IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v215y2021ipas0360544220323951.html
   My bibliography  Save this article

Experimental performance of a parabolic trough collector system for an industrial process heat application

Author

Listed:
  • Ktistis, Panayiotis K.
  • Agathokleous, Rafaela A.
  • Kalogirou, Soteris A.

Abstract

Manufacturing is responsible for 60% of the fuel consumption in Cyprus and the industrial sector is the second biggest fuel consumer, mainly for steam production. Thus, the use of parabolic trough collector (PTC) systems for the production of steam or hot water can be a promising solution for the industrial sector. This study presents the first industrial PTC system in Cyprus, installed at the biggest soft drinks factory. The system consists of 288 m2 of PTC, a steam generator and concrete thermal energy storage (CTES) in order to keep the system dispatchable. To achieve that, two operation strategies are developed which are controlled automatically by the main processor of the system. The first strategy is enabled when there is a steam demand and the second when the energy can be stored directly to the CTES. Both strategies are tested, and it is shown that under Strategy 1 the PTC system can produce 940 litters of steam per day, and under Strategy 2 it can store 107.3 kWhth. In two months period tests, it is proved that it can supply the required amount of steam to the factory even when solar radiation is low, with the support from the CTES.

Suggested Citation

  • Ktistis, Panayiotis K. & Agathokleous, Rafaela A. & Kalogirou, Soteris A., 2021. "Experimental performance of a parabolic trough collector system for an industrial process heat application," Energy, Elsevier, vol. 215(PA).
    • Handle: RePEc:eee:energy:v:215:y:2021:i:pa:s0360544220323951
    DOI: 10.1016/j.energy.2020.119288
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220323951
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119288?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kumaresan, Govindaraj & Sridhar, Rahulram & Velraj, Ramalingom, 2012. "Performance studies of a solar parabolic trough collector with a thermal energy storage system," Energy, Elsevier, vol. 47(1), pages 395-402.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sainz-Mañas, Miguel & Bataille, Françoise & Caliot, Cyril & Vossier, Alexis & Flamant, Gilles, 2022. "Direct absorption nanofluid-based solar collectors for low and medium temperatures. A review," Energy, Elsevier, vol. 260(C).
    2. Luisa F. Cabeza & David Vérez & Gabriel Zsembinszki & Emiliano Borri & Cristina Prieto, 2022. "Key Challenges for High Temperature Thermal Energy Storage in Concrete—First Steps towards a Novel Storage Design," Energies, MDPI, vol. 15(13), pages 1-12, June.
    3. Khouya, Ahmed, 2022. "Performance analysis and optimization of a trilateral organic Rankine powered by a concentrated photovoltaic thermal system," Energy, Elsevier, vol. 247(C).
    4. Junaid Ahmed & Laveet Kumar & Abdul Fatah Abbasi & Mamdouh El Haj Assad, 2022. "Energy, Exergy, Environmental and Economic Analysis (4e) of a Solar Thermal System for Process Heating in Jamshoro, Pakistan," Energies, MDPI, vol. 15(22), pages 1-18, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Jorge M. Llamas & David Bullejos & Manuel Ruiz de Adana, 2019. "Optimization of 100 MW e Parabolic-Trough Solar-Thermal Power Plants Under Regulated and Deregulated Electricity Market Conditions," Energies, MDPI, vol. 12(20), pages 1-23, October.
    2. Kumaresan, G. & Sudhakar, P. & Santosh, R. & Velraj, R., 2017. "Experimental and numerical studies of thermal performance enhancement in the receiver part of solar parabolic trough collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 1363-1374.
    3. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    4. Amit K. Bhakta & Nitesh K. Panday & Shailendra N. Singh, 2018. "Performance Study of a Cylindrical Parabolic Concentrating Solar Water Heater with Nail Type Twisted Tape Inserts in the Copper Absorber Tube," Energies, MDPI, vol. 11(1), pages 1-15, January.
    5. Reddy, K.S. & Ananthsornaraj, C., 2020. "Design, development and performance investigation of solar Parabolic Trough Collector for large-scale solar power plants," Renewable Energy, Elsevier, vol. 146(C), pages 1943-1957.
    6. Singh, Rajinesh & Rowlands, Andrew S. & Miller, Sarah A., 2013. "Effects of relative volume-ratios on dynamic performance of a direct-heated supercritical carbon-dioxide closed Brayton cycle in a solar-thermal power plant," Energy, Elsevier, vol. 55(C), pages 1025-1032.
    7. Natividade, Pablo Sampaio Gomes & de Moraes Moura, Gabriel & Avallone, Elson & Bandarra Filho, Enio Pedone & Gelamo, Rogério Valentim & Gonçalves, Júlio Cesar de Souza Inácio, 2019. "Experimental analysis applied to an evacuated tube solar collector equipped with parabolic concentrator using multilayer graphene-based nanofluids," Renewable Energy, Elsevier, vol. 138(C), pages 152-160.
    8. Singh, G.K., 2013. "Solar power generation by PV (photovoltaic) technology: A review," Energy, Elsevier, vol. 53(C), pages 1-13.
    9. López-González, D. & Valverde, J.L. & Sánchez, P. & Sanchez-Silva, L., 2013. "Characterization of different heat transfer fluids and degradation study by using a pilot plant device operating at real conditions," Energy, Elsevier, vol. 54(C), pages 240-250.
    10. Selvaraj Balachandran & Jose Swaminathan, 2022. "Advances in Indoor Cooking Using Solar Energy with Phase Change Material Storage Systems," Energies, MDPI, vol. 15(22), pages 1-32, November.
    11. Praveen R. P. & Mohammad Abdul Baseer & Ahmed Bilal Awan & Muhammad Zubair, 2018. "Performance Analysis and Optimization of a Parabolic Trough Solar Power Plant in the Middle East Region," Energies, MDPI, vol. 11(4), pages 1-18, March.
    12. Bijarniya, Jay Prakash & Sudhakar, K. & Baredar, Prashant, 2016. "Concentrated solar power technology in India: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 63(C), pages 593-603.
    13. Azzouzi, Djelloul & Bourorga, Houssam eddine & Belainine, Khathir abdelrahim & Boumeddane, Boussad, 2018. "Experimental study of a designed solar parabolic trough with large rim angle," Renewable Energy, Elsevier, vol. 125(C), pages 495-500.
    14. Boukelia, T.E. & Mecibah, M.S. & Kumar, B.N. & Reddy, K.S., 2015. "Investigation of solar parabolic trough power plants with and without integrated TES (thermal energy storage) and FBS (fuel backup system) using thermic oil and solar salt," Energy, Elsevier, vol. 88(C), pages 292-303.
    15. Kumaresan, G. & Santosh, R. & Raju, G. & Velraj, R., 2018. "Experimental and numerical investigation of solar flat plate cooking unit for domestic applications," Energy, Elsevier, vol. 157(C), pages 436-447.
    16. Harvinder Singh & Gagandeep & Karamjeet Saini & Avadhesh Yadav, 2015. "Experimental comparison of different heat transfer fluid for thermal performance of a solar cooker based on evacuated tube collector," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 17(3), pages 497-511, June.
    17. Salgado Conrado, L. & Rodriguez-Pulido, A. & Calderón, G., 2017. "Thermal performance of parabolic trough solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 1345-1359.
    18. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional cooking with solar energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 131-154.
    19. Quijera, José Antonio & García, Araceli & Alriols, María González & Labidi, Jalel, 2013. "Heat integration options based on pinch and exergy analyses of a thermosolar and heat pump in a fish tinning industrial process," Energy, Elsevier, vol. 55(C), pages 23-37.
    20. Wang, Qiliang & Li, Jing & Yang, Honglun & Su, Katy & Hu, Mingke & Pei, Gang, 2017. "Performance analysis on a high-temperature solar evacuated receiver with an inner radiation shield," Energy, Elsevier, vol. 139(C), pages 447-458.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:215:y:2021:i:pa:s0360544220323951. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.