CFD-DEM Modeling and Experimental Verification of Heat Transfer Behaviors of Cylindrical Biomass Particles with Super-Ellipsoid Model

The heat transfer (HT) characteristics of cylindrical biomass particles (CBPs) in fluidized beds (FBs) are important for their drying, direct combustion, and thermochemical transformation. To provide a deeper insight into the complex mechanisms behind the HT behaviors involving CBPs, this study developed a cylindrical particle HT model within the framework of computational fluid dynamics coupled with the discrete element method (CFD-DEM) in which the CBPs were characterized by the super-ellipsoid model, which has the unique merit of striking a balance between computational accuracy and efficiency. The newly developed heat transfer model considers particle–particle (P-P), particle–wall (P-W), and fluid–particle (F-P). Its accuracy was verified by comparing the numerical results with the experimental infrared thermography measurements in terms of the temperature evolution of the cylindrical particles. The effects of the gas velocity, inlet temperature, and thermal conductivity of particles on the HT behaviors of the CBPs were investigated comprehensively. The results demonstrated the following: (1) Gas velocity can improve the uniformity of bed temperature distribution and shorten the fluctuation process of bed temperature uniformity. (2) A 26.8% increase in inlet temperature leads to a 13.4% increase in the proportion of particles with an orientation in the range of 60–90°. (3) The thermal conductivity of particles has no obvious influence on the bed temperature, convective HT rate, or orientation of particles.