IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i14p3499-d1436707.html
   My bibliography  Save this article

Design and Manufacturing Challenges in PEMFC Flow Fields—A Review

Author

Listed:
  • Prithvi Raj Pedapati

    (Automotive Research Center, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 632014, India)

  • Shankar Raman Dhanushkodi

    (Dhanushkodi Research Group, Vellore Institute of Technology, Vellore 632014, India)

  • Ramesh Kumar Chidambaram

    (Automotive Research Center, School of Mechanical Engineering, Vellore Institute of Technology, Vellore 632014, India)

  • Dawid Taler

    (Department of Thermal Processes, Air Protection and Waste Management, Cracow University of Technology, 31-155 Cracow, Poland)

  • Tomasz Sobota

    (Department of Thermal Processes, Air Protection and Waste Management, Cracow University of Technology, 31-155 Cracow, Poland)

  • Jan Taler

    (Department of Energy, Cracow University of Technology, 31-864 Cracow, Poland)

Abstract

Proton exchange membrane fuel cells are a prime choice for substitute electricity producers. Membrane electrode assembly (MEA), bipolar electrodes, and current collectors belong to only a limited number of primary parts of the proton exchange membrane fuel cell (PEMFC). Bipolar plates are among the most famous elements in the fuel cell; they are responsible for the electrochemical reaction, as well as the flow of gases from one bipolar plate to another. A bipolar plate is to be a good electro-conducting, non-corrosive, and a high mechanical strength product. The attainability of the specification is achieved by graphite and metallic materials, each one having its own merits and demerits that are discussed in this article. Likewise, making the second pass for the flow pattern is equally important for the cell to have good performance and efficiency. The emergence of innovative and new bipolar plate designs has caused the achievement of high performance of these plates. The present review article principally focuses on the experimental study of diverse flow fields in the design of PEMFC and on the influence of various geometrical properties on the general operation of fuel cells made of PEMFC, and also on the manufacturing procedure utilized for building contemporary fuel cells.

Suggested Citation

  • Prithvi Raj Pedapati & Shankar Raman Dhanushkodi & Ramesh Kumar Chidambaram & Dawid Taler & Tomasz Sobota & Jan Taler, 2024. "Design and Manufacturing Challenges in PEMFC Flow Fields—A Review," Energies, MDPI, vol. 17(14), pages 1-34, July.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:14:p:3499-:d:1436707
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/14/3499/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/14/3499/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. James Chilver-Stainer & Anas F. A. Elbarghthi & Chuang Wen & Mi Tian, 2023. "Power Output Optimisation via Arranging Gas Flow Channels for Low-Temperature Polymer Electrolyte Membrane Fuel Cell (PEMFC) for Hydrogen-Powered Vehicles," Energies, MDPI, vol. 16(9), pages 1-18, April.
    2. Yulin Wang & Xiangling Liao & Guokun Liu & Haokai Xu & Chao Guan & Huixuan Wang & Hua Li & Wei He & Yanzhou Qin, 2023. "Review of Flow Field Designs for Polymer Electrolyte Membrane Fuel Cells," Energies, MDPI, vol. 16(10), pages 1-54, May.
    3. Arun Saco, S. & Thundil Karuppa Raj, R. & Karthikeyan, P., 2016. "A study on scaled up proton exchange membrane fuel cell with various flow channels for optimizing power output by effective water management using numerical technique," Energy, Elsevier, vol. 113(C), pages 558-573.
    4. Qiu, Diankai & Peng, Linfa & Tang, Jiayu & Lai, Xinmin, 2020. "Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels," Energy, Elsevier, vol. 198(C).
    5. Chiu, Han-Chieh & Jang, Jer-Huan & Yan, Wei-Mon & Li, Hung-Yi & Liao, Chih-Cheng, 2012. "A three-dimensional modeling of transport phenomena of proton exchange membrane fuel cells with various flow fields," Applied Energy, Elsevier, vol. 96(C), pages 359-370.
    6. Guodong Zhang & Zhen Guan & Da Li & Guoxiang Li & Shuzhan Bai & Ke Sun & Hao Cheng, 2023. "Optimization Design of a Parallel Flow Field for PEMFC with Bosses in Flow Channels," Energies, MDPI, vol. 16(14), pages 1-26, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Byung Gyu Kang & Ye Rim Kwon & Ki Won Hong & Sun Ki Kwon & Hyeon Min Lee & Dong Kun Song & Ji Woong Jeon & Do Young Jung & Dohyun Go & Gu Young Cho, 2025. "Performance Improvement of Proton Exchange Membrane Fuel Cells with a TiO 2 Sputtered Gas Diffusion Layer Under Low-Humidity Conditions," Energies, MDPI, vol. 18(6), pages 1-17, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Rocha, C. & Knöri, T. & Ribeirinha, P. & Gazdzicki, P., 2024. "A review on flow field design for proton exchange membrane fuel cells: Challenges to increase the active area for MW applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 192(C).
    2. Li, Yuehua & Pei, Pucheng & Ma, Ze & Ren, Peng & Wu, Ziyao & Chen, Dongfang & Huang, Hao, 2019. "Characteristic analysis in lowering current density based on pressure drop for avoiding flooding in proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 248(C), pages 321-329.
    3. Zhang, Zhonghao & Guo, Mengdi & Yu, Zhonghao & Yao, Siyue & Wang, Jin & Qiu, Diankai & Peng, Linfa, 2022. "A novel cooperative design with optimized flow field on bipolar plates and hybrid wettability gas diffusion layer for proton exchange membrane unitized regenerative fuel cell," Energy, Elsevier, vol. 239(PD).
    4. Guo, Hang & Liu, Xuan & Zhao, Jian Fu & Ye, Fang & Ma, Chong Fang, 2014. "Experimental study of two-phase flow in a proton exchange membrane fuel cell in short-term microgravity condition," Applied Energy, Elsevier, vol. 136(C), pages 509-518.
    5. Jiao, Kui & Bachman, John & Zhou, Yibo & Park, Jae Wan, 2014. "Effect of induced cross flow on flow pattern and performance of proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 115(C), pages 75-82.
    6. Saeidfar, Asal & Yesilyurt, Serhat, 2023. "Numerical investigation of the effects of catalyst layer composition and channel to rib width ratios for low platinum loaded PEMFCs," Applied Energy, Elsevier, vol. 339(C).
    7. Elisabetta Arato & Marzia Pinna & Michela Mazzoccoli & Barbara Bosio, 2016. "Gas-Phase Mass-Transfer Resistances at Polymeric Electrolyte Membrane Fuel Cells Electrodes: Theoretical Analysis on the Effectiveness of Interdigitated and Serpentine Flow Arrangements," Energies, MDPI, vol. 9(4), pages 1-16, March.
    8. Rahmani, Ebrahim & Moradi, Tofigh & Ghandehariun, Samane & Naterer, Greg F. & Ranjbar, Amirhossein, 2023. "Enhanced mass transfer and water discharge in a proton exchange membrane fuel cell with a raccoon channel flow field," Energy, Elsevier, vol. 264(C).
    9. Tian, Cong & Yuan, Fang & Deng, Tianlun & He, Qianhui & Hu, Cen & Chen, Yong & Liu, Wei, 2024. "Coupled optimization of auxiliary channels and porosity gradient of GDL for PEMFC," Energy, Elsevier, vol. 301(C).
    10. Wang, H.Y. & Yang, W.J. & Kim, Y.B., 2014. "Analyzing in-plane temperature distribution via a micro-temperature sensor in a unit polymer electrolyte membrane fuel cell," Applied Energy, Elsevier, vol. 124(C), pages 148-155.
    11. Huo, Sen & Cooper, Nathanial James & Smith, Travis Lee & Park, Jae Wan & Jiao, Kui, 2017. "Experimental investigation on PEM fuel cell cold start behavior containing porous metal foam as cathode flow distributor," Applied Energy, Elsevier, vol. 203(C), pages 101-114.
    12. Xiong, Kangning & Wu, Wei & Wang, Shuangfeng & Zhang, Lin, 2021. "Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: A review," Applied Energy, Elsevier, vol. 301(C).
    13. Liu, Jiaran & Tan, Jinzhu & Yang, Weizhan & Li, Yang & Wang, Chao, 2021. "Better electrochemical performance of PEMFC under a novel pneumatic clamping mechanism," Energy, Elsevier, vol. 229(C).
    14. Qiu, Diankai & Zhou, Xiangyang & Chen, Minxue & Xu, Zhutian & Peng, Linfa, 2023. "Optimization of control strategy for air-cooled PEMFC based on in-situ observation of internal reaction state," Applied Energy, Elsevier, vol. 350(C).
    15. Yin, Cong & Song, Yating & Liu, Meiru & Gao, Yan & Li, Kai & Qiao, Zemin & Tang, Hao, 2022. "Investigation of proton exchange membrane fuel cell stack with inversely phased wavy flow field design," Applied Energy, Elsevier, vol. 305(C).
    16. Wu, Horng-Wen, 2016. "A review of recent development: Transport and performance modeling of PEM fuel cells," Applied Energy, Elsevier, vol. 165(C), pages 81-106.
    17. Suprava Chakraborty & Devaraj Elangovan & Karthikeyan Palaniswamy & Ashley Fly & Dineshkumar Ravi & Denis Ashok Sathia Seelan & Thundil Karuppa Raj Rajagopal, 2022. "A Review on the Numerical Studies on the Performance of Proton Exchange Membrane Fuel Cell (PEMFC) Flow Channel Designs for Automotive Applications," Energies, MDPI, vol. 15(24), pages 1-21, December.
    18. Fanyue Qian & Weijun Gao & Dan Yu & Yongwen Yang & Yingjun Ruan, 2022. "An Analysis of the Potential of Hydrogen Energy Technology on Demand Side Based on a Carbon Tax: A Case Study in Japan," Energies, MDPI, vol. 16(1), pages 1-23, December.
    19. Baricci, Andrea & Mereu, Riccardo & Messaggi, Mirko & Zago, Matteo & Inzoli, Fabio & Casalegno, Andrea, 2017. "Application of computational fluid dynamics to the analysis of geometrical features in PEM fuel cells flow fields with the aid of impedance spectroscopy," Applied Energy, Elsevier, vol. 205(C), pages 670-682.
    20. Singdeo, Debanand & Dey, Tapobrata & Gaikwad, Shrihari & Andreasen, Søren Juhl & Ghosh, Prakash C., 2017. "A new modified-serpentine flow field for application in high temperature polymer electrolyte fuel cell," Applied Energy, Elsevier, vol. 195(C), pages 13-22.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:14:p:3499-:d:1436707. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.