, vol. 43(1), pages 192-200.
    10. Shen, Yung-Chi & Chou, Chiyang James & Lin, Grace T.R., 2011. "The portfolio of renewable energy sources for achieving the three E policy goals," Energy, Elsevier, vol. 36(5), pages 2589-2598.
    11. Hugé, Jean & Waas, Tom & Eggermont, Gilbert & Verbruggen, Aviel, 2011. "Impact assessment for a sustainable energy future'Reflections and practical experiences," Energy Policy, Elsevier, vol. 39(10), pages 6243-6253, October.
    12. Li, Jie & Chang, Guozhang & Song, Ke & Hao, Bolun & Wang, Cuiping & Zhang, Jian & Yue, Guangxi & Hu, Shugang, 2023. "Influence of coal bottom ash additives on catalytic reforming of biomass pyrolysis gaseous tar and biochar/steam gasification reactivity," Renewable Energy, Elsevier, vol. 203(C), pages 434-444.
    13. Pelenur, Marcos J. & Cruickshank, Heather J., 2012. "Closing the Energy Efficiency Gap: A study linking demographics with barriers to adopting energy efficiency measures in the home," Energy, Elsevier, vol. 47(1), pages 348-357.
    14. Kim, Seunghyok & Koo, Jamin & Lee, Chang Jun & Yoon, En Sup, 2012. "Optimization of Korean energy planning for sustainability considering uncertainties in learning rates and external factors," Energy, Elsevier, vol. 44(1), pages 126-134.
    15. Nicu Bizon & Phatiphat Thounthong, 2020. "Energy Efficiency and Fuel Economy of a Fuel Cell/Renewable Energy Sources Hybrid Power System with the Load-Following Control of the Fueling Regulators," Mathematics, MDPI, vol. 8(2), pages 1-22, January.
    16. Zhiqiang Zhu & Xuechi Zhang & Mengqing Xue & Yaoyao Song, 2023. "Eco-Efficiency and Its Evolutionary Change under Regulatory Constraints: A Case Study of Chinese Transportation Industry," Sustainability, MDPI, vol. 15(9), pages 1-18, April.
    17. Rezk, Hegazy & Inayat, Abrar & Abdelkareem, Mohammad A. & Olabi, Abdul G. & Nassef, Ahmed M., 2022. "Optimal operating parameter determination based on fuzzy logic modeling and marine predators algorithm approaches to improve the methane production via biomass gasification," Energy, Elsevier, vol. 239(PB).
    18. Li, Shouzhuang & Inayat, Muddasser & Järvinen, Mika, 2023. "Steam gasification of polyethylene terephthalate (PET) with CaO in a bubbling fluidized bed gasifier for enriching H2 in syngas with Response Surface Methodology (RSM)," Applied Energy, Elsevier, vol. 348(C).
    19. González-García, Sara & Iribarren, Diego & Susmozas, Ana & Dufour, Javier & Murphy, Richard J., 2012. "Life cycle assessment of two alternative bioenergy systems involving Salix spp. biomass: Bioethanol production and power generation," Applied Energy, Elsevier, vol. 95(C), pages 111-122.
    20. Dadouche, F. & Béthoux, O. & Kleider, J.-P., 2011. "New silicon thin-film technology associated with original DC–DC converter: An economic alternative way to improve photovoltaic systems efficiencies," Energy, Elsevier, vol. 36(3), pages 1749-1757.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:14:p:8031-:d:596777. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.