IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i7p3005-d1107126.html
   My bibliography  Save this article

Heat-Transfer Mechanisms in a Solar Cooking Pot with Thermal Energy Storage

Author

Listed:
  • Maarten Vanierschot

    (Department of Mechanical Engineering, KU Leuven, B-3001 Leuven, Belgium
    Material Science, Innovation and Modelling (MaSIM), North-West University, Mmabatho 2745, South Africa)

  • Ashmore Mawire

    (Material Science, Innovation and Modelling (MaSIM), North-West University, Mmabatho 2745, South Africa)

Abstract

This paper presents a detailed analysis of the heat-transfer mechanisms in a solar cooking pot with thermal energy storage using computational fluid dynamics (CFD). The vast majority of studies on solar cookers have been experimentally performed using local temperature measurements with thermocouples. Therefore, the heat-transfer mechanisms can only be studied using lumped capacitance models as the detailed profiles of temperature and heat fluxes inside the cooker are missing. CFD is an alternative modelling technique to obtain this detailed information. In this study, sunflower oil is used as both cooking fluid and energy storage medium. Comparison of the model with the available experimental data shows that the deviation is within the measurement accuracy of the latter. Hence, despite some assumptions, such as axisymmetry and an estimation of the heat transfer parameters to the ambient, the model is able to describe the involved physical processes accurately. It is shown that, initially, the main heat-transfer mechanism is conduction from the cooker’s bottom towards the thermal energy storage (TES). This heats up the oil near the bottom of the TES, creating convective plumes, which significantly enhance the heat transfer. In equilibrium, about 79% of the incoming solar flux goes towards heating up the TES. The heat is further transferred to the pot, where convective plumes also appear much later in time. However, the heat transfer to the pot is much smaller, with an average heat-transfer coefficient of 1.6 Wm − 2 K − 1 compared to 7.5 Wm − 2 K − 1 for the TES. After two hours of charging, the oil reaches a temperature of 397 K in the TES and 396 K in the cooking pot. Moreover, the temperature distribution in the cooker is quasi-uniform. During the charging period, the storage efficiency of the TES is about 29%. With the results in this study, solar cooking pots with TES can be further optimized towards efficiently transmitting the heat form the solar radiation to the food to be cooked.

Suggested Citation

  • Maarten Vanierschot & Ashmore Mawire, 2023. "Heat-Transfer Mechanisms in a Solar Cooking Pot with Thermal Energy Storage," Energies, MDPI, vol. 16(7), pages 1-12, March.
  • Handle: RePEc:gam:jeners:v:16:y:2023:i:7:p:3005-:d:1107126
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/7/3005/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/16/7/3005/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Domanski, R. & El-Sebaii, A.A. & Jaworski, M., 1995. "Cooking during off-sunshine hours using PCMs as storage media," Energy, Elsevier, vol. 20(7), pages 607-616.
    2. Lecuona, Antonio & Nogueira, José-Ignacio & Ventas, Rubén & Rodríguez-Hidalgo, María-del-Carmen & Legrand, Mathieu, 2013. "Solar cooker of the portable parabolic type incorporating heat storage based on PCM," Applied Energy, Elsevier, vol. 111(C), pages 1136-1146.
    3. Cuce, Erdem & Cuce, Pinar Mert, 2013. "A comprehensive review on solar cookers," Applied Energy, Elsevier, vol. 102(C), pages 1399-1421.
    4. Aramesh, Mohamad & Ghalebani, Mehdi & Kasaeian, Alibakhsh & Zamani, Hosein & Lorenzini, Giulio & Mahian, Omid & Wongwises, Somchai, 2019. "A review of recent advances in solar cooking technology," Renewable Energy, Elsevier, vol. 140(C), pages 419-435.
    5. Nkhonjera, Lameck & Bello-Ochende, Tunde & John, Geoffrey & King’ondu, Cecil K., 2017. "A review of thermal energy storage designs, heat storage materials and cooking performance of solar cookers with heat storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 157-167.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khatri, Rahul & Goyal, Rahul & Sharma, Ravi Kumar, 2021. "Advances in the developments of solar cooker for sustainable development: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    2. Aramesh, Mohamad & Ghalebani, Mehdi & Kasaeian, Alibakhsh & Zamani, Hosein & Lorenzini, Giulio & Mahian, Omid & Wongwises, Somchai, 2019. "A review of recent advances in solar cooking technology," Renewable Energy, Elsevier, vol. 140(C), pages 419-435.
    3. B C Anilkumar & Ranjith Maniyeri & S Anish, 2023. "Thermal performance assessment of a cylindrical box solar cooker fitted with decahedron outer reflector," Energy & Environment, , vol. 34(3), pages 493-516, May.
    4. Liyew, Kassa W. & Habtu, Nigus G. & Louvet, Yoann & Guta, Dawit D. & Jordan, Ulrike, 2021. "Technical design, costs, and greenhouse gas emissions of solar Injera baking stoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    5. Nkhonjera, Lameck & Bello-Ochende, Tunde & John, Geoffrey & King’ondu, Cecil K., 2017. "A review of thermal energy storage designs, heat storage materials and cooking performance of solar cookers with heat storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 157-167.
    6. Herez, Amal & Ramadan, Mohamad & Khaled, Mahmoud, 2018. "Review on solar cooker systems: Economic and environmental study for different Lebanese scenarios," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 421-432.
    7. Gianluca Coccia & Alessia Aquilanti & Sebastiano Tomassetti & Pio Francesco Muciaccia & Giovanni Di Nicola, 2021. "Experimental Analysis of Nucleation Triggering in a Thermal Energy Storage Based on Xylitol Used in a Portable Solar Box Cooker," Energies, MDPI, vol. 14(18), pages 1-21, September.
    8. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional cooking with solar energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 131-154.
    9. Sunil Indora & Tara C. Kandpal, 2020. "Solar energy for institutional cooking in India: prospects and potential," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 22(8), pages 7153-7175, December.
    10. Saxena, Abhishek & Cuce, Erdem & Tiwari, G.N. & Kumar, Avnish, 2020. "Design and thermal performance investigation of a box cooker with flexible solar collector tubes: An experimental research," Energy, Elsevier, vol. 206(C).
    11. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional and community solar cooking in India using SK-23 and Scheffler solar cookers: A financial appraisal," Renewable Energy, Elsevier, vol. 120(C), pages 501-511.
    12. Kashyap, S. Rahul & Pramanik, Santanu & Ravikrishna, R.V., 2023. "A review of solar, electric and hybrid cookstoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    13. Lecuona, Antonio & Nogueira, José-Ignacio & Ventas, Rubén & Rodríguez-Hidalgo, María-del-Carmen & Legrand, Mathieu, 2013. "Solar cooker of the portable parabolic type incorporating heat storage based on PCM," Applied Energy, Elsevier, vol. 111(C), pages 1136-1146.
    14. Ashmore Mawire & Sibongiseni M. Simelane & Patrick O. Abedigamba, 2021. "Energetic and exergetic performance comparison of three solar cookers for developing countries," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(10), pages 14528-14555, October.
    15. Apaolaza-Pagoaga, Xabier & Carrillo-Andrés, Antonio & Ruivo, Celestino Rodrigues, 2021. "New approach for analysing the effect of minor and major solar cooker design changes: Influence of height trivet on the power of a funnel cooker," Renewable Energy, Elsevier, vol. 179(C), pages 2071-2085.
    16. Mulako D. Mukelabai & K. G. U. Wijayantha & Richard E. Blanchard, 2022. "Hydrogen for Cooking: A Review of Cooking Technologies, Renewable Hydrogen Systems and Techno-Economics," Sustainability, MDPI, vol. 14(24), pages 1-30, December.
    17. Apaolaza-Pagoaga, Xabier & Carrillo-Andrés, Antonio & Rodrigues Ruivo, Celestino, 2022. "Experimental thermal performance evaluation of different configurations of Copenhagen solar cooker," Renewable Energy, Elsevier, vol. 184(C), pages 604-618.
    18. Ole Jørgen Nydal, 2023. "Heat Storage for Cooking: A Discussion on Requirements and Concepts," Energies, MDPI, vol. 16(18), pages 1-27, September.
    19. M. Mofijur & Teuku Meurah Indra Mahlia & Arridina Susan Silitonga & Hwai Chyuan Ong & Mahyar Silakhori & Muhammad Heikal Hasan & Nandy Putra & S.M. Ashrafur Rahman, 2019. "Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview," Energies, MDPI, vol. 12(16), pages 1-20, August.
    20. Fernando Antonanzas-Torres & Ruben Urraca & Camilo Andres Cortes Guerrero & Julio Blanco-Fernandez, 2021. "Solar E-Cooking with Low-Power Solar Home Systems for Sub-Saharan Africa," Sustainability, MDPI, vol. 13(21), pages 1-19, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:7:p:3005-:d:1107126. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.