IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v101y2017icp816-834.html
   My bibliography  Save this article

Development of a dynamic model for a hybrid photovoltaic thermal collector – Solar air heater with fins

Author

Listed:
  • Fan, Wenke
  • Kokogiannakis, Georgios
  • Ma, Zhenjun
  • Cooper, Paul

Abstract

A dynamic model for a hybrid Photovoltaic Thermal Collector-Solar Air Heater (PVT-SAH) with longitudinal fins was developed to enable assessment of the potential of the system to provide high temperature outlet air (60–90 °C) under dynamic boundary conditions. The model description includes the method for discretising the system into a number of control volumes, the energy balance equations for each control volume and the implementation of the numerical solution. Model validation has been successfully undertaken by using empirical verification of model predictions with an experimental facility and by comparing the model outputs with the reference data from the literature. The dynamic PVT-SAH model was then used under variable boundary conditions and its performance was compared with an equivalent steady state model. Significant Time Constants (TC) were observed and it was found that the steady state model could overestimate the thermal energy gains of PVT-SAH by 35% when compared with the predictions of the dynamic model. Additional simulations were run under fixed boundary conditions to shown the effect of fins on the performance of the PVT-SAH system. Finally, to demonstrate the benefits of using such a dynamic PVT-SAH model, a case study was used and the effect of length ratio of PVT to SAH was investigated by using a range of performance criteria.

Suggested Citation

  • Fan, Wenke & Kokogiannakis, Georgios & Ma, Zhenjun & Cooper, Paul, 2017. "Development of a dynamic model for a hybrid photovoltaic thermal collector – Solar air heater with fins," Renewable Energy, Elsevier, vol. 101(C), pages 816-834.
  • Handle: RePEc:eee:renene:v:101:y:2017:i:c:p:816-834
    DOI: 10.1016/j.renene.2016.09.039
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148116308291
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2016.09.039?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yeh, Ho-Ming & Ho, Chii-Dong & Hou, Jun-Ze, 1999. "The improvement of collector efficiency in solar air heaters by simultaneously air flow over and under the absorbing plate," Energy, Elsevier, vol. 24(10), pages 857-871.
    2. Kumar, Sharad & Saini, R.P., 2009. "CFD based performance analysis of a solar air heater duct provided with artificial roughness," Renewable Energy, Elsevier, vol. 34(5), pages 1285-1291.
    3. Hj. Othman, Mohd. Yusof & Yatim, Baharudin & Sopian, Kamaruzzaman & Abu Bakar, Mohd. Nazari, 2005. "Performance analysis of a double-pass photovoltaic/thermal (PV/T) solar collector with CPC and fins," Renewable Energy, Elsevier, vol. 30(13), pages 2005-2017.
    4. Tchinda, Réné, 2009. "A review of the mathematical models for predicting solar air heaters systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(8), pages 1734-1759, October.
    5. Sohel, M. Imroz & Ma, Zhenjun & Cooper, Paul & Adams, Jamie & Scott, Robert, 2014. "A dynamic model for air-based photovoltaic thermal systems working under real operating conditions," Applied Energy, Elsevier, vol. 132(C), pages 216-225.
    6. Yeh, H.-M. & Ho, C.-D. & Hou, J.-Z., 2002. "Collector efficiency of double-flow solar air heaters with fins attached," Energy, Elsevier, vol. 27(8), pages 715-727.
    7. Choudhury, C. & Chauhan, P.M. & Garg, H.P., 1995. "Design curves for conventional solar air heaters," Renewable Energy, Elsevier, vol. 6(7), pages 739-749.
    8. Ramadan, M.R.I. & El-Sebaii, A.A. & Aboul-Enein, S. & El-Bialy, E., 2007. "Thermal performance of a packed bed double-pass solar air heater," Energy, Elsevier, vol. 32(8), pages 1524-1535.
    9. Garg, H.P. & Adhikari, R.S., 1997. "Conventional hybrid photovoltaic/thermal (PV/T) air heating collectors: steady-state simulation," Renewable Energy, Elsevier, vol. 11(3), pages 363-385.
    10. Naphon, Paisarn, 2005. "On the performance and entropy generation of the double-pass solar air heater with longitudinal fins," Renewable Energy, Elsevier, vol. 30(9), pages 1345-1357.
    11. Kabeel, A.E. & Mečárik, K., 1998. "Shape optimization for absorber plates of solar air collectors," Renewable Energy, Elsevier, vol. 13(1), pages 121-131.
    12. Bosanac, M. & Brunotte, A. & Spirkl, W. & Sizmann, R., 1994. "The use of parameter identification for flat-plate collector testing under non-stationary conditions," Renewable Energy, Elsevier, vol. 4(2), pages 217-222.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Fan, Wenke & Kokogiannakis, Georgios & Ma, Zhenjun, 2019. "Optimisation of life cycle performance of a double-pass photovoltaic thermal-solar air heater with heat pipes," Renewable Energy, Elsevier, vol. 138(C), pages 90-105.
    2. Choi, Hwiung & Choi, Kwanghwan, 2022. "Parametric study of a novel air-based photovoltaic-thermal collector with a transverse triangular-shaped block," Renewable Energy, Elsevier, vol. 201(P1), pages 96-110.
    3. Das, Debayan & Lukose, Leo & Basak, Tanmay, 2018. "Role of multiple solar heaters along the walls for the thermal management during natural convection in square and triangular cavities," Renewable Energy, Elsevier, vol. 121(C), pages 205-229.
    4. Golzari, Soudabeh & Kasaeian, Alibakhsh & Amidpour, Majid & Nasirivatan, Shahin & Mousavi, Soroush, 2018. "Experimental investigation of the effects of corona wind on the performance of an air-cooled PV/T," Renewable Energy, Elsevier, vol. 127(C), pages 284-297.
    5. Hu, Jianjun & Liu, Kaitong & Guo, Meng & Zhang, Guangqiu & Chu, Zhongliang & Wang, Meida, 2019. "Performance improvement of baffle-type solar air collector based on first chamber narrowing," Renewable Energy, Elsevier, vol. 135(C), pages 701-710.
    6. Franklin, J. Charles & Chandrasekar, M., 2019. "Performance enhancement of a single pass solar photovoltaic thermal system using staves in the trailing portion of the air channel," Renewable Energy, Elsevier, vol. 135(C), pages 248-258.
    7. Vittorini, Diego & Cipollone, Roberto, 2019. "Fin-cooled photovoltaic module modeling – Performances mapping and electric efficiency assessment under real operating conditions," Energy, Elsevier, vol. 167(C), pages 159-167.
    8. Byeong-Hwa An & Kwang-Hwan Choi & Hwi-Ung Choi, 2022. "Influence of Triangle-Shaped Obstacles on the Energy and Exergy Performance of an Air-Cooled Photovoltaic Thermal (PVT) Collector," Sustainability, MDPI, vol. 14(20), pages 1-19, October.
    9. Bellos, Evangelos & Tzivanidis, Christos, 2017. "Yearly performance of a hybrid PV operating with nanofluid," Renewable Energy, Elsevier, vol. 113(C), pages 867-884.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tchinda, Réné, 2009. "A review of the mathematical models for predicting solar air heaters systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(8), pages 1734-1759, October.
    2. Alam, Tabish & Kim, Man-Hoe, 2017. "Performance improvement of double-pass solar air heater – A state of art of review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 779-793.
    3. Ravi, Ravi Kant & Saini, Rajeshwer Prasad, 2016. "A review on different techniques used for performance enhancement of double pass solar air heaters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 941-952.
    4. Fan, Wenke & Kokogiannakis, Georgios & Ma, Zhenjun, 2019. "Optimisation of life cycle performance of a double-pass photovoltaic thermal-solar air heater with heat pipes," Renewable Energy, Elsevier, vol. 138(C), pages 90-105.
    5. Singh, Satyender & Dhiman, Prashant, 2016. "Thermal performance of double pass packed bed solar air heaters – A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1010-1031.
    6. Saxena, Abhishek & Varun, & El-Sebaii, A.A., 2015. "A thermodynamic review of solar air heaters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 863-890.
    7. El-Sebaii, A.A. & Al-Snani, H., 2010. "Effect of selective coating on thermal performance of flat plate solar air heaters," Energy, Elsevier, vol. 35(4), pages 1820-1828.
    8. Dhiman, Prashant & Thakur, N.S. & Kumar, Anoop & Singh, Satyender, 2011. "An analytical model to predict the thermal performance of a novel parallel flow packed bed solar air heater," Applied Energy, Elsevier, vol. 88(6), pages 2157-2167, June.
    9. Ozgen, Filiz & Esen, Mehmet & Esen, Hikmet, 2009. "Experimental investigation of thermal performance of a double-flow solar air heater having aluminium cans," Renewable Energy, Elsevier, vol. 34(11), pages 2391-2398.
    10. Oztop, Hakan F. & Bayrak, Fatih & Hepbasli, Arif, 2013. "Energetic and exergetic aspects of solar air heating (solar collector) systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 59-83.
    11. Hasan, M. Arif & Sumathy, K., 2010. "Photovoltaic thermal module concepts and their performance analysis: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1845-1859, September.
    12. Hedayatizadeh, Mahdi & Sarhaddi, Faramarz & Safavinejad, Ali & Ranjbar, Faramarz & Chaji, Hossein, 2016. "Exergy loss-based efficiency optimization of a double-pass/glazed v-corrugated plate solar air heater," Energy, Elsevier, vol. 94(C), pages 799-810.
    13. Rounis, Efstratios Dimitrios & Athienitis, Andreas & Stathopoulos, Theodore, 2021. "Review of air-based PV/T and BIPV/T systems - Performance and modelling," Renewable Energy, Elsevier, vol. 163(C), pages 1729-1753.
    14. Varun Pratap Singh & Siddharth Jain & Ashish Karn & Ashwani Kumar & Gaurav Dwivedi & Chandan Swaroop Meena & Nitesh Dutt & Aritra Ghosh, 2022. "Recent Developments and Advancements in Solar Air Heaters: A Detailed Review," Sustainability, MDPI, vol. 14(19), pages 1-55, September.
    15. Karsli, Suleyman, 2007. "Performance analysis of new-design solar air collectors for drying applications," Renewable Energy, Elsevier, vol. 32(10), pages 1645-1660.
    16. El-Sebaii, A.A. & Aboul-Enein, S. & Ramadan, M.R.I. & Shalaby, S.M. & Moharram, B.M., 2011. "Investigation of thermal performance of-double pass-flat and v-corrugated plate solar air heaters," Energy, Elsevier, vol. 36(2), pages 1076-1086.
    17. Tonui, J.K. & Tripanagnostopoulos, Y., 2007. "Improved PV/T solar collectors with heat extraction by forced or natural air circulation," Renewable Energy, Elsevier, vol. 32(4), pages 623-637.
    18. Roozbeh Vaziri & Akeem Adeyemi Oladipo & Mohsen Sharifpur & Rani Taher & Mohammad Hossein Ahmadi & Alibek Issakhov, 2021. "Efficiency Enhancement in Double-Pass Perforated Glazed Solar Air Heaters with Porous Beds: Taguchi-Artificial Neural Network Optimization and Cost–Benefit Analysis," Sustainability, MDPI, vol. 13(21), pages 1-18, October.
    19. Akpinar, Ebru Kavak & Koçyigit, Fatih, 2010. "Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates," Applied Energy, Elsevier, vol. 87(11), pages 3438-3450, November.
    20. Ibrahim, Adnan & Othman, Mohd Yusof & Ruslan, Mohd Hafidz & Mat, Sohif & Sopian, Kamaruzzaman, 2011. "Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 352-365, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:101:y:2017:i:c:p:816-834. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.