IDEAS home Printed from https://ideas.repec.org/a/gam/jcltec/v7y2025i2p33-d1632897.html

Member Size Effect in Seebeck Coefficient of Cement Composites Incorporating Silicon Carbide

Author

Listed:
  • Byeong-Hun Woo

    (Civil and Environmental Engineering Department, Hanyang University, Jaesung Civil Engineering Building, 222, Wangsimni-ro, Seongdong-gu, Seoul 04763, Republic of Korea)

  • Kyu-Tae Park

    (Construction Site Division of Lotte Engineering & Construction, 29, Jamwon-ro 14-gil, Seocho-gu, Seoul 06515, Republic of Korea)

  • Kyung-Suk Yoo

    (Civil and Architectural Engineering Department, Seokyeong University, Hanlim Building, 124, Seokyeong-ro, Seongbuik-gu, Seoul 02713, Republic of Korea)

  • Jee-Sang Kim

    (Civil and Architectural Engineering Department, Seokyeong University, Daeil Building, 124, Seokyeong-ro, Seongbuik-gu, Seoul 02713, Republic of Korea)

Abstract

This study investigates the size effect on the Seebeck coefficient (SC) in cement composites incorporating silicon carbide (SiC). Two specimen shapes, cubic (50 × 50 × 50 mm 3 ) and beam (40 × 40 × 160 mm 3 ), were analyzed with varying SiC substitution ratios (0%, 50%, and 100%) for fine aggregates. Thermal and electrical conductivities were measured to assess their influence on the SC. The results showed that a higher SiC content increased porosity, which reduced mechanical strength but significantly improved thermal and electrical conductivities. Thermal conductivity increased from 1.88 W/mK (0% substitution) to 11.89 W/mK (100% substitution), while electrical conductivity showed an improvement from 0.0056 S/m to 0.065 S/m. Cubic specimens exhibited higher SC values compared to beam specimens, with a maximum SC of 1374 μV/K at 100% SiC substitution, attributed to shorter thermal diffusion distances. The findings suggest that optimizing member size and SiC content can significantly improve the thermoelectric performance of cement composites, potentially enhancing energy efficiency in construction applications.

Suggested Citation

  • Byeong-Hun Woo & Kyu-Tae Park & Kyung-Suk Yoo & Jee-Sang Kim, 2025. "Member Size Effect in Seebeck Coefficient of Cement Composites Incorporating Silicon Carbide," Clean Technol., MDPI, vol. 7(2), pages 1-15, April.
    • Handle: RePEc:gam:jcltec:v:7:y:2025:i:2:p:33-:d:1632897
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2571-8797/7/2/33/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2571-8797/7/2/33/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ioannidou, Dimitra & Meylan, Grégoire & Sonnemann, Guido & Habert, Guillaume, 2017. "Is gravel becoming scarce? Evaluating the local criticality of construction aggregates," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 25-33.
    2. Eloneva, Sanni & Teir, Sebastian & Salminen, Justin & Fogelholm, Carl-Johan & Zevenhoven, Ron, 2008. "Fixation of CO2 by carbonating calcium derived from blast furnace slag," Energy, Elsevier, vol. 33(9), pages 1461-1467.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Paulina Rusanowska & Marcin Zieliński & Marcin Dębowski, 2023. "Removal of CO 2 from Biogas during Mineral Carbonation with Waste Materials," IJERPH, MDPI, vol. 20(9), pages 1-10, April.
    2. Sanna, Aimaro & Dri, Marco & Hall, Matthew R. & Maroto-Valer, Mercedes, 2012. "Waste materials for carbon capture and storage by mineralisation (CCSM) – A UK perspective," Applied Energy, Elsevier, vol. 99(C), pages 545-554.
    3. Bascompta, Marc & Sanmiquel, Lluís & Sidki-Rius, Nor & Bonet, Enrique & Yubero, Maria Teresa, 2025. "Quarrying CSR index: Social, economic and environmental factors in the analysis of the quarrying industry," Resources Policy, Elsevier, vol. 103(C).
    4. Said, Arshe & Mattila, Hannu-Petteri & Järvinen, Mika & Zevenhoven, Ron, 2013. "Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2," Applied Energy, Elsevier, vol. 112(C), pages 765-771.
    5. Robin Koch & Gregor Sailer & Sebastian Paczkowski & Stefan Pelz & Jens Poetsch & Joachim Müller, 2021. "Lab-Scale Carbonation of Wood Ash for CO 2 -Sequestration," Energies, MDPI, vol. 14(21), pages 1-11, November.
    6. Zhang, Huining & Gao, Chong & Chen, Ben & Tang, Jiang & He, Dongfeng & Xu, Anjun, 2018. "Stainless steel tailings accelerated direct carbonation process at low pressure: Carbonation efficiency evaluation and chromium leaching inhibition correlation analysis," Energy, Elsevier, vol. 155(C), pages 772-781.
    7. Li, Qing & Wu, Yifan & Song, Xinchen & He, Qihang & Wang, Yunpeng & Jiang, Wenchuan & Lan, Cheng & Zhao, Zhiyu & Liu, Tao & Xie, Heping, 2025. "CO2-ammonia battery using organic proton-coupled electron transfer," Energy, Elsevier, vol. 337(C).
    8. Yafei Zhao & Ken-ichi Itakura, 2023. "A State-of-the-Art Review on Technology for Carbon Utilization and Storage," Energies, MDPI, vol. 16(10), pages 1-22, May.
    9. Chu, Guanrun & Li, Chun & Liu, Weizao & Zhang, Guoquan & Yue, Hairong & Liang, Bin & Wang, Ye & Luo, Dongmei, 2019. "Facile and cost-efficient indirect carbonation of blast furnace slag with multiple high value-added products through a completely wet process," Energy, Elsevier, vol. 166(C), pages 1314-1322.
    10. Josefine A. Olsson & Sabbie A. Miller & Mark G. Alexander, 2023. "Near-term pathways for decarbonizing global concrete production," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    11. Lee, Myung gyu & Jang, Young Nam & Ryu, Kyung won & Kim, Wonbeak & Bang, Jun-Hwan, 2012. "Mineral carbonation of flue gas desulfurization gypsum for CO2 sequestration," Energy, Elsevier, vol. 47(1), pages 370-377.
    12. Inka Randebrock & Sylvia Marinova & Vanessa Bach & Rosalie Arendt & Matthias Finkbeiner, 2023. "Adapting the ESSENZ Method to Assess the Criticality of Construction Materials: Case Study of Herne, Germany," Resources, MDPI, vol. 12(8), pages 1-18, August.
    13. Quader, M. Abdul & Ahmed, Shamsuddin & Ghazilla, Raja Ariffin Raja & Ahmed, Shameem & Dahari, Mahidzal, 2015. "A comprehensive review on energy efficient CO2 breakthrough technologies for sustainable green iron and steel manufacturing," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 594-614.
    14. Jun-Hwan Bang & Seung-Woo Lee & Chiwan Jeon & Sangwon Park & Kyungsun Song & Whan Joo Jo & Soochun Chae, 2016. "Leaching of Metal Ions from Blast Furnace Slag by Using Aqua Regia for CO 2 Mineralization," Energies, MDPI, vol. 9(12), pages 1-13, November.
    15. Escavy, J.I. & Herrero, M.J. & Lopez-Acevedo, F. & Trigos, L., 2022. "The progressive distancing of aggregate quarries from the demand areas: Magnitude, causes, and impact on CO2 emissions in Madrid Region (1995–2018)," Resources Policy, Elsevier, vol. 75(C).
    16. Guanrun Chu & Lin Wang & Weizao Liu & Guoquan Zhang & Dongmei Luo & Liming Wang & Bin Liang & Chun Li, 2019. "Indirect mineral carbonation of chlorinated tailing derived from Ti‐bearing blast‐furnace slag coupled with simultaneous dechlorination and recovery of multiple value‐added products," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 9(1), pages 52-66, February.
    17. Magda Posani & Vera Voney & Pietro Odaglia & Yi Du & Anastasija Komkova & Coralie Brumaud & Benjamin Dillenburger & Guillaume Habert, 2025. "Low-carbon indoor humidity regulation via 3D-printed superhygroscopic building components," Nature Communications, Nature, vol. 16(1), pages 1-17, December.
    18. Casanovas-Rubio, Maria del Mar & Ramos, Gonzalo, 2017. "Decision-making tool for the assessment and selection of construction processes based on environmental criteria: Application to precast and cast-in-situ alternatives," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 107-117.
    19. Evangelos Georgakopoulos & Rafael M. Santos & Yi Wai Chiang & Vasilije Manovic, 2016. "Influence of process parameters on carbonation rate and conversion of steelmaking slags – Introduction of the ‘carbonation weathering rate’," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 6(4), pages 470-491, August.
    20. Budzianowski, Wojciech M., 2012. "Value-added carbon management technologies for low CO2 intensive carbon-based energy vectors," Energy, Elsevier, vol. 41(1), pages 280-297.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jcltec:v:7:y:2025:i:2:p:33-:d:1632897. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager The email address of this maintainer does not seem to be valid anymore. Please ask MDPI Indexing Manager to update the entry or send us the correct address (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.