IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v16y2023i13p5205-d1188264.html
   My bibliography  Save this article

Performance Evaluation and Optimization of Series Flow Channel Water-Cooled Plate for IGBT Modules

Author

Listed:
  • Liyi He

    (College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China)

  • Xue Hu

    (College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China)

  • Lixin Zhang

    (College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China
    Bingtuan Energy Development Institute, Shihezi University, Shihezi 832000, China)

  • Tongtong Xing

    (College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China)

  • Zemin Jin

    (College of Mechanical and Electrical Engineering, Shihezi University, Shihezi 832000, China)

Abstract

The stability in the operation of insulated gate bipolar transistor (IGBT) modules plays a crucial role in wind power generation. It is essential to improve the thermal performance of the heat sink of IGBT modules in wind power converters and reduce the power consumption of liquid cooling systems, in order to optimize the heat dissipation of IGBT modules in wind power converters. In this paper, a simulation model of the liquid-cooled heat sink of the IGBT module is established and the performance of three different series flow channel structures is compared by computational fluid dynamics (CFD). Moreover, based on the orthogonal test design, the three factors (channel width, channel height, and cold plate wall thickness) affecting the performance of the water-cooled plate were ranked and optimized. The results show that the water-cooled plate with double-helical-type flow channel structure has the best comprehensive performance. In addition, for the double-helical-type structure, the optimal combination of channel structure parameters about channel width, channel height, and cold plate wall thickness is obtained. After optimization, the maximum IGBT temperature, thermal resistance, and pressure drop of the cold plate are reduced by 3.13%, 5.78%, and 18.87%, respectively, compared with the double-S structure in parameter case one. The proposed methods and results are expected to provide theoretical guidance for the thermal management of IGBT modules in wind power converters.

Suggested Citation

  • Liyi He & Xue Hu & Lixin Zhang & Tongtong Xing & Zemin Jin, 2023. "Performance Evaluation and Optimization of Series Flow Channel Water-Cooled Plate for IGBT Modules," Energies, MDPI, vol. 16(13), pages 1-16, July.
    • Handle: RePEc:gam:jeners:v:16:y:2023:i:13:p:5205-:d:1188264
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/16/13/5205/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/16/13/5205/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Alptekin, Ertan, 2017. "Emission, injection and combustion characteristics of biodiesel and oxygenated fuel blends in a common rail diesel engine," Energy, Elsevier, vol. 119(C), pages 44-52.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Cornejo, A. & Barrio, I. & Campoy, M. & Lázaro, J. & Navarrete, B., 2017. "Oxygenated fuel additives from glycerol valorization. Main production pathways and effects on fuel properties and engine performance: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1400-1413.
    2. Erdoğan, Sinan & Balki, Mustafa Kemal & Aydın, Selman & Sayın, Cenk, 2020. "Performance, emission and combustion characteristic assessment of biodiesels derived from beef bone marrow in a diesel generator," Energy, Elsevier, vol. 207(C).
    3. Chao Jin & Xiaodan Li & Teng Xu & Juntong Dong & Zhenlong Geng & Jia Liu & Chenyun Ding & Jingjing Hu & Ahmed El ALAOUI & Qing Zhao & Haifeng Liu, 2023. "Zero-Carbon and Carbon-Neutral Fuels: A Review of Combustion Products and Cytotoxicity," Energies, MDPI, vol. 16(18), pages 1-29, September.
    4. Shen, Shiquan & Sun, Kai & Che, Zhizhao & Wang, Tianyou & Jia, Ming & Cai, Junqian, 2020. "Mechanism of micro-explosion of water-in-oil emulsified fuel droplet and its effect on soot generation," Energy, Elsevier, vol. 191(C).
    5. Wei, L. & Cheung, C.S. & Ning, Z., 2018. "Effects of biodiesel-ethanol and biodiesel-butanol blends on the combustion, performance and emissions of a diesel engine," Energy, Elsevier, vol. 155(C), pages 957-970.
    6. Zhang, Yunhua & Lou, Diming & Tan, Piqiang & Hu, Zhiyuan, 2018. "Experimental study on the durability of biodiesel-powered engine equipped with a diesel oxidation catalyst and a selective catalytic reduction system," Energy, Elsevier, vol. 159(C), pages 1024-1034.
    7. Patel, Alok & Arora, Neha & Mehtani, Juhi & Pruthi, Vikas & Pruthi, Parul A., 2017. "Assessment of fuel properties on the basis of fatty acid profiles of oleaginous yeast for potential biodiesel production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 604-616.
    8. Rafael Estevez & Laura Aguado-Deblas & Diego Luna & Felipa M. Bautista, 2019. "An Overview of the Production of Oxygenated Fuel Additives by Glycerol Etherification, Either with Isobutene or tert -Butyl Alcohol, over Heterogeneous Catalysts," Energies, MDPI, vol. 12(12), pages 1-20, June.
    9. Žvar Baškovič, Urban & Vihar, Rok & Seljak, Tine & Katrašnik, Tomaž, 2017. "Feasibility analysis of 100% tire pyrolysis oil in a common rail Diesel engine," Energy, Elsevier, vol. 137(C), pages 980-990.
    10. Hoseini, S.S. & Najafi, G. & Ghobadian, B. & Rahimi, A. & Yusaf, Talal & Mamat, Rizalman & Sidik, N.A.C. & Azmi, W.H., 2017. "Effects of biodiesel fuel obtained from Salvia macrosiphon oil (ultrasonic-assisted) on performance and emissions of diesel engine," Energy, Elsevier, vol. 131(C), pages 289-296.
    11. Dong Lin Loo & Yew Heng Teoh & Heoy Geok How & Jun Sheng Teh & Liviu Catalin Andrei & Slađana Starčević & Farooq Sher, 2021. "Applications Characteristics of Different Biodiesel Blends in Modern Vehicles Engines: A Review," Sustainability, MDPI, vol. 13(17), pages 1-31, August.
    12. Feng, Renhua & Li, Guanghua & Sun, Zhengwei & Hu, Xiulin & Deng, Banglin & Fu, Jianqin, 2023. "Potential of emission reduction of a turbo-charged non-road diesel engine without aftertreatment under multiple operating scenarios," Energy, Elsevier, vol. 263(PB).
    13. Mohammad I. Jahirul & Farhad M. Hossain & Mohammad G. Rasul & Ashfaque Ahmed Chowdhury, 2021. "A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application," Energies, MDPI, vol. 14(13), pages 1-18, June.
    14. Guirong Wu & Jun Cong Ge & Nag Jung Choi, 2021. "Effect of Ethanol Additives on Combustion and Emissions of a Diesel Engine Fueled by Palm Oil Biodiesel at Idling Speed," Energies, MDPI, vol. 14(5), pages 1-12, March.
    15. Kumar, Shiva & Dinesha, P. & Bran, Ijas, 2017. "Influence of nanoparticles on the performance and emission characteristics of a biodiesel fuelled engine: An experimental analysis," Energy, Elsevier, vol. 140(P1), pages 98-105.
    16. Hammerton, James M. & Li, Hu & Ross, Andrew B., 2020. "Char-diesel slurry fuels for microgeneration: Emission characteristics and engine performance," Energy, Elsevier, vol. 207(C).
    17. Jiabin Duan & Jiapei Zhao & Xinke Li & Satyam Panchal & Jinliang Yuan & Roydon Fraser & Michael Fowler, 2021. "Modeling and Analysis of Heat Dissipation for Liquid Cooling Lithium-Ion Batteries," Energies, MDPI, vol. 14(14), pages 1-19, July.
    18. Sedghi, Reza & Shahbeik, Hossein & Rastegari, Hajar & Rafiee, Shahin & Peng, Wanxi & Nizami, Abdul-Sattar & Gupta, Vijai Kumar & Chen, Wei-Hsin & Lam, Su Shiung & Pan, Junting & Tabatabaei, Meisam & A, 2022. "Turning biodiesel glycerol into oxygenated fuel additives and their effects on the behavior of internal combustion engines: A comprehensive systematic review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    19. Łukasz Muślewski & Marietta Markiewicz & Michał Pająk & Tomasz Kałaczyński & Davor Kolar, 2021. "Analysis of the Use of Fatty Acid Methyl Esters as an Additive to Diesel Fuel for Internal Combustion Engines," Energies, MDPI, vol. 14(21), pages 1-17, October.
    20. M. Mukhtar N. A. & Abd Rashid Abd Aziz & Ftwi Y. Hagos & M. M. Noor & Kumaran Kadirgama & Rizalman Mamat & A. Adam Abdullah, 2019. "The Influence of Formulation Ratio and Emulsifying Settings on Tri-Fuel (Diesel–Ethanol–Biodiesel) Emulsion Properties," Energies, MDPI, vol. 12(9), pages 1-24, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:16:y:2023:i:13:p:5205-:d:1188264. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.