IDEAS home Printed from https://ideas.repec.org/a/gam/jijerp/v19y2022i23p15755-d985236.html
   My bibliography  Save this article

Catalytic Pyrolysis of Sawdust with Desulfurized Fly Ash for Pyrolysis Gas Upgrading

Author

Listed:
  • Jinling Song

    (School of Civil Engineering, University of Science and Technology Liaoning, Qianshan Road, Anshan 114051, China)

  • Chuyang Tang

    (School of Civil Engineering, University of Science and Technology Liaoning, Qianshan Road, Anshan 114051, China)

  • Xinyuan An

    (School of Civil Engineering, University of Science and Technology Liaoning, Qianshan Road, Anshan 114051, China)

  • Yi Wang

    (School of Civil Engineering, University of Science and Technology Liaoning, Qianshan Road, Anshan 114051, China)

  • Shankun Zhou

    (School of Civil Engineering, University of Science and Technology Liaoning, Qianshan Road, Anshan 114051, China)

  • Chunhong Huang

    (School of Civil Engineering, University of Science and Technology Liaoning, Qianshan Road, Anshan 114051, China)

Abstract

In this study, the catalytic effects of desulfurized fly ash (DFA) on the gaseous products of sawdust (SD) pyrolysis were investigated in a tubular furnace. The results indicated that DFA catalyzed the process of SD decomposition to improve the hydrogen content and the calorific value of pyrolysis gas. As to its effect on pyrolysis products, DFA increased the non-oxide content of CH 4 , C 3 H 4 , and H 2 in pyrolysis gas by 1.4-, 1.8-, and 2.3-fold, respectively. Meanwhile, the catalytic effect of DFA reduced the CO and CO 2 yields during DFA/SD pyrolysis. Based on the model compound method, CaSO 3 and Ca(OH) 2 in DFA was proved to have quite different catalytic effects on pyrolysis gas components. Ca(OH) 2 accelerated the formation of CH 4 and H 2 through the cracking of methoxyl during lignin and cellulose degradation, while CaSO 3 favored the generation of CO and CO 2 due to the carbonyl and carboxyl of lignin in SD. CaSO 3 also catalyzed SD pyrolysis to promote the C 3 H 4 yield in pyrolysis gas. Overall, the catalytic pyrolysis of SD with DFA yielded negative-carbon emission, which upgraded the quality of the pyrolysis gas.

Suggested Citation

  • Jinling Song & Chuyang Tang & Xinyuan An & Yi Wang & Shankun Zhou & Chunhong Huang, 2022. "Catalytic Pyrolysis of Sawdust with Desulfurized Fly Ash for Pyrolysis Gas Upgrading," IJERPH, MDPI, vol. 19(23), pages 1-11, November.
    • Handle: RePEc:gam:jijerp:v:19:y:2022:i:23:p:15755-:d:985236
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1660-4601/19/23/15755/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1660-4601/19/23/15755/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Prashanth Reddy Buchireddy & Devin Peck & Mark Zappi & Ray Mark Bricka, 2021. "Catalytic Hot Gas Cleanup of Biomass Gasification Producer Gas via Steam Reforming Using Nickel-Supported Clay Minerals," Energies, MDPI, vol. 14(7), pages 1-21, March.
    2. Wu, Yujian & Wang, Haoyu & Li, Haoyang & Han, Xue & Zhang, Mingyuan & Sun, Yan & Fan, Xudong & Tu, Ren & Zeng, Yimin & Xu, Chunbao Charles & Xu, Xiwei, 2022. "Applications of catalysts in thermochemical conversion of biomass (pyrolysis, hydrothermal liquefaction and gasification): A critical review," Renewable Energy, Elsevier, vol. 196(C), pages 462-481.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Qin, Tao & Lu, Qiuxiang & Xiang, Hao & Luo, Xiulin & Shenfu, Yuan, 2023. "Ca promoted Ni–Co bimetallic catalyzed coal pyrolysis and char steam gasification," Energy, Elsevier, vol. 282(C).
    2. Das, Probir & Khan, Shoyeb & AbdulQuadir, Mohammed & Thaher, Mahmoud Ibrahim & Hawari, Alaa H. & Alshamri, Noora & AlGhasal, Ghamza & Al-Jabri, Hareb M.J., 2023. "Biocrude oil production from a self-settling marine cyanobacterium, Chroococcidiopsis sp., using a biorefinery approach," Renewable Energy, Elsevier, vol. 203(C), pages 1-9.
    3. Li, Longzhi & Cai, Dongqiang & Zhang, Lianjie & Zhang, Yue & Zhao, Zhiyang & Zhang, Zhonglei & Sun, Jifu & Tan, Yongdong & Zou, Guifu, 2023. "Synergistic effects during pyrolysis of binary mixtures of biomass components using microwave-assisted heating coupled with iron base tip-metal," Renewable Energy, Elsevier, vol. 203(C), pages 312-322.
    4. Cueva Zepeda, Lolita & Griffin, Gregory & Shah, Kalpit & Al-Waili, Ibrahim & Parthasarathy, Rajarathinam, 2023. "Energy potential, flow characteristics and stability of water and alcohol-based rice-straw biochar slurry fuel," Renewable Energy, Elsevier, vol. 207(C), pages 60-72.
    5. Mateusz Wnukowski & Wojciech Moroń, 2021. "Warm Plasma Application in Tar Conversion and Syngas Valorization: The Fate of Hydrogen Sulfide," Energies, MDPI, vol. 14(21), pages 1-16, November.
    6. Lin, Pengmusen & Yu, Xinyu & Wang, Han & Ming, Hui & Ge, Shengbo & Liu, Fang & Peng, Haowei & Sonne, Christian & Zhang, Libo, 2023. "Life cycle assessment of bio-oil prepared from low-temperature hydrothermal oxide-catalyzed cotton stalk," Energy, Elsevier, vol. 282(C).
    7. Mumtaz, Hamza & Sobek, Szymon & Sajdak, Marcin & Muzyka, Roksana & Drewniak, Sabina & Werle, Sebastian, 2023. "Oxidative liquefaction as an alternative method of recycling and the pyrolysis kinetics of wind turbine blades," Energy, Elsevier, vol. 278(PB).
    8. Mumtaz, Hamza & Sobek, Szymon & Sajdak, Marcin & Muzyka, Roksana & Werle, Sebastian, 2023. "An experimental investigation and process optimization of the oxidative liquefaction process as the recycling method of the end-of-life wind turbine blades," Renewable Energy, Elsevier, vol. 211(C), pages 269-278.
    9. Yu, Yixuan & Liu, Huai & Zhang, Junhua & Zhang, Heng & Sun, Yong & Peng, Lincai, 2023. "Highly efficient, amorphous bimetal Ni-Fe borides-catalyzed hydrogenolysis of 5-hydroxymethylfurfural into 2,5-dimethylfuran," Renewable Energy, Elsevier, vol. 209(C), pages 453-461.
    10. Marcin Pajak & Grzegorz Brus & Janusz S. Szmyd, 2021. "Catalyst Distribution Optimization Scheme for Effective Green Hydrogen Production from Biogas Reforming," Energies, MDPI, vol. 14(17), pages 1-14, September.
    11. Minkang Liu & Yimin Zeng, 2023. "Key Processing Factors in Hydrothermal Liquefaction and Their Impacts on Corrosion of Reactor Alloys," Sustainability, MDPI, vol. 15(12), pages 1-18, June.
    12. Verma, Shivpal & Dregulo, Andrei Mikhailovich & Kumar, Vinay & Bhargava, Preeti Chaturvedi & Khan, Nawaz & Singh, Anuradha & Sun, Xinwei & Sindhu, Raveendran & Binod, Parameswaran & Zhang, Zengqiang &, 2023. "Reaction engineering during biomass gasification and conversion to energy," Energy, Elsevier, vol. 266(C).
    13. Li, Chao & Zhang, Lei & Li, Yuannian & Li, Baihong & Fan, Mengjiao & Zhang, Lijun & Zhang, Shu & Li, Bin & Wang, Shuang & Hu, Xun, 2023. "Pyrolysis of sawdust impregnated with xylose: Tailoring property of biochar with sugar-derived intermediates," Renewable Energy, Elsevier, vol. 214(C), pages 55-64.
    14. Jhulimar Castro & Jonathan Leaver & Shusheng Pang, 2022. "Simulation and Techno-Economic Assessment of Hydrogen Production from Biomass Gasification-Based Processes: A Review," Energies, MDPI, vol. 15(22), pages 1-37, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jijerp:v:19:y:2022:i:23:p:15755-:d:985236. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.