IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i6p2794-d1100136.html
   My bibliography  Save this article

Numerical Analysis of Heat Transfer within a Rotary Multi-Vane Expander

Author

Listed:
  • Przemysław Błasiak

    (Department of Thermodynamics and Renewable Energy Sources, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland)

  • Piotr Kolasiński

    (Department of Thermodynamics and Renewable Energy Sources, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland)

  • Sindu Daniarta

    (Department of Thermodynamics and Renewable Energy Sources, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
    Department of Energy Engineering, Budapest University of Technology and Economics, Műegyetem rkp. 3, H-1111 Budapest, Hungary)

Abstract

In this paper, the results of numerical investigations on heat transfer in a multi-vane expander (MVE) are reported. MVEs are very interesting for various technological applications because of their advantages (such as, for example, low gas flow capacity and a low expansion ratio). According to a literature study, the heat exchange mechanisms occurring in these machines have not yet undergone in-depth analysis. As a result, there have been very few experimental or modeling results connected to these unquestionably significant processes from both a scientific and practical perspective. Despite the fact that several analytical models have been developed for these phenomena, there is no numerical model dedicated to an MVE. This model was developed by the authors and presented in this paper together with modeling results. Numerical simulations were executed in the ANSYS CFX and focused on defining the expander heat transfer coefficients under various flow circumstances. The results showed inside heat transfer processes in MVEs and, moreover, it was discovered that, in the gap between the vane and the cylinder, there are changes in the fluid’s velocity profile.

Suggested Citation

  • Przemysław Błasiak & Piotr Kolasiński & Sindu Daniarta, 2023. "Numerical Analysis of Heat Transfer within a Rotary Multi-Vane Expander," Energies, MDPI, vol. 16(6), pages 1-32, March.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2794-:d:1100136
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/6/2794/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/6/2794/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Badr, O. & Probert, S.D. & O'Callaghan, P.W., 1985. "Multi-vane expanders: Internal-leakage losses," Applied Energy, Elsevier, vol. 20(1), pages 1-46.
    2. Badr, O. & Hussein, M. & Probert, S.D. & O'Callaghan, P.W., 1984. "Thermal stabilities of mixtures of trichlorofluoroethane and lubricating fluids contained in copper sealed tubes," Applied Energy, Elsevier, vol. 16(1), pages 41-52.
    3. Badr, O. & O'Callaghan, P. W. & Probert, S. D., 1990. "Rankine-cycle systems for harnessing power from low-grade energy sources," Applied Energy, Elsevier, vol. 36(4), pages 263-292.
    4. Piotr Kolasiński & Przemysław Błasiak & Józef Rak, 2016. "Experimental and Numerical Analyses on the Rotary Vane Expander Operating Conditions in a Micro Organic Rankine Cycle System," Energies, MDPI, vol. 9(8), pages 1-15, August.
    5. Badr, O. & Probert, S.D. & O'Callaghan, P., 1985. "Performances of multi-vane expanders," Applied Energy, Elsevier, vol. 20(3), pages 207-234.
    6. Badr, O. & O'Callaghan, P. W. & Probert, S. D., 1985. "Thermodynamic and thermophysical properties of organic working fluids for Rankine-cycle engines," Applied Energy, Elsevier, vol. 19(1), pages 1-40.
    7. Józef Rak & Przemysław Błasiak & Piotr Kolasiński, 2018. "Influence of the Applied Working Fluid and the Arrangement of the Steering Edges on Multi-Vane Expander Performance in Micro ORC System," Energies, MDPI, vol. 11(4), pages 1-16, April.
    8. Badr, O. & O'Callaghan, P. W. & Hussein, M. & Probert, S. D., 1984. "Multi-vane expanders as prime movers for low-grade energy organic Rankine-cycle engines," Applied Energy, Elsevier, vol. 16(2), pages 129-146.
    9. Badr, O. & O'Callaghan, P.W. & Probert, S.D., 1985. "Multi-vane expanders: Geometry and vane kinematics," Applied Energy, Elsevier, vol. 19(3), pages 159-182.
    10. Badr, O. & O'Callaghan, P.W. & Probert, S.D., 1985. "Multi-vane expander performance: Breathing characteristics," Applied Energy, Elsevier, vol. 19(4), pages 241-271.
    11. Badr, O. & Probert, S. D. & O'Callaghan, P., 1985. "Multi-vane expanders: Vane dynamics and friction losses," Applied Energy, Elsevier, vol. 20(4), pages 253-285.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Piotr Kolasiński, 2019. "Application of the Multi-Vane Expanders in ORC Systems—A Review on the Experimental and Modeling Research Activities," Energies, MDPI, vol. 12(15), pages 1-26, August.
    2. Imran, Muhammad & Usman, Muhammad & Park, Byung-Sik & Lee, Dong-Hyun, 2016. "Volumetric expanders for low grade heat and waste heat recovery applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 1090-1109.
    3. Vodicka, Vaclav & Novotny, Vaclav & Zeleny, Zbynek & Mascuch, Jakub & Kolovratnik, Michal, 2019. "Theoretical and experimental investigations on the radial and axial leakages within a rotary vane expander," Energy, Elsevier, vol. 189(C).
    4. Dawo, Fabian & Eyerer, Sebastian & Pili, Roberto & Wieland, Christoph & Spliethoff, Hartmut, 2021. "Experimental investigation, model validation and application of twin-screw expanders with different built-in volume ratios," Applied Energy, Elsevier, vol. 282(PA).
    5. Fatigati, Fabio & Di Bartolomeo, Marco & Cipollone, Roberto, 2020. "On the effects of leakages in Sliding Rotary Vane Expanders," Energy, Elsevier, vol. 192(C).
    6. Lorenzo Tocci & Tamas Pal & Ioannis Pesmazoglou & Benjamin Franchetti, 2017. "Small Scale Organic Rankine Cycle (ORC): A Techno-Economic Review," Energies, MDPI, vol. 10(4), pages 1-26, March.
    7. Pantano, Fabio & Capata, Roberto, 2017. "Expander selection for an on board ORC energy recovery system," Energy, Elsevier, vol. 141(C), pages 1084-1096.
    8. Fabio Fatigati & Marco Di Bartolomeo & Davide Di Battista & Roberto Cipollone, 2020. "Experimental Validation of a New Modeling for the Design Optimization of a Sliding Vane Rotary Expander Operating in an ORC-Based Power Unit," Energies, MDPI, vol. 13(16), pages 1-23, August.
    9. Sindhu Preetham Burugupally & Leland Weiss, 2018. "Power Generation via Small Length Scale Thermo-Mechanical Systems: Current Status and Challenges, a Review," Energies, MDPI, vol. 11(9), pages 1-22, August.
    10. Piotr Kolasiński, 2020. "The Method of the Working Fluid Selection for Organic Rankine Cycle (ORC) Systems Employing Volumetric Expanders," Energies, MDPI, vol. 13(3), pages 1-28, January.
    11. Bao, Junjiang & Zhao, Li, 2013. "A review of working fluid and expander selections for organic Rankine cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 325-342.
    12. Tchanche, Bertrand F. & Lambrinos, Gr. & Frangoudakis, A. & Papadakis, G., 2011. "Low-grade heat conversion into power using organic Rankine cycles – A review of various applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3963-3979.
    13. Fuhaid Alshammari & Apostolos Karvountzis-Kontakiotis & Apostolos Pesyridis & Muhammad Usman, 2018. "Expander Technologies for Automotive Engine Organic Rankine Cycle Applications," Energies, MDPI, vol. 11(7), pages 1-36, July.
    14. Declaye, Sébastien & Quoilin, Sylvain & Guillaume, Ludovic & Lemort, Vincent, 2013. "Experimental study on an open-drive scroll expander integrated into an ORC (Organic Rankine Cycle) system with R245fa as working fluid," Energy, Elsevier, vol. 55(C), pages 173-183.
    15. Bianchi, Giuseppe & Cipollone, Roberto, 2015. "Theoretical modeling and experimental investigations for the improvement of the mechanical efficiency in sliding vane rotary compressors," Applied Energy, Elsevier, vol. 142(C), pages 95-107.
    16. Landelle, Arnaud & Tauveron, Nicolas & Haberschill, Philippe & Revellin, Rémi & Colasson, Stéphane, 2017. "Organic Rankine cycle design and performance comparison based on experimental database," Applied Energy, Elsevier, vol. 204(C), pages 1172-1187.
    17. Wang, E.H. & Zhang, H.G. & Fan, B.Y. & Ouyang, M.G. & Zhao, Y. & Mu, Q.H., 2011. "Study of working fluid selection of organic Rankine cycle (ORC) for engine waste heat recovery," Energy, Elsevier, vol. 36(5), pages 3406-3418.
    18. Chacartegui, R. & Sánchez, D. & Muñoz, J.M. & Sánchez, T., 2009. "Alternative ORC bottoming cycles FOR combined cycle power plants," Applied Energy, Elsevier, vol. 86(10), pages 2162-2170, October.
    19. Lecompte, S. & Huisseune, H. & van den Broek, M. & De Paepe, M., 2015. "Methodical thermodynamic analysis and regression models of organic Rankine cycle architectures for waste heat recovery," Energy, Elsevier, vol. 87(C), pages 60-76.
    20. Roy, J.P. & Misra, Ashok, 2012. "Parametric optimization and performance analysis of a regenerative Organic Rankine Cycle using R-123 for waste heat recovery," Energy, Elsevier, vol. 39(1), pages 227-235.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:6:p:2794-:d:1100136. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.