IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i15p4020-d394234.html
   My bibliography  Save this article

The “INNOVARE” Project: Innovative Plants for Distributed Poly-Generation by Residual Biomass

Author

Listed:
  • M. Costa

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy)

  • A. Buono

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy)

  • C. Caputo

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy
    CMD S.p.A., Research & Development Department, Via Pacinotti, 2, 81020 S. Nicola La Strada (Caserta), Italy
    Industrial Engineering Department, University of Rome “Tor Vergata”, Via del Politecnico, 1, 00133 Rome, Italy)

  • A. Carotenuto

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy)

  • D. Cirillo

    (CMD S.p.A., Research & Development Department, Via Pacinotti, 2, 81020 S. Nicola La Strada (Caserta), Italy)

  • M. A. Costagliola

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy)

  • G. Di Blasio

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy)

  • M. La Villetta

    (CMD S.p.A., Research & Development Department, Via Pacinotti, 2, 81020 S. Nicola La Strada (Caserta), Italy)

  • A. Macaluso

    (Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy
    E.P.M. S.r.l., via G. Porzio, Centro Direzionale Isola A2, 80143 Naples, Italy)

  • G. Martoriello

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy)

  • N. Massarotti

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy)

  • A. Mauro

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy)

  • M. Migliaccio

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy)

  • V. Mulone

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Industrial Engineering Department, University of Rome “Tor Vergata”, Via del Politecnico, 1, 00133 Rome, Italy)

  • F. Murena

    (Chemical Engineering Department, University of Naples “Federico II”, P.le Tecchio, 80, 80125 Naples, Italy)

  • D. Piazzullo

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy)

  • M. V. Prati

    (Istituto Motori, Consiglio Nazionale delle Ricerche (CNR), Via Guglielmo Marconi, 4, 80125 Naples, Italy)

  • V. Rocco

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Industrial Engineering Department, University of Rome “Tor Vergata”, Via del Politecnico, 1, 00133 Rome, Italy)

  • A. Stasi

    (E.P.M. S.r.l., via G. Porzio, Centro Direzionale Isola A2, 80143 Naples, Italy)

  • L. Vanoli

    (CRAVEB, Centro Direzionale, Isola C4, 80143 Naples, Italy
    Engineering Department, University of Naples “Parthenope”, Centro Direzionale, Isola C4, 80143 Naples, Italy)

  • A. Cinocca

    (Department of Industrial and Information Engineering and Economics, University of Aquila, loc. Monteluco di Roio, 67100 L’Aquila, Italy)

  • D. Di Battista

    (Department of Industrial and Information Engineering and Economics, University of Aquila, loc. Monteluco di Roio, 67100 L’Aquila, Italy)

  • A. De Vita

    (Department of Industrial and Information Engineering and Economics, University of Aquila, loc. Monteluco di Roio, 67100 L’Aquila, Italy)

Abstract

The valorization of residual biomass plays today a decisive role in the concept of “circular economy”, according to which each waste material must be reused to its maximum extent. The collection and energy valorization at the local level of biomass from forest management practices and wildfire prevention cutting can be settled in protected areas to contribute to local decarbonization, by removing power generation from fossil fuels. Despite the evident advantages of bioenergy systems, several problems still hinder their diffusion, such as the need to assure their reliability by extending the operating range with materials of different origin. The Italian project “INNOVARE—Innovative plants for distributed poly-generation by residual biomass”, funded by the Italian Ministry of Economic Development (MISE), has the main scope of improving micro-cogeneration technologies fueled by biomass. A micro-combined heat and power (mCHP) unit was chosen as a case study to discuss pros and cons of biomass-powered cogeneration within a national park, especially due to its flexibility of use. The availability of local biomasses (woodchips, olive milling residuals) was established by studying the agro-industrial production and by identifying forest areas to be properly managed through an approach using a satellite location system based on the microwave technology. A detailed synergic numerical and experimental characterization of the selected cogeneration system was performed in order to identify its main inefficiencies. Improvements of its operation were optimized by acting on the engine control strategy and by also adding a post-treatment system on the engine exhaust gas line. Overall, the electrical output was increased by up to 6% using the correct spark timing, and pollutant emissions were reduced well below the limits allowed by legislation by working with a lean mixture and by adopting an oxidizing catalyst. Finally, the global efficiency of the system increased from 45.8% to 63.2%. The right blending of different biomasses led to an important improvement of the reliability of the entire plant despite using an agrifood residual, such as olive pomace. It was demonstrated that the use of this biomass is feasible if its maximum mass percentage in a wood matrix mixture does not exceed 25%. The project was concluded with a real operation demonstration within a national park in Southern Italy by replacing a diesel genset with the analyzed and improved biomass-powered plant and by proving a decisive improvement of air quality in the real environment during exercise.

Suggested Citation

  • M. Costa & A. Buono & C. Caputo & A. Carotenuto & D. Cirillo & M. A. Costagliola & G. Di Blasio & M. La Villetta & A. Macaluso & G. Martoriello & N. Massarotti & A. Mauro & M. Migliaccio & V. Mulone &, 2020. "The “INNOVARE” Project: Innovative Plants for Distributed Poly-Generation by Residual Biomass," Energies, MDPI, vol. 13(15), pages 1-30, August.
  • Handle: RePEc:gam:jeners:v:13:y:2020:i:15:p:4020-:d:394234
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/15/4020/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/13/15/4020/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Maraver, Daniel & Sin, Ana & Royo, Javier & Sebastián, Fernando, 2013. "Assessment of CCHP systems based on biomass combustion for small-scale applications through a review of the technology and analysis of energy efficiency parameters," Applied Energy, Elsevier, vol. 102(C), pages 1303-1313.
    2. Diana Di Luccio & Guido Benassai & Gianluigi Di Paola & Luigi Mucerino & Andrea Buono & Carmen Maria Rosskopf & Ferdinando Nunziata & Maurizio Migliaccio & Angelo Urciuoli & Raffaele Montella, 2019. "Shoreline Rotation Analysis of Embayed Beaches by Means of In Situ and Remote Surveys," Sustainability, MDPI, vol. 11(3), pages 1-20, January.
    3. Coronado, Christian Rodriguez & Yoshioka, Juliana Tiyoko & Silveira, José Luz, 2011. "Electricity, hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier," Renewable Energy, Elsevier, vol. 36(6), pages 1861-1868.
    4. Caresana, Flavio & Brandoni, Caterina & Feliciotti, Petro & Bartolini, Carlo Maria, 2011. "Energy and economic analysis of an ICE-based variable speed-operated micro-cogenerator," Applied Energy, Elsevier, vol. 88(3), pages 659-671, March.
    5. Paola Di Donato & Andrea Buono & Annarita Poli & Ilaria Finore & Gennaro Roberto Abbamondi & Barbara Nicolaus & Licia Lama, 2018. "Exploring Marine Environments for the Identification of Extremophiles and Their Enzymes for Sustainable and Green Bioprocesses," Sustainability, MDPI, vol. 11(1), pages 1-20, December.
    6. Costa, M. & Di Blasio, G. & Prati, M.V. & Costagliola, M.A. & Cirillo, D. & La Villetta, M. & Caputo, C. & Martoriello, G., 2020. "Multi-objective optimization of a syngas powered reciprocating engine equipping a combined heat and power unit," Applied Energy, Elsevier, vol. 275(C).
    7. Scarlat, N. & Dallemand, J.F. & Motola, V. & Monforti-Ferrario, F., 2013. "Bioenergy production and use in Italy: Recent developments, perspectives and potential," Renewable Energy, Elsevier, vol. 57(C), pages 448-461.
    8. Raj, N. Thilak & Iniyan, S. & Goic, Ranko, 2011. "A review of renewable energy based cogeneration technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3640-3648.
    9. Ahmed, I.I. & Gupta, A.K., 2010. "Pyrolysis and gasification of food waste: Syngas characteristics and char gasification kinetics," Applied Energy, Elsevier, vol. 87(1), pages 101-108, January.
    10. Ajay Kumar & David D. Jones & Milford A. Hanna, 2009. "Thermochemical Biomass Gasification: A Review of the Current Status of the Technology," Energies, MDPI, vol. 2(3), pages 1-26, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Carotenuto, Alberto & Di Fraia, Simona & Massarotti, Nicola & Sobek, Szymon & Uddin, M. Rakib & Vanoli, Laura & Werle, Sebastian, 2023. "Predictive modeling for energy recovery from sewage sludge gasification," Energy, Elsevier, vol. 263(PB).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Puig-Arnavat, Maria & Bruno, Joan Carles & Coronas, Alberto, 2014. "Modeling of trigeneration configurations based on biomass gasification and comparison of performance," Applied Energy, Elsevier, vol. 114(C), pages 845-856.
    2. González, Arnau & Riba, Jordi-Roger & Puig, Rita & Navarro, Pere, 2015. "Review of micro- and small-scale technologies to produce electricity and heat from Mediterranean forests׳ wood chips," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 143-155.
    3. Maghanki, Maryam Mohammadi & Ghobadian, Barat & Najafi, Gholamhassan & Galogah, Reza Janzadeh, 2013. "Micro combined heat and power (MCHP) technologies and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 510-524.
    4. Elsner, Witold & Wysocki, Marian & Niegodajew, Paweł & Borecki, Roman, 2017. "Experimental and economic study of small-scale CHP installation equipped with downdraft gasifier and internal combustion engine," Applied Energy, Elsevier, vol. 202(C), pages 213-227.
    5. Wegener, Moritz & Malmquist, Anders & Isalgué, Antonio & Martin, Andrew, 2018. "Biomass-fired combined cooling, heating and power for small scale applications – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 96(C), pages 392-410.
    6. Wang, Jiang-Jiang & Yang, Kun & Xu, Zi-Long & Fu, Chao, 2015. "Energy and exergy analyses of an integrated CCHP system with biomass air gasification," Applied Energy, Elsevier, vol. 142(C), pages 317-327.
    7. Li, Xian & Kan, Xiang & Sun, Xiangyu & Zhao, Yao & Ge, Tianshu & Dai, Yanjun & Wang, Chi-Hwa, 2019. "Performance analysis of a biomass gasification-based CCHP system integrated with variable-effect LiBr-H2O absorption cooling and desiccant dehumidification," Energy, Elsevier, vol. 176(C), pages 961-979.
    8. AlNouss, Ahmed & McKay, Gordon & Al-Ansari, Tareq, 2020. "Enhancing waste to hydrogen production through biomass feedstock blending: A techno-economic-environmental evaluation," Applied Energy, Elsevier, vol. 266(C).
    9. Xia Liu & Juntao Wei & Wei Huo & Guangsuo Yu, 2017. "Gasification under CO 2 –Steam Mixture: Kinetic Model Study Based on Shared Active Sites," Energies, MDPI, vol. 10(11), pages 1-10, November.
    10. Fiore, M. & Magi, V. & Viggiano, A., 2020. "Internal combustion engines powered by syngas: A review," Applied Energy, Elsevier, vol. 276(C).
    11. Pirotta, F.J.C. & Ferreira, E.C. & Bernardo, C.A., 2013. "Energy recovery and impact on land use of Maltese municipal solid waste incineration," Energy, Elsevier, vol. 49(C), pages 1-11.
    12. Ramos, Ana & Monteiro, Eliseu & Rouboa, Abel, 2019. "Numerical approaches and comprehensive models for gasification process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 188-206.
    13. Kim, Dong Kyu & Lee, Ji Sung & Kim, Jinwoo & Kim, Mo Se & Kim, Min Soo, 2017. "Parametric study and performance evaluation of an organic Rankine cycle (ORC) system using low-grade heat at temperatures below 80°C," Applied Energy, Elsevier, vol. 189(C), pages 55-65.
    14. Chang, Huawei & Wan, Zhongmin & Zheng, Yao & Chen, Xi & Shu, Shuiming & Tu, Zhengkai & Chan, Siew Hwa & Chen, Rui & Wang, Xiaodong, 2017. "Energy- and exergy-based working fluid selection and performance analysis of a high-temperature PEMFC-based micro combined cooling heating and power system," Applied Energy, Elsevier, vol. 204(C), pages 446-458.
    15. David Bannon & Mirka Deza & Masoud Masoumi & Bahareh Estejab, 2023. "Assessment of Irregular Biomass Particles Fluidization in Bubbling Fluidized Beds," Energies, MDPI, vol. 16(4), pages 1-20, February.
    16. Neves, Renato Cruz & Klein, Bruno Colling & da Silva, Ricardo Justino & Rezende, Mylene Cristina Alves Ferreira & Funke, Axel & Olivarez-Gómez, Edgardo & Bonomi, Antonio & Maciel-Filho, Rubens, 2020. "A vision on biomass-to-liquids (BTL) thermochemical routes in integrated sugarcane biorefineries for biojet fuel production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    17. Al Moussawi, Houssein & Fardoun, Farouk & Louahlia, Hasna, 2017. "Selection based on differences between cogeneration and trigeneration in various prime mover technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 491-511.
    18. Burra, K.G. & Hussein, M.S. & Amano, R.S. & Gupta, A.K., 2016. "Syngas evolutionary behavior during chicken manure pyrolysis and air gasification," Applied Energy, Elsevier, vol. 181(C), pages 408-415.
    19. Bianchi, M. & De Pascale, A. & Melino, F., 2013. "Performance analysis of an integrated CHP system with thermal and Electric Energy Storage for residential application," Applied Energy, Elsevier, vol. 112(C), pages 928-938.
    20. Jon T. Schroeder & Ava L. Labuzetta & Thomas A. Trabold, 2020. "Assessment of Dehydration as a Commercial-Scale Food Waste Valorization Strategy," Sustainability, MDPI, vol. 12(15), pages 1-13, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:15:p:4020-:d:394234. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.