IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i22p7769-d683262.html
   My bibliography  Save this article

Thermodynamic and Transport Properties of Biomass-Derived Furfural, Furfuryl Alcohol and Their Mixtures

Author

Listed:
  • Zoran V. Simić

    (Innovation Center of the Faculty of Technology and Metallurgy, University of Belgrade, 11120 Belgrade, Serbia)

  • Mirjana Lj. Kijevčanin

    (Faculty of Technology and Metallurgy, University of Belgrade, 11120 Belgrade, Serbia)

  • Ivona R. Radović

    (Faculty of Technology and Metallurgy, University of Belgrade, 11120 Belgrade, Serbia)

  • Miha Grilc

    (Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, 1000 Ljubljana, Slovenia)

  • Gorica R. Ivaniš

    (Faculty of Technology and Metallurgy, University of Belgrade, 11120 Belgrade, Serbia
    Department of Catalysis and Chemical Reaction Engineering, National Institute of Chemistry, 1000 Ljubljana, Slovenia)

Abstract

The limited reserves and well-known disadvantages of using fossil energy sources have increased the need for appropriate renewable substitutes in the production of various chemicals and materials. Biomass has been shown to be worthy of attention since it can be converted to biofuels and value-added chemicals relatively easily. The design of biomass valorisation process requires knowledge on the thermodynamic behaviour of the biomass-derived compounds, such as furfural and furfuryl alcohol. The thermodynamic and transport properties of the binary system furfural + furfuryl alcohol were studied at various temperatures and pressures. Density, speed of sound and refractive index were measured in the temperature range T = (288.15–345.15) K and viscosity was measured at temperatures up to 373.15 K, all at atmospheric pressure. Further, the density of pure components was obtained in the temperature range (293.15–413.15) K for furfural and (293.15–373.15) K for furfuryl alcohol at pressures up to 60.0 MPa. The obtained density values were correlated using the modified Tammann–Tait equation with an average absolute deviation lower than 0.009% for furfural and furfuryl alcohol. The optimised parameters were used for the calculation of the isothermal compressibility, the isobaric thermal expansivity, the internal pressure and the isobaric and isochoric specific heat capacities. The reported data are a valuable source of information for the further application of the investigated compounds.

Suggested Citation

  • Zoran V. Simić & Mirjana Lj. Kijevčanin & Ivona R. Radović & Miha Grilc & Gorica R. Ivaniš, 2021. "Thermodynamic and Transport Properties of Biomass-Derived Furfural, Furfuryl Alcohol and Their Mixtures," Energies, MDPI, vol. 14(22), pages 1-18, November.
  • Handle: RePEc:gam:jeners:v:14:y:2021:i:22:p:7769-:d:683262
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/22/7769/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/14/22/7769/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Yan, Kai & Wu, Guosheng & Lafleur, Todd & Jarvis, Cody, 2014. "Production, properties and catalytic hydrogenation of furfural to fuel additives and value-added chemicals," Renewable and Sustainable Energy Reviews, Elsevier, vol. 38(C), pages 663-676.
    2. Zhao, Yuan & Lu, Kaifeng & Xu, Hao & Zhu, Lingjun & Wang, Shurong, 2021. "A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mahmoud G. Hemeida & Ashraf M. Hemeida & Tomonobu Senjyu & Dina Osheba, 2022. "Renewable Energy Resources Technologies and Life Cycle Assessment: Review," Energies, MDPI, vol. 15(24), pages 1-36, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Cornejo, A. & Barrio, I. & Campoy, M. & Lázaro, J. & Navarrete, B., 2017. "Oxygenated fuel additives from glycerol valorization. Main production pathways and effects on fuel properties and engine performance: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 1400-1413.
    2. Tuan Hoang, Anh & Viet Pham, Van, 2021. "2-Methylfuran (MF) as a potential biofuel: A thorough review on the production pathway from biomass, combustion progress, and application in engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    3. Wiranarongkorn, Kunlanan & Im-orb, Karittha & Panpranot, Joongjai & Maréchal, François & Arpornwichanop, Amornchai, 2021. "Exergy and exergoeconomic analyses of sustainable furfural production via reactive distillation," Energy, Elsevier, vol. 226(C).
    4. Hu, Di & Zhang, Man & Xu, Hong & Wang, Yuchen & Yan, Kai, 2021. "Recent advance on the catalytic system for efficient production of biomass-derived 5-hydroxymethylfurfural," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    5. Mazen A. Eldeeb & Benjamin Akih-Kumgeh, 2018. "Recent Trends in the Production, Combustion and Modeling of Furan-Based Fuels," Energies, MDPI, vol. 11(3), pages 1-47, February.
    6. Ocreto, Jherwin B. & Chen, Wei-Hsin & Ubando, Aristotle T. & Park, Young-Kwon & Sharma, Amit Kumar & Ashokkumar, Veeramuthu & Ok, Yong Sik & Kwon, Eilhann E. & Rollon, Analiza P. & De Luna, Mark Danie, 2021. "A critical review on second- and third-generation bioethanol production using microwaved-assisted heating (MAH) pretreatment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    7. Wiranarongkorn, K. & Im-orb, K. & Patcharavorachot, Y. & Maréchal, F. & Arpornwichanop, A., 2023. "Comparative techno-economic and energy analyses of integrated biorefinery processes of furfural and 5-hydroxymethylfurfural from biomass residue," Renewable and Sustainable Energy Reviews, Elsevier, vol. 175(C).
    8. Mofijur, M. & Rasul, M.G. & Hyde, J. & Azad, A.K. & Mamat, R. & Bhuiya, M.M.K., 2016. "Role of biofuel and their binary (diesel–biodiesel) and ternary (ethanol–biodiesel–diesel) blends on internal combustion engines emission reduction," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 265-278.
    9. He, Yifeng & Zhao, Yingnan & Chai, Meiyun & Zhou, Zhongyue & Sarker, Manobendro & Li, Chong & Liu, Ronghou & Cai, Junmeng & Liu, Xinghua, 2020. "Comparative study of fast pyrolysis, hydropyrolysis and catalytic hydropyrolysis of poplar sawdust and rice husk in a modified Py-GC/MS microreactor system: Insights into product distribution, quantum," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    10. Omid Doustdar & Soheil Zeraati-Rezaei & Jose Martin Herreros & Athanasios Tsolakis & Karl D. Dearn & Miroslaw Lech Wyszynski, 2021. "Tribological Performance of Biomass-Derived Bio-Alcohol and Bio-Ketone Fuels," Energies, MDPI, vol. 14(17), pages 1-11, August.
    11. Magdalena Modelska & Michal J. Binczarski & Piotr Dziugan & Szymon Nowak & Zdzisława Romanowska-Duda & Adam Sadowski & Izabela A. Witońska, 2020. "Potential of Waste Biomass from the Sugar Industry as a Source of Furfural and Its Derivatives for Use as Fuel Additives in Poland," Energies, MDPI, vol. 13(24), pages 1-15, December.
    12. Maity, Sunil K., 2015. "Opportunities, recent trends and challenges of integrated biorefinery: Part I," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1427-1445.
    13. Martin J. Taylor & Hassan A. Alabdrabalameer & Vasiliki Skoulou, 2019. "Choosing Physical, Physicochemical and Chemical Methods of Pre-Treating Lignocellulosic Wastes to Repurpose into Solid Fuels," Sustainability, MDPI, vol. 11(13), pages 1-27, June.
    14. Morone, Amruta & Apte, Mayura & Pandey, R.A., 2015. "Levulinic acid production from renewable waste resources: Bottlenecks, potential remedies, advancements and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 548-565.
    15. Cai, Xin & Wang, Zhichao & Ye, Yueyuan & Wang, Duo & Zhang, Zhaoxia & Zheng, Zhifeng & Liu, Yunquan & Li, Shuirong, 2021. "Conversion of chitin biomass into 5-hydroxymethylfurfural: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    16. Chen, Hao & Su, Xin & He, Jingjing & Zhang, Peng & Xu, Hongming & Zhou, Chenglong, 2021. "Investigation on combustion characteristics of cyclopentanol/diesel fuel blends in an optical engine," Renewable Energy, Elsevier, vol. 167(C), pages 811-829.
    17. Yan, Kai & Jarvis, Cody & Gu, Jing & Yan, Yong, 2015. "Production and catalytic transformation of levulinic acid: A platform for speciality chemicals and fuels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 986-997.
    18. Shao, Yuewen & Guo, Mingzhu & Fan, Mengjiao & Sun, Kai & Gao, Guoming & Li, Chao & Kontchouo, Félix Mérimé Bkangmo & Zhang, Lijun & Zhang, Shu & Hu, Xun, 2023. "Importance of oxyphilic FeNi alloy in NiFeAl catalysts for selective conversion of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran," Renewable Energy, Elsevier, vol. 208(C), pages 105-118.
    19. Li, Linghao & Zheng, Xiaoen & Zhang, Fan & Yu, Haipeng & Wang, Hong & Jia, Zhiwen & Sun, Yan & Jiang, Enchen & Xu, Xiwei, 2023. "Formamide hydrothermal pretreatment assisted camellia shell for upgrading to N-containing chemical and supercapacitor electrode preparation using the residue," Energy, Elsevier, vol. 265(C).
    20. Zhou, Ziyuan & Liu, Dehua & Zhao, Xuebing, 2021. "Conversion of lignocellulose to biofuels and chemicals via sugar platform: An updated review on chemistry and mechanisms of acid hydrolysis of lignocellulose," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:22:p:7769-:d:683262. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.