IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v147y2020ip1p1623-1631.html
   My bibliography  Save this article

Influence of the modification of asymmetric trailing-edge thickness on the aerodynamic performance of a wind turbine airfoil

Author

Listed:
  • Hongpeng, Liu
  • Yu, Wang
  • Rujing, Yan
  • Peng, Xu
  • Qing, Wang

Abstract

In this paper, the influences of trailing thickness and asymmetric modification factor on the aerodynamic performance were studied using the commercial numerical simulation package FLUENT®. In addition, three methods were used to minimize the drag coefficient, including affixing a zigzag trailing-edge on the trailing edge of the airfoil, a slotted airfoil, and a combination of the zigzag method and the slotted airfoil. The results showed that the trailing thickness and the asymmetric modification factor significantly affected the aerodynamic performance of the airfoil. Meanwhile, the results from the three drag-reducing methods showed that affixing a zigzag trailing-edge reduced the airfoil drag at the expense of a certain amount of lift coefficient at low angle of attacks (AOAs). Furthermore, the use of slotted airfoil produced both the increase in lift coefficient and the decrease in drag coefficient at high AOAs. The use of the combination of zigzag trailing-edge and the slotted airfoil not only reduced the increase in drag caused by the slotted airfoil at low AOAs and by the zigzag trailing-edge at high AOAs, but also reduced the decrease in lift coefficient, which was caused by the zigzag trailing-edge.

Suggested Citation

  • Hongpeng, Liu & Yu, Wang & Rujing, Yan & Peng, Xu & Qing, Wang, 2020. "Influence of the modification of asymmetric trailing-edge thickness on the aerodynamic performance of a wind turbine airfoil," Renewable Energy, Elsevier, vol. 147(P1), pages 1623-1631.
  • Handle: RePEc:eee:renene:v:147:y:2020:i:p1:p:1623-1631
    DOI: 10.1016/j.renene.2019.09.073
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014811931403X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2019.09.073?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Lee, Hakjin & Lee, Duck-Joo, 2019. "Numerical investigation of the aerodynamics and wake structures of horizontal axis wind turbines by using nonlinear vortex lattice method," Renewable Energy, Elsevier, vol. 132(C), pages 1121-1133.
    2. Zhang, Xu & Li, Wei & Liu, Hailong, 2015. "Numerical simulation of the effect of relative thickness on aerodynamic performance improvement of asymmetrical blunt trailing-edge modification," Renewable Energy, Elsevier, vol. 80(C), pages 489-497.
    3. Gao, Linyue & Zhang, Hui & Liu, Yongqian & Han, Shuang, 2015. "Effects of vortex generators on a blunt trailing-edge airfoil for wind turbines," Renewable Energy, Elsevier, vol. 76(C), pages 303-311.
    4. Kim, Taehyung & Jeon, Minu & Lee, Soogab & Shin, Hyungki, 2014. "Numerical simulation of flatback airfoil aerodynamic noise," Renewable Energy, Elsevier, vol. 65(C), pages 192-201.
    5. Yang, Hua & Shen, Wenzhong & Xu, Haoran & Hong, Zedong & Liu, Chao, 2014. "Prediction of the wind turbine performance by using BEM with airfoil data extracted from CFD," Renewable Energy, Elsevier, vol. 70(C), pages 107-115.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shafiqur Rehman & Md. Mahbub Alam & Luai M. Alhems & M. Mujahid Rafique, 2018. "Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement—A Review," Energies, MDPI, vol. 11(3), pages 1-34, February.
    2. Chen, Bei & Hua, Xugang & Zhang, Zili & Nielsen, Søren R.K. & Chen, Zhengqing, 2021. "Active flutter control of the wind turbines using double-pitched blades," Renewable Energy, Elsevier, vol. 163(C), pages 2081-2097.
    3. Serdar GENÇ, Mustafa & KOCA, Kemal & AÇIKEL, Halil Hakan, 2019. "Investigation of pre-stall flow control on wind turbine blade airfoil using roughness element," Energy, Elsevier, vol. 176(C), pages 320-334.
    4. Erkan, Onur & Özkan, Musa & Karakoç, T. Hikmet & Garrett, Stephen J. & Thomas, Peter J., 2020. "Investigation of aerodynamic performance characteristics of a wind-turbine-blade profile using the finite-volume method," Renewable Energy, Elsevier, vol. 161(C), pages 1359-1367.
    5. Zhaohuang Zhang & Weiwei Li, 2022. "Calculation of the Strength of Vortex Currents Induced by Vortex Generators on Flat Plates and the Evaluation of Their Performance," Energies, MDPI, vol. 15(7), pages 1-15, March.
    6. Huang, Haoda & Liu, Qingsong & Yue, Minnan & Miao, Weipao & Wang, Peilin & Li, Chun, 2023. "Fully coupled aero-hydrodynamic analysis of a biomimetic fractal semi-submersible floating offshore wind turbine under wind-wave excitation conditions," Renewable Energy, Elsevier, vol. 203(C), pages 280-300.
    7. Hyungki Shin & Hogeon Kim & Taehyung Kim & Soo-Hyun Kim & Soogab Lee & Young-Jin Baik & Gilbong Lee, 2017. "Numerical Analysis of Flatback Trailing Edge Airfoil to Reduce Noise in Power Generation Cycle," Energies, MDPI, vol. 10(7), pages 1-22, June.
    8. Cai, Chang & Yang, Yingjian & Jia, Yan & Wu, Guangxing & Zhang, Hairui & Yuan, Feiqi & Qian, Quan & Li, Qing'an, 2023. "Aerodynamic load evaluation of leading edge and trailing edge windward states of large-scale wind turbine blade under parked condition," Applied Energy, Elsevier, vol. 350(C).
    9. Solís-Gallego, I. & Meana-Fernández, A. & Fernández Oro, J.M. & Argüelles Díaz, K.M. & Velarde-Suárez, S., 2018. "LES-based numerical prediction of the trailing edge noise in a small wind turbine airfoil at different angles of attack," Renewable Energy, Elsevier, vol. 120(C), pages 241-254.
    10. Zhong, Junwei & Li, Jingyin & Liu, Huizhong, 2023. "Dynamic mode decomposition analysis of flow separation control on wind turbine airfoil using leading−edge rod," Energy, Elsevier, vol. 268(C).
    11. Bhavsar, Het & Roy, Sukanta & Niyas, Hakeem, 2023. "Aerodynamic performance enhancement of the DU99W405 airfoil for horizontal axis wind turbines using slotted airfoil configuration," Energy, Elsevier, vol. 263(PA).
    12. Win Naung, Shine & Nakhchi, Mahdi Erfanian & Rahmati, Mohammad, 2021. "High-fidelity CFD simulations of two wind turbines in arrays using nonlinear frequency domain solution method," Renewable Energy, Elsevier, vol. 174(C), pages 984-1005.
    13. Arabgolarcheh, Alireza & Rouhollahi, Amirhossein & Benini, Ernesto, 2023. "Analysis of middle-to-far wake behind floating offshore wind turbines in the presence of multiple platform motions," Renewable Energy, Elsevier, vol. 208(C), pages 546-560.
    14. Md Zishan Akhter & Farag Khalifa Omar, 2021. "Review of Flow-Control Devices for Wind-Turbine Performance Enhancement," Energies, MDPI, vol. 14(5), pages 1-35, February.
    15. Francesco Mazzeo & Derek Micheletto & Alessandro Talamelli & Antonio Segalini, 2022. "An Experimental Study on a Wind Turbine Rotor Affected by Pitch Imbalance," Energies, MDPI, vol. 15(22), pages 1-16, November.
    16. Li, Qing’an & Xu, Jianzhong & Kamada, Yasunari & Takao, Maeda & Nishimura, Shogo & Wu, Guangxing & Cai, Chang, 2020. "Experimental investigations of airfoil surface flow of a horizontal axis wind turbine with LDV measurements," Energy, Elsevier, vol. 191(C).
    17. Sergio Chillon & Antxon Uriarte-Uriarte & Iñigo Aramendia & Pablo Martínez-Filgueira & Unai Fernandez-Gamiz & Iosu Ibarra-Udaeta, 2020. "jBAY Modeling of Vane-Type Vortex Generators and Study on Airfoil Aerodynamic Performance," Energies, MDPI, vol. 13(10), pages 1-15, May.
    18. Gorle, J.M.R. & Chatellier, L. & Pons, F. & Ba, M., 2019. "Modulated circulation control around the blades of a vertical axis hydrokinetic turbine for flow control and improved performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 363-377.
    19. Takanori Uchida, 2020. "Effects of Inflow Shear on Wake Characteristics of Wind-Turbines over Flat Terrain," Energies, MDPI, vol. 13(14), pages 1-31, July.
    20. Jianhua Xu & Zhonghua Han & Xiaochao Yan & Wenping Song, 2019. "Design Optimization of a Multi-Megawatt Wind Turbine Blade with the NPU-MWA Airfoil Family," Energies, MDPI, vol. 12(17), pages 1-24, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:147:y:2020:i:p1:p:1623-1631. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.