IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v28y2003i1p59-69.html
   My bibliography  Save this article

Heat-transfer aspects of Stirling power generation using incinerator waste energy

Author

Listed:
  • Hsu, S.T.
  • Lin, F.Y.
  • Chiou, J.S.

Abstract

The integration of a free-piston Stirling engine with linear alternator and an incinerator is able to effectively recover the waste energy and generate electrical power. In this study, a cycle-averaged heat transfer model is employed to investigate the performance of a free-piston Stirling engine installed on an incinerator. With the input of source and sink temperatures and other realistic heat transfer coefficients, the efficiency and the optimal power output are estimated, and the effect induced by internal and external irreversibilities is also evaluated. The proposed approach and modeling results presented in this study provide valuable information for engineers and designers to recover energy from small-scale incinerators.

Suggested Citation

  • Hsu, S.T. & Lin, F.Y. & Chiou, J.S., 2003. "Heat-transfer aspects of Stirling power generation using incinerator waste energy," Renewable Energy, Elsevier, vol. 28(1), pages 59-69.
    • Handle: RePEc:eee:renene:v:28:y:2003:i:1:p:59-69
    DOI: 10.1016/S0960-1481(02)00018-6
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148102000186
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/S0960-1481(02)00018-6?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Korobitsyn, M.A & Jellema, P & Hirs, G.G, 1999. "Possibilities for gas turbine and waste incinerator integration," Energy, Elsevier, vol. 24(9), pages 783-793.
    2. Podesser, Erich, 1999. "Electricity production in rural villages with a biomass Stirling engine," Renewable Energy, Elsevier, vol. 16(1), pages 1049-1052.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Thombare, D.G. & Verma, S.K., 2008. "Technological development in the Stirling cycle engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(1), pages 1-38, January.
    2. Chen, Wen-Lih & Chen, Chao-Kuang & Fang, Mao-Ju & Yang, Yu-Ching, 2018. "A numerical study on applying slot-grooved displacer cylinder to a γ-type medium-temperature-differential stirling engine," Energy, Elsevier, vol. 144(C), pages 679-693.
    3. Hsieh, Y.C. & Hsu, T.C. & Chiou, J.S., 2008. "Integration of a free-piston Stirling engine and a moving grate incinerator," Renewable Energy, Elsevier, vol. 33(1), pages 48-54.
    4. Karabulut, H. & Çınar, C. & Oztürk, E. & Yücesu, H.S., 2010. "Torque and power characteristics of a helium charged Stirling engine with a lever controlled displacer driving mechanism," Renewable Energy, Elsevier, vol. 35(1), pages 138-143.
    5. Karabulut, Halit, 2011. "Dynamic analysis of a free piston Stirling engine working with closed and open thermodynamic cycles," Renewable Energy, Elsevier, vol. 36(6), pages 1704-1709.
    6. Kongtragool, Bancha & Wongwises, Somchai, 2003. "A review of solar-powered Stirling engines and low temperature differential Stirling engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 7(2), pages 131-154, April.
    7. Ahmadi, Mohammad H. & Ahmadi, Mohammad-Ali & Pourfayaz, Fathollah, 2017. "Thermal models for analysis of performance of Stirling engine: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P1), pages 168-184.
    8. Ahmadi, Mohammad H. & Ahmadi, Mohammad Ali & Pourfayaz, Fathollah & Hosseinzade, Hadi & Acıkkalp, Emin & Tlili, Iskander & Feidt, Michel, 2016. "Designing a powered combined Otto and Stirling cycle power plant through multi-objective optimization approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 585-595.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dias, Marina O.S. & Modesto, Marcelo & Ensinas, Adriano V. & Nebra, Silvia A. & Filho, Rubens Maciel & Rossell, Carlos E.V., 2011. "Improving bioethanol production from sugarcane: evaluation of distillation, thermal integration and cogeneration systems," Energy, Elsevier, vol. 36(6), pages 3691-3703.
    2. Bianchi, Michele & Branchini, Lisa & Cesari, Simone & De Pascale, Andrea & Melino, Francesco, 2015. "Repowering existing under-utilized WTE power plant with gas turbines," Applied Energy, Elsevier, vol. 160(C), pages 902-911.
    3. Maraver, Daniel & Sin, Ana & Royo, Javier & Sebastián, Fernando, 2013. "Assessment of CCHP systems based on biomass combustion for small-scale applications through a review of the technology and analysis of energy efficiency parameters," Applied Energy, Elsevier, vol. 102(C), pages 1303-1313.
    4. Heyne, Stefan & Harvey, Simon, 2013. "Assessment of the energy and economic performance of second generation biofuel production processes using energy market scenarios," Applied Energy, Elsevier, vol. 101(C), pages 203-212.
    5. Ferreira, Ana Cristina & Silva, João & Teixeira, Senhorinha & Teixeira, José Carlos & Nebra, Silvia Azucena, 2020. "Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass," Renewable Energy, Elsevier, vol. 154(C), pages 581-597.
    6. Poma, Christian & Verda, Vittorio & Consonni, Stefano, 2010. "Design and performance evaluation of a waste-to-energy plant integrated with a combined cycle," Energy, Elsevier, vol. 35(2), pages 786-793.
    7. Franco Cotana & Antonio Messineo & Alessandro Petrozzi & Valentina Coccia & Gianluca Cavalaglio & Andrea Aquino, 2014. "Comparison of ORC Turbine and Stirling Engine to Produce Electricity from Gasified Poultry Waste," Sustainability, MDPI, vol. 6(9), pages 1-16, August.
    8. Paul, Christopher J. & Engeda, Abraham, 2015. "A Stirling engine for use with lower quality fuels," Energy, Elsevier, vol. 84(C), pages 152-160.
    9. Schneider, T. & Müller, D. & Karl, J., 2020. "A review of thermochemical biomass conversion combined with Stirling engines for the small-scale cogeneration of heat and power," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    10. Bert, Juliette & Chrenko, Daniela & Sophy, Tonino & Le Moyne, Luis & Sirot, Frédéric, 2014. "Simulation, experimental validation and kinematic optimization of a Stirling engine using air and helium," Energy, Elsevier, vol. 78(C), pages 701-712.
    11. Bert, Juliette & Chrenko, Daniela & Sophy, Tonino & Le Moyne, Luis & Sirot, Frédéric, 2012. "Zero dimensional finite-time thermodynamic, three zones numerical model of a generic Stirling and its experimental validation," Renewable Energy, Elsevier, vol. 47(C), pages 167-174.
    12. Granada, E. & Patiño, D. & Collazo, J. & Moran, J.C. & Porteiro, J., 2009. "Available exhaust gas power in different configurations in a pellet stove plant," Renewable Energy, Elsevier, vol. 34(12), pages 2852-2859.
    13. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B. & Peultier, P., 2013. "Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle," Energy, Elsevier, vol. 49(C), pages 229-239.
    14. Pihl, Erik & Heyne, Stefan & Thunman, Henrik & Johnsson, Filip, 2010. "Highly efficient electricity generation from biomass by integration and hybridization with combined cycle gas turbine (CCGT) plants for natural gas," Energy, Elsevier, vol. 35(10), pages 4042-4052.
    15. González, Arnau & Riba, Jordi-Roger & Puig, Rita & Navarro, Pere, 2015. "Review of micro- and small-scale technologies to produce electricity and heat from Mediterranean forests׳ wood chips," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 143-155.
    16. Bianchi, Michele & Branchini, Lisa & De Pascale, Andrea, 2014. "Combining waste-to-energy steam cycle with gas turbine units," Applied Energy, Elsevier, vol. 130(C), pages 764-773.
    17. Costante Mario Invernizzi & Nadeem Ahmed Sheikh, 2018. "High-Efficiency Small-Scale Combined Heat and Power Organic Binary Rankine Cycles," Energies, MDPI, vol. 11(4), pages 1-15, April.
    18. Men, Yiyu & Liu, Xiaohua & Zhang, Tao, 2021. "A review of boiler waste heat recovery technologies in the medium-low temperature range," Energy, Elsevier, vol. 237(C).
    19. Holmgren, Kristina, 2006. "Role of a district-heating network as a user of waste-heat supply from various sources - the case of Göteborg," Applied Energy, Elsevier, vol. 83(12), pages 1351-1367, December.
    20. Singh, Kuljeet & Hachem-Vermette, Caroline, 2019. "Influence of mixed-use neighborhood developments on the performance of waste-to-energy CHP plant," Energy, Elsevier, vol. 189(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:28:y:2003:i:1:p:59-69. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.