IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v76y2015icp303-311.html

Effects of vortex generators on a blunt trailing-edge airfoil for wind turbines

Author

Listed:
  • Gao, Linyue
  • Zhang, Hui
  • Liu, Yongqian
  • Han, Shuang

Abstract

Vortex generators (VGs) are commonly-used effective flow separation control devices, and are proved to have potential to improve the aerodynamic performance of large wind turbines. In this paper, the flow physics of VGs and how their size affects the aerodynamic performance of a blunt trailing-edge airfoil DU97-W-300 have been investigated using CFD simulations. Based on wind turbine dedicated airfoil with and without VGs respectively, three-dimensional numerical models were established and further validated through the comparisons between the numerical results and the experimental data. The effects of VGs' size were analyzed from several perspectives, such as trailing-edge height, length, short and long spacing between an adjacent pair of VGs. The results indicate that drag penalty is more sensitive to the increase of VG height than lift; an increment of VG length leads to negative effects on both lift and drag; increases of the spacing between an adjacent pair of VGs have positive impact on suppression of separated flow. Additionally, the flow field characteristics were further revealed by the analysis of streamlines and vortices in the wake region.

Suggested Citation

  • Gao, Linyue & Zhang, Hui & Liu, Yongqian & Han, Shuang, 2015. "Effects of vortex generators on a blunt trailing-edge airfoil for wind turbines," Renewable Energy, Elsevier, vol. 76(C), pages 303-311.
    • Handle: RePEc:eee:renene:v:76:y:2015:i:c:p:303-311
    DOI: 10.1016/j.renene.2014.11.043
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148114007587
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2014.11.043?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Chamorro, Leonardo P. & Arndt, R.E.A. & Sotiropoulos, F., 2013. "Drag reduction of large wind turbine blades through riblets: Evaluation of riblet geometry and application strategies," Renewable Energy, Elsevier, vol. 50(C), pages 1095-1105.
    2. Fischer, Gunter Reinald & Kipouros, Timoleon & Savill, Anthony Mark, 2014. "Multi-objective optimisation of horizontal axis wind turbine structure and energy production using aerofoil and blade properties as design variables," Renewable Energy, Elsevier, vol. 62(C), pages 506-515.
    3. Lago, Lucas I. & Ponta, Fernando L. & Otero, Alejandro D., 2013. "Analysis of alternative adaptive geometrical configurations for the NREL-5 MW wind turbine blade," Renewable Energy, Elsevier, vol. 59(C), pages 13-22.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yuquan Meng & Yuhang Yang & Haseung Chung & Pil-Ho Lee & Chenhui Shao, 2018. "Enhancing Sustainability and Energy Efficiency in Smart Factories: A Review," Sustainability, MDPI, vol. 10(12), pages 1-28, December.
    2. Scott, Samuel & Capuzzi, Marco & Langston, David & Bossanyi, Ervin & McCann, Graeme & Weaver, Paul M. & Pirrera, Alberto, 2017. "Effects of aeroelastic tailoring on performance characteristics of wind turbine systems," Renewable Energy, Elsevier, vol. 114(PB), pages 887-903.
    3. Taurista P. Syawitri & Yufeng Yao & Jun Yao & Budi Chandra, 2022. "A review on the use of passive flow control devices as performance enhancement of lift‐type vertical axis wind turbines," Wiley Interdisciplinary Reviews: Energy and Environment, Wiley Blackwell, vol. 11(4), July.
    4. Dang, Zhigao & Song, Baowei & Mao, Zhaoyong & Yang, Guangyong, 2022. "Performance analysis of a horizontal axis ocean current turbine with spanwise microgrooved surface," Renewable Energy, Elsevier, vol. 192(C), pages 655-667.
    5. Rezaei, Ramtin & Fromme, Paul & Duffour, Philippe, 2018. "Fatigue life sensitivity of monopile-supported offshore wind turbines to damping," Renewable Energy, Elsevier, vol. 123(C), pages 450-459.
    6. Lee, Kyoungsoo & Huque, Ziaul & Kommalapati, Raghava & Han, Sang-Eul, 2016. "Evaluation of equivalent structural properties of NREL phase VI wind turbine blade," Renewable Energy, Elsevier, vol. 86(C), pages 796-818.
    7. Liu, Wenyi, 2016. "Design and kinetic analysis of wind turbine blade-hub-tower coupled system," Renewable Energy, Elsevier, vol. 94(C), pages 547-557.
    8. Nejra Beganovic & Jackson G. Njiri & Dirk Söffker, 2018. "Reduction of Structural Loads in Wind Turbines Based on an Adapted Control Strategy Concerning Online Fatigue Damage Evaluation Models," Energies, MDPI, vol. 11(12), pages 1-15, December.
    9. McKenna, R. & Ostman v.d. Leye, P. & Fichtner, W., 2016. "Key challenges and prospects for large wind turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1212-1221.
    10. Wang, Longjun & Alam, Md. Mahbub & Rehman, Shafiqur & Zhou, Yu, 2022. "Effects of blowing and suction jets on the aerodynamic performance of wind turbine airfoil," Renewable Energy, Elsevier, vol. 196(C), pages 52-64.
    11. Del Valle Carrasco, Arturo & Valles-Rosales, Delia J. & Mendez, Luis C. & Rodriguez, Manuel I., 2016. "A site-specific design of a fixed-pitch fixed-speed wind turbine blade for energy optimization using surrogate models," Renewable Energy, Elsevier, vol. 88(C), pages 112-119.
    12. Wu, Siyuan & Cai, Chang & Zhang, Lei & Hu, Zhiqiang & Sun, Xiangyu & Zhong, Xiaohui & Peng, Chaoyi & Meng, Keqilao & Kou, Jianyu & Li, Qing’an, 2025. "Optimizing wind turbine blade performance: A multi-objective approach for power, load and stall characteristics," Energy, Elsevier, vol. 331(C).
    13. Hashem, I. & Mohamed, M.H., 2018. "Aerodynamic performance enhancements of H-rotor Darrieus wind turbine," Energy, Elsevier, vol. 142(C), pages 531-545.
    14. Wang, Ying & Li, Gaohui & Shen, Sheng & Huang, Diangui & Zheng, Zhongquan, 2018. "Investigation on aerodynamic performance of horizontal axis wind turbine by setting micro-cylinder in front of the blade leading edge," Energy, Elsevier, vol. 143(C), pages 1107-1124.
    15. Zhu, Jie & Zhou, Zhong & Cai, Xin, 2020. "Multi-objective aerodynamic and structural integrated optimization design of wind turbines at the system level through a coupled blade-tower model," Renewable Energy, Elsevier, vol. 150(C), pages 523-537.
    16. Sessarego, Matias & Feng, Ju & Ramos-García, Néstor & Horcas, Sergio González, 2020. "Design optimization of a curved wind turbine blade using neural networks and an aero-elastic vortex method under turbulent inflow," Renewable Energy, Elsevier, vol. 146(C), pages 1524-1535.
    17. Rodrigues, S.S. & Marta, A.C., 2019. "On addressing wind turbine noise with after-market shape blade add-ons," Renewable Energy, Elsevier, vol. 140(C), pages 602-614.
    18. Akhter, Md Zishan & Ali, Ahmed Riyadh & Jawahar, Hasan Kamliya & Omar, Farag Khalifa & Elnajjar, Emad, 2023. "Performance enhancement of small-scale wind turbine featuring morphing blades," Energy, Elsevier, vol. 278(C).
    19. Lee, Kyoungsoo & Huque, Ziaul & Kommalapati, Raghava & Han, Sang-Eul, 2017. "Fluid-structure interaction analysis of NREL phase VI wind turbine: Aerodynamic force evaluation and structural analysis using FSI analysis," Renewable Energy, Elsevier, vol. 113(C), pages 512-531.
    20. Shafiqur Rehman & Md. Mahbub Alam & Luai M. Alhems & M. Mujahid Rafique, 2018. "Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement—A Review," Energies, MDPI, vol. 11(3), pages 1-34, February.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:76:y:2015:i:c:p:303-311. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.