IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v46y2012icp155-163.html
   My bibliography  Save this article

Geometry parameters effect for air-cooled ejector cooling systems with R134a refrigerant

Author

Listed:
  • Yan, Jia
  • Cai, Wenjian
  • Li, Yanzhong

Abstract

In this paper, a CFD model calibrated by the experimental results from initial designed ejector is used to evaluate the influence of 6 key geometry parameters on the performance (entrainment ratio) of an air-cooled ejector cooling system and, consequently, to find the best design parameters. A new ejector according to the findings from the CFD simulation is then designed and used at the same air-cooled ejector system to verify the simulation results. From both simulation and testing results, we find that: 1) the optimal area ratio, the ratio of primary nozzle exist position and length of constant-area mixing section to primary nozzle diameter are lower than those of water-cooled ejector systems; 2) the optimal converging angle of constant-pressure mixing section and the ratio of primary nozzle exit position and length of constant-area mixing section to the diameter of constant-area mixing section are very close to those of water-cooled ejector systems; 3) substantial performance improvement can be achieved by using the new parameters in the ejector design.

Suggested Citation

  • Yan, Jia & Cai, Wenjian & Li, Yanzhong, 2012. "Geometry parameters effect for air-cooled ejector cooling systems with R134a refrigerant," Renewable Energy, Elsevier, vol. 46(C), pages 155-163.
    • Handle: RePEc:eee:renene:v:46:y:2012:i:c:p:155-163
    DOI: 10.1016/j.renene.2012.03.031
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148112002182
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2012.03.031?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Diaconu, Bogdan M., 2012. "Energy analysis of a solar-assisted ejector cycle air conditioning system with low temperature thermal energy storage," Renewable Energy, Elsevier, vol. 37(1), pages 266-276.
    2. Alexis, G.K. & Rogdakis, E.D., 2002. "Performance of solar driven methanol–water combined ejector–absorption cycle in the Athens area," Renewable Energy, Elsevier, vol. 25(2), pages 249-266.
    3. Alexis, G.K. & Karayiannis, E.K., 2005. "A solar ejector cooling system using refrigerant R134a in the Athens area," Renewable Energy, Elsevier, vol. 30(9), pages 1457-1469.
    4. Meyer, A.J. & Harms, T.M. & Dobson, R.T., 2009. "Steam jet ejector cooling powered by waste or solar heat," Renewable Energy, Elsevier, vol. 34(1), pages 297-306.
    5. Sankarlal, T. & Mani, A., 2007. "Experimental investigations on ejector refrigeration system with ammonia," Renewable Energy, Elsevier, vol. 32(8), pages 1403-1413.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lin, Chen & Cai, Wenjian & Li, Yanzhong & Yan, Jia & Hu, Yu, 2012. "The characteristics of pressure recovery in an adjustable ejector multi-evaporator refrigeration system," Energy, Elsevier, vol. 46(1), pages 148-155.
    2. Braimakis, Konstantinos, 2021. "Solar ejector cooling systems: A review," Renewable Energy, Elsevier, vol. 164(C), pages 566-602.
    3. Chen, Hongjie & Zhu, Jiahua & Ge, Jing & Lu, Wei & Zheng, Lixing, 2020. "A cylindrical mixing chamber ejector analysis model to predict the optimal nozzle exit position," Energy, Elsevier, vol. 208(C).
    4. Wu, Yifei & Zhao, Hongxia & Zhang, Cunquan & Wang, Lei & Han, Jitian, 2018. "Optimization analysis of structure parameters of steam ejector based on CFD and orthogonal test," Energy, Elsevier, vol. 151(C), pages 79-93.
    5. Lixing Zheng & Hongwei Hu & Weibo Wang & Yiyan Zhang & Lingmei Wang, 2022. "Study on Flow Distribution and Structure Optimization in a Mix Chamber and Diffuser of a CO 2 Two-Phase Ejector," Mathematics, MDPI, vol. 10(5), pages 1-16, February.
    6. Lou, Juwei & Wang, Jiangfeng & Chen, Liangqi & Wang, Yikai & Zhao, Pan & Wang, Shunsen, 2023. "Multi-objective optimization and off-design performance evaluation of coaxial turbomachines for a novel energy storage-based recuperated S–CO2 Brayton cycle driven by nuclear energy," Energy, Elsevier, vol. 275(C).
    7. Chen, Jianyong & Jarall, Sad & Havtun, Hans & Palm, Björn, 2015. "A review on versatile ejector applications in refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 67-90.
    8. Tang, Yongzhi & Liu, Zhongliang & Li, Yanxia & Shi, Can & Lv, Chen, 2019. "A combined pressure regulation technology with multi-optimization of the entrainment passage for performance improvement of the steam ejector in MED-TVC desalination system," Energy, Elsevier, vol. 175(C), pages 46-57.
    9. Tashtoush, Bourhan M. & Al-Nimr, Moh'd A. & Khasawneh, Mohammad A., 2019. "A comprehensive review of ejector design, performance, and applications," Applied Energy, Elsevier, vol. 240(C), pages 138-172.
    10. Li, Shengyu & Yan, Jia & Liu, Zhan & Yao, Yong & Li, Xianbi & Wen, Na & Zou, Guorong, 2019. "Optimization on crucial ejector geometries in a multi-evaporator refrigeration system for tropical region refrigerated trucks," Energy, Elsevier, vol. 189(C).
    11. Wang, Chen & Wang, Lei & Wang, Xinli & Zhao, Hongxia, 2017. "Design and numerical investigation of an adaptive nozzle exit position ejector in multi-effect distillation desalination system," Energy, Elsevier, vol. 140(P1), pages 673-681.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zeyghami, Mehdi & Goswami, D. Yogi & Stefanakos, Elias, 2015. "A review of solar thermo-mechanical refrigeration and cooling methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1428-1445.
    2. Yan, Jia & Cai, Wenjian & Zhao, Lei & Li, Yanzhong & Lin, Chen, 2013. "Performance evaluation of a combined ejector-vapor compression cycle," Renewable Energy, Elsevier, vol. 55(C), pages 331-337.
    3. Besagni, Giorgio & Mereu, Riccardo & Inzoli, Fabio, 2016. "Ejector refrigeration: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 373-407.
    4. Yu, Jianlin & Du, Zhenxing, 2010. "Theoretical study of a transcritical ejector refrigeration cycle with refrigerant R143a," Renewable Energy, Elsevier, vol. 35(9), pages 2034-2039.
    5. Braimakis, Konstantinos, 2021. "Solar ejector cooling systems: A review," Renewable Energy, Elsevier, vol. 164(C), pages 566-602.
    6. Tashtoush, Bourhan M. & Al-Nimr, Moh'd A. & Khasawneh, Mohammad A., 2019. "A comprehensive review of ejector design, performance, and applications," Applied Energy, Elsevier, vol. 240(C), pages 138-172.
    7. Allouche, Yosr & Varga, Szabolcs & Bouden, Chiheb & Oliveira, Armando C., 2017. "Dynamic simulation of an integrated solar-driven ejector based air conditioning system with PCM cold storage," Applied Energy, Elsevier, vol. 190(C), pages 600-611.
    8. Chen, Xiangjie & Omer, Siddig & Worall, Mark & Riffat, Saffa, 2013. "Recent developments in ejector refrigeration technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 629-651.
    9. Ramesh, A.S. & Sekhar, S. Joseph, 2018. "Experimental and numerical investigations on the effect of suction chamber angle and nozzle exit position of a steam-jet ejector," Energy, Elsevier, vol. 164(C), pages 1097-1113.
    10. Javani, N. & Dincer, I. & Naterer, G.F., 2012. "Thermodynamic analysis of waste heat recovery for cooling systems in hybrid and electric vehicles," Energy, Elsevier, vol. 46(1), pages 109-116.
    11. Andrés Villarruel-Jaramillo & Manuel Pérez-García & José M. Cardemil & Rodrigo A. Escobar, 2021. "Review of Polygeneration Schemes with Solar Cooling Technologies and Potential Industrial Applications," Energies, MDPI, vol. 14(20), pages 1-30, October.
    12. Ersoy, H. Kursad & Yalcin, Sakir & Yapici, Rafet & Ozgoren, Muammer, 2007. "Performance of a solar ejector cooling-system in the southern region of Turkey," Applied Energy, Elsevier, vol. 84(9), pages 971-983, September.
    13. Sözen, Adnan & Özalp, Mehmet, 2005. "Solar-driven ejector-absorption cooling system," Applied Energy, Elsevier, vol. 80(1), pages 97-113, January.
    14. Mouhammad El Hassan, 2022. "System COP of Ejector-Based Ground-Source Heat Pumps," Energies, MDPI, vol. 15(22), pages 1-14, November.
    15. Wang, Jiangfeng & Dai, Yiping & Gao, Lin & Ma, Shaolin, 2009. "A new combined cooling, heating and power system driven by solar energy," Renewable Energy, Elsevier, vol. 34(12), pages 2780-2788.
    16. Kojok, Farah & Fardoun, Farouk & Younes, Rafic & Outbib, Rachid, 2016. "Hybrid cooling systems: A review and an optimized selection scheme," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 57-80.
    17. Wu, Suzhi & Lin, Guoxing & Chen, Jincan, 2005. "Optimum thermoeconomic and thermodynamic performance characteristics of an irreversible three-heat-source heat pump," Renewable Energy, Elsevier, vol. 30(15), pages 2257-2271.
    18. Chesi, Andrea & Ferrara, Giovanni & Ferrari, Lorenzo & Tarani, Fabio, 2012. "Suitability of coupling a solar powered ejection cycle with a vapour compression refrigerating machine," Applied Energy, Elsevier, vol. 97(C), pages 374-383.
    19. Zhang, Kun & Chen, Xue & Markides, Christos N. & Yang, Yong & Shen, Shengqiang, 2016. "Evaluation of ejector performance for an organic Rankine cycle combined power and cooling system," Applied Energy, Elsevier, vol. 184(C), pages 404-412.
    20. Stritih, Uros & Osterman, Eneja & Evliya, Hunay & Butala, Vincenc & Paksoy, Halime, 2013. "Exploiting solar energy potential through thermal energy storage in Slovenia and Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 442-461.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:46:y:2012:i:c:p:155-163. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.