IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i13p4544-d844484.html
   My bibliography  Save this article

Key Challenges for High Temperature Thermal Energy Storage in Concrete—First Steps towards a Novel Storage Design

Author

Listed:
  • Luisa F. Cabeza

    (GREiA Research Group, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida, Spain)

  • David Vérez

    (GREiA Research Group, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida, Spain)

  • Gabriel Zsembinszki

    (GREiA Research Group, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida, Spain)

  • Emiliano Borri

    (GREiA Research Group, Universitat de Lleida, Pere de Cabrera s/n, 25001 Lleida, Spain)

  • Cristina Prieto

    (Department of Energy Engineering, University of Seville, Camino de Los Descubrimientos s/n, 41092 Seville, Spain)

Abstract

Thermal energy storage (TES) allows the existing mismatch between supply and demand in energy systems to be overcome. Considering temperatures above 150 °C, there are major potential benefits for applications, such as process heat and electricity production, where TES coupled with concentrating solar power (CSP) plants can increase the penetration of renewable energies. To this end, this paper performs a critical analysis of the literature on the current and most promising concrete energy storage technologies, identifying five challenges that must be overcome for the successful exploitation of this technology. With these five challenges in mind, this paper proposes an approach that uses a new modular design of concrete-based TES. A preliminary study of the feasibility of the proposed system was performed using computational fluid dynamics (CFD) techniques, showing promising results.

Suggested Citation

  • Luisa F. Cabeza & David Vérez & Gabriel Zsembinszki & Emiliano Borri & Cristina Prieto, 2022. "Key Challenges for High Temperature Thermal Energy Storage in Concrete—First Steps towards a Novel Storage Design," Energies, MDPI, vol. 15(13), pages 1-12, June.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:13:p:4544-:d:844484
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/13/4544/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/13/4544/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ktistis, Panayiotis K. & Agathokleous, Rafaela A. & Kalogirou, Soteris A., 2021. "Experimental performance of a parabolic trough collector system for an industrial process heat application," Energy, Elsevier, vol. 215(PA).
    2. Mohammad Rahjoo & Guido Goracci & Pavel Martauz & Esther Rojas & Jorge S. Dolado, 2022. "Geopolymer Concrete Performance Study for High-Temperature Thermal Energy Storage (TES) Applications," Sustainability, MDPI, vol. 14(3), pages 1-19, February.
    3. Cristina Prieto & David Pérez Osorio & Edouard Gonzalez-Roubaud & Sonia Fereres & Luisa F. Cabeza, 2021. "Advanced Concrete Steam Accumulation Tanks for Energy Storage for Solar Thermal Electricity," Energies, MDPI, vol. 14(13), pages 1-26, June.
    4. Fernández, Angel G. & Gomez-Vidal, Judith & Oró, Eduard & Kruizenga, Alan & Solé, Aran & Cabeza, Luisa F., 2019. "Mainstreaming commercial CSP systems: A technology review," Renewable Energy, Elsevier, vol. 140(C), pages 152-176.
    5. Vignarooban, K. & Xu, Xinhai & Arvay, A. & Hsu, K. & Kannan, A.M., 2015. "Heat transfer fluids for concentrating solar power systems – A review," Applied Energy, Elsevier, vol. 146(C), pages 383-396.
    6. Muhammad Khurram Khan, 2020. "Technological advancements and 2020," Telecommunication Systems: Modelling, Analysis, Design and Management, Springer, vol. 73(1), pages 1-2, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jacek Kasperski & Anna Bać & Oluwafunmilola Oladipo, 2023. "A Simulation of a Sustainable Plus-Energy House in Poland Equipped with a Photovoltaic Powered Seasonal Thermal Storage System," Sustainability, MDPI, vol. 15(4), pages 1-19, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Adrián Caraballo & Santos Galán-Casado & Ángel Caballero & Sara Serena, 2021. "Molten Salts for Sensible Thermal Energy Storage: A Review and an Energy Performance Analysis," Energies, MDPI, vol. 14(4), pages 1-15, February.
    2. Bravo, Ruben & Ortiz, Carlos & Chacartegui, Ricardo & Friedrich, Daniel, 2021. "Multi-objective optimisation and guidelines for the design of dispatchable hybrid solar power plants with thermochemical energy storage," Applied Energy, Elsevier, vol. 282(PB).
    3. Tiwari, Vivek & Rai, Aakash C. & Srinivasan, P., 2021. "Parametric analysis and optimization of a latent heat thermal energy storage system for concentrated solar power plants under realistic operating conditions," Renewable Energy, Elsevier, vol. 174(C), pages 305-319.
    4. Nieto-Maestre, Javier & Muñoz-Sánchez, Belén & Fernández, Angel G. & Faik, Abdessamad & Grosu, Yaroslav & García-Romero, Ana, 2020. "Compatibility of container materials for Concentrated Solar Power with a solar salt and alumina based nanofluid: A study under dynamic conditions," Renewable Energy, Elsevier, vol. 146(C), pages 384-396.
    5. Soares, João & Oliveira, Armando C. & Valenzuela, Loreto, 2021. "A dynamic model for once-through direct steam generation in linear focus solar collectors," Renewable Energy, Elsevier, vol. 163(C), pages 246-261.
    6. Na Li & Yang Wang & Qi Liu & Hao Peng, 2022. "Evaluation of Thermal-Physical Properties of Novel Multicomponent Molten Nitrate Salts for Heat Transfer and Storage," Energies, MDPI, vol. 15(18), pages 1-17, September.
    7. Zhang, Shengchun & Wang, Zhifeng & Wu, Zhiyong & Bai, Fengwu & Huang, Pingrui, 2019. "Numerical investigation of the heat transport in a very loose packed granular bed air receiver with a non-uniform energy flux distribution," Renewable Energy, Elsevier, vol. 138(C), pages 987-998.
    8. Sadeghi, Shayan & Ghandehariun, Samane, 2022. "A standalone solar thermochemical water splitting hydrogen plant with high-temperature molten salt: Thermodynamic and economic analyses and multi-objective optimization," Energy, Elsevier, vol. 240(C).
    9. Zhao, Yawen & Hong, Hui & Jin, Hongguang, 2017. "Optimization of the solar field size for the solar–coal hybrid system," Applied Energy, Elsevier, vol. 185(P2), pages 1162-1172.
    10. Merad, Faycel & Labar, Hocine & Samira KELAIAIA, Mounia & Necaibia, Salah & Djelailia, Okba, 2019. "A maximum power control based on flexible collector applied to concentrator solar power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 315-331.
    11. Yang, S. & Sensoy, T.S. & Ordonez, J.C., 2018. "Dynamic 3D volume element model of a parabolic trough solar collector for simulation and optimization," Applied Energy, Elsevier, vol. 217(C), pages 509-526.
    12. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    13. Saranprabhu, M.K. & Rajan, K.S., 2019. "Magnesium oxide nanoparticles dispersed solar salt with improved solid phase thermal conductivity and specific heat for latent heat thermal energy storage," Renewable Energy, Elsevier, vol. 141(C), pages 451-459.
    14. Peiró, Gerard & Prieto, Cristina & Gasia, Jaume & Jové, Aleix & Miró, Laia & Cabeza, Luisa F., 2018. "Two-tank molten salts thermal energy storage system for solar power plants at pilot plant scale: Lessons learnt and recommendations for its design, start-up and operation," Renewable Energy, Elsevier, vol. 121(C), pages 236-248.
    15. Mena, R. & Escobar, R. & Lorca, Á. & Negrete-Pincetic, M. & Olivares, D., 2019. "The impact of concentrated solar power in electric power systems: A Chilean case study," Applied Energy, Elsevier, vol. 235(C), pages 258-283.
    16. Sau, S. & Corsaro, N. & Crescenzi, T. & D’Ottavi, C. & Liberatore, R. & Licoccia, S. & Russo, V. & Tarquini, P. & Tizzoni, A.C., 2016. "Techno-economic comparison between CSP plants presenting two different heat transfer fluids," Applied Energy, Elsevier, vol. 168(C), pages 96-109.
    17. Du, Lichan & Ding, Jing & Tian, Heqing & Wang, Weilong & Wei, Xiaolan & Song, Ming, 2017. "Thermal properties and thermal stability of the ternary eutectic salt NaCl-CaCl2-MgCl2 used in high-temperature thermal energy storage process," Applied Energy, Elsevier, vol. 204(C), pages 1225-1230.
    18. Sainz-Mañas, Miguel & Bataille, Françoise & Caliot, Cyril & Vossier, Alexis & Flamant, Gilles, 2022. "Direct absorption nanofluid-based solar collectors for low and medium temperatures. A review," Energy, Elsevier, vol. 260(C).
    19. Khalil Anwar, M. & Yilbas, B.S. & Shuja, S.Z., 2016. "A thermal battery mimicking a concentrated volumetric solar receiver," Applied Energy, Elsevier, vol. 175(C), pages 16-30.
    20. Haiting Liu & Jiewen Deng & Yue Guan & Liwei Wang, 2022. "Study of Heat Flux Density of Dish Solar Cavity Heat Absorber," Energies, MDPI, vol. 15(21), pages 1-12, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:13:p:4544-:d:844484. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.