IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i24p9584-d1006368.html
   My bibliography  Save this article

The Influence of Various Solar Radiations on the Efficiency of a Photovoltaic Solar Module Integrated with a Passive Cooling System

Author

Listed:
  • Saeed Rubaiee

    (Department of Mechanical and Materials Engineering, University of Jeddah, P.O. Box 80327, Jeddah 21589, Saudi Arabia)

  • M. A. Fazal

    (Department of Mechanical and Materials Engineering, University of Jeddah, P.O. Box 80327, Jeddah 21589, Saudi Arabia)

Abstract

The thermal regulation of a silicon photovoltaic (PV) solar system is essential as the module surface temperature beyond 25 °C deteriorates its Power Conversion Efficiency (PCE). The intensity of solar radiation seems to have a crucial impact on the PCE of a PV solar system. The present study aims to assess the effect of solar radiation variations on the PCEs of PV modules integrated with and without passive cooling systems. The used passive cooling systems are (a) multi-pipe copper frame filled with Phase Change Material (PCM) and (b) multi-pipe copper frame filled with ZnO-doped PCM. The tests were conducted at the University of Jeddah in the month of March at various local times. The results show that the ambient and module surface temperatures are directly dominated by solar radiations. The conventional PV solar system presents a higher module surface temperature as compared to that of a PV system integrated with ZnO/PCM. The enhanced module surface temperature decreases the open circuit voltage ( V oc ) and slightly increases the short circuit current ( I sc ) indicating its reduced electric efficiency.

Suggested Citation

  • Saeed Rubaiee & M. A. Fazal, 2022. "The Influence of Various Solar Radiations on the Efficiency of a Photovoltaic Solar Module Integrated with a Passive Cooling System," Energies, MDPI, vol. 15(24), pages 1-9, December.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:24:p:9584-:d:1006368
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/24/9584/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/24/9584/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Stropnik, Rok & Stritih, Uroš, 2016. "Increasing the efficiency of PV panel with the use of PCM," Renewable Energy, Elsevier, vol. 97(C), pages 671-679.
    2. Hachem, Farouk & Abdulhay, Bakri & Ramadan, Mohamad & El Hage, Hicham & El Rab, Mostafa Gad & Khaled, Mahmoud, 2017. "Improving the performance of photovoltaic cells using pure and combined phase change materials – Experiments and transient energy balance," Renewable Energy, Elsevier, vol. 107(C), pages 567-575.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Zhenpeng & Ma, Tao & Zhao, Jiaxin & Song, Aotian & Cheng, Yuanda, 2019. "Experimental study and performance analysis on solar photovoltaic panel integrated with phase change material," Energy, Elsevier, vol. 178(C), pages 471-486.
    2. Gan, Guohui & Xiang, Yetao, 2020. "Experimental investigation of a photovoltaic thermal collector with energy storage for power generation, building heating and natural ventilation," Renewable Energy, Elsevier, vol. 150(C), pages 12-22.
    3. Shamberger, Patrick J. & Bruno, Nickolaus M., 2020. "Review of metallic phase change materials for high heat flux transient thermal management applications," Applied Energy, Elsevier, vol. 258(C).
    4. Yıldız, Çağatay & Arıcı, Müslüm & Nižetić, Sandro & Shahsavar, Amin, 2020. "Numerical investigation of natural convection behavior of molten PCM in an enclosure having rectangular and tree-like branching fins," Energy, Elsevier, vol. 207(C).
    5. Karthikeyan Velmurugan & Rajvikram Madurai Elavarasan & Pham Van De & Vaithinathan Karthikeyan & Tulja Bhavani Korukonda & Joshuva Arockia Dhanraj & Kanchanok Emsaeng & Md. Shahariar Chowdhury & Kuaan, 2022. "A Review of Heat Batteries Based PV Module Cooling—Case Studies on Performance Enhancement of Large-Scale Solar PV System," Sustainability, MDPI, vol. 14(4), pages 1-65, February.
    6. Lv, Song & Yang, Jiahao & Ren, Juwen & Zhang, Bolong & Lai, Yin & Chang, Zhihao, 2023. "Research and numerical analysis on performance optimization of photovoltaic-thermoelectric system incorporated with phase change materials," Energy, Elsevier, vol. 263(PC).
    7. Vittorini, Diego & Cipollone, Roberto, 2019. "Fin-cooled photovoltaic module modeling – Performances mapping and electric efficiency assessment under real operating conditions," Energy, Elsevier, vol. 167(C), pages 159-167.
    8. Sudhakar, P. & Santosh, R. & Asthalakshmi, B. & Kumaresan, G. & Velraj, R., 2021. "Performance augmentation of solar photovoltaic panel through PCM integrated natural water circulation cooling technique," Renewable Energy, Elsevier, vol. 172(C), pages 1433-1448.
    9. Rajvikram Madurai Elavarasan & Karthikeyan Velmurugan & Umashankar Subramaniam & A Rakesh Kumar & Dhafer Almakhles, 2020. "Experimental Investigations Conducted for the Characteristic Study of OM29 Phase Change Material and Its Incorporation in Photovoltaic Panel," Energies, MDPI, vol. 13(4), pages 1-18, February.
    10. Abdulmunem, Abdulmunem R. & Samin, Pakharuddin Mohd & Rahman, Hasimah Abdul & Hussien, Hashim A. & Mazali, Izhari Izmi, 2020. "Enhancing PV Cell’s electrical efficiency using phase change material with copper foam matrix and multi-walled carbon nanotubes as passive cooling method," Renewable Energy, Elsevier, vol. 160(C), pages 663-675.
    11. Tarek Ibrahim & Mohamad Abou Akrouch & Farouk Hachem & Mohamad Ramadan & Haitham S. Ramadan & Mahmoud Khaled, 2024. "Cooling Techniques for Enhanced Efficiency of Photovoltaic Panels—Comparative Analysis with Environmental and Economic Insights," Energies, MDPI, vol. 17(3), pages 1-32, February.
    12. Emam, Mohamed & Ookawara, Shinichi & Ahmed, Mahmoud, 2019. "Thermal management of electronic devices and concentrator photovoltaic systems using phase change material heat sinks: Experimental investigations," Renewable Energy, Elsevier, vol. 141(C), pages 322-339.
    13. Abdalqader Ahmad & Helena Navarro & Saikat Ghosh & Yulong Ding & Jatindra Nath Roy, 2021. "Evaluation of New PCM/PV Configurations for Electrical Energy Efficiency Improvement through Thermal Management of PV Systems," Energies, MDPI, vol. 14(14), pages 1-18, July.
    14. Ramadan, Mohamad & Murr, Rabih & Khaled, Mahmoud & Olabi, Abdul Ghani, 2018. "Mixed numerical - Experimental approach to enhance the heat pump performance by drain water heat recovery," Energy, Elsevier, vol. 149(C), pages 1010-1021.
    15. Amirifard, Masoumeh & Kasaeian, Alibakhsh & Amidpour, Majid, 2018. "Integration of a solar pond with a latent heat storage system," Renewable Energy, Elsevier, vol. 125(C), pages 682-693.
    16. Rolka, Paulina & Przybylinski, Tomasz & Kwidzinski, Roman & Lackowski, Marcin, 2021. "The heat capacity of low-temperature phase change materials (PCM) applied in thermal energy storage systems," Renewable Energy, Elsevier, vol. 172(C), pages 541-550.
    17. Maleki, Yaser & Pourfayaz, Fathollah & Mehrpooya, Mehdi, 2022. "Experimental study of a novel hybrid photovoltaic/thermal and thermoelectric generators system with dual phase change materials," Renewable Energy, Elsevier, vol. 201(P2), pages 202-215.
    18. Hamed, Tareq Abu & Alshare, Aiman & El-Khalil, Hossam, 2019. "Passive cooling of building-integrated photovolatics in desert conditions: Experiment and modeling," Energy, Elsevier, vol. 170(C), pages 131-138.
    19. Khordehgah, Navid & Guichet, Valentin & Lester, Stephen P. & Jouhara, Hussam, 2019. "Computational study and experimental validation of a solar photovoltaics and thermal technology," Renewable Energy, Elsevier, vol. 143(C), pages 1348-1356.
    20. Mohammad K. Najjar & Eduardo Linhares Qualharini & Ahmed W. A. Hammad & Dieter Boer & Assed Haddad, 2019. "Framework for a Systematic Parametric Analysis to Maximize Energy Output of PV Modules Using an Experimental Design," Sustainability, MDPI, vol. 11(10), pages 1-24, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:24:p:9584-:d:1006368. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.