IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v215y2021ics095183202100315x.html
   My bibliography  Save this article

A novel risk evaluation method for fire and explosion accidents in oil depots using bow-tie analysis and risk matrix analysis method based on cloud model theory

Author

Listed:
  • Xie, Shuyi
  • Dong, Shaohua
  • Chen, Yinuo
  • Peng, Yujie
  • Li, Xincai

Abstract

Due to the catastrophic impact of Fire and Explosion Accidents in Oil Depots (FEAOD), the prevention and control of such accidents is the most critical part of risk management. In this study, a Bow-tie (BT) model was built for FEAOD, while a quantitative risk assessment and consequence assessment was performed in conjunction with the risk matrix. Then, due to the uncertainty and ambiguity of the probability data of Basic Events (BEs) during the expert elicitation process, this study creatively proposed a Cloud-Analytic Hierarchy Process (Cloud-AHP) algorithm and Group Cloud Decision-Making (GCDM) algorithm based on the Fuzzy Cloud Membership Function (FCMF). Finally, combined with the probability estimation algorithm and the sensitivity analysis, a novel risk quantitative assessment algorithm for a BT model was developed based on Cloud Model (CM) theory. The discretion, ambiguity, and randomness were considered during the evaluation process, and a more scientific assessment fusion result of Decision makers (DMs) was obtained, while the Delphi iteration process further reduced personal errors. A case study of an oil depot in Dalian was investigated. The results showed that the proposed method more accurately identified the weak links in the safety system, providing a theoretical basis for the risk prevention and control.

Suggested Citation

  • Xie, Shuyi & Dong, Shaohua & Chen, Yinuo & Peng, Yujie & Li, Xincai, 2021. "A novel risk evaluation method for fire and explosion accidents in oil depots using bow-tie analysis and risk matrix analysis method based on cloud model theory," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    • Handle: RePEc:eee:reensy:v:215:y:2021:i:c:s095183202100315x
    DOI: 10.1016/j.ress.2021.107791
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S095183202100315X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2021.107791?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hu, Lunhu & Kang, Rui & Pan, Xing & Zuo, Dujun, 2020. "Risk assessment of uncertain random system—Level-1 and level-2 joint propagation of uncertainty and probability in fault tree analysis," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    2. Carpitella, Silvia & Certa, Antonella & Izquierdo, Joaquín & La Fata, Concetta Manuela, 2018. "A combined multi-criteria approach to support FMECA analyses: A real-world case," Reliability Engineering and System Safety, Elsevier, vol. 169(C), pages 394-402.
    3. Langdalen, Henrik & Abrahamsen, Eirik Bjorheim & Selvik, Jon Tømmerås, 2020. "On the importance of systems thinking when using the ALARP principle for risk management," Reliability Engineering and System Safety, Elsevier, vol. 204(C).
    4. Alileche, Nassim & Cozzani, Valerio & Reniers, Genserik & Estel, Lionel, 2015. "Thresholds for domino effects and safety distances in the process industry: A review of approaches and regulations," Reliability Engineering and System Safety, Elsevier, vol. 143(C), pages 74-84.
    5. Vileiniskis, Marius & Remenyte-Prescott, Rasa, 2017. "Quantitative risk prognostics framework based on Petri Net and Bow-Tie models," Reliability Engineering and System Safety, Elsevier, vol. 165(C), pages 62-73.
    6. Zhou, Jianfeng & Reniers, Genserik, 2020. "Probabilistic Petri-net addition enabling decision making depending on situational change: The case of emergency response to fuel tank farm fire," Reliability Engineering and System Safety, Elsevier, vol. 200(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Zhichen & Li, Ying & Zhang, Zhaoyi & Yu, Wenbo, 2022. "A new evacuation accessibility analysis approach based on spatial information," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    2. Yılmaz, Emre & German, Brian J. & Pritchett, Amy R., 2023. "Optimizing resource allocations to improve system reliability via the propagation of statistical moments through fault trees," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    3. Tang, Ming & Liao, Huchang, 2021. "Failure mode and effect analysis considering the fairness-oriented consensus of a large group with core-periphery structure," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    4. Ma, Weikai & Wang, Yanfu & Xing, Peijie & Yang, Ming, 2025. "A Monte Carlo-based modeling method for the spatial-temporal evolution process of multi-hazard and higher-order domino effect," Reliability Engineering and System Safety, Elsevier, vol. 253(C).
    5. Chen, Honghao & Chen, Guohua & Xiong, Caiyi & Wu, Yue & Li, Xiaofeng & Gao, Xiaoming, 2025. "An inherent safety assessment tool for storage tank farm layout planning based on dynamic propagation modeling simulation of fire domino effects," Reliability Engineering and System Safety, Elsevier, vol. 256(C).
    6. Zhao, Yixin & Cai, Baoping & Cozzani, Valerio & Liu, Yiliu, 2025. "Failure dependence and cascading failures: A literature review and research opportunities," Reliability Engineering and System Safety, Elsevier, vol. 256(C).
    7. Zhou, Jianfeng & Reniers, Genserik, 2022. "Petri-net based cooperation modeling and time analysis of emergency response in the context of domino effect prevention in process industries," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    8. Li, Weijun & Sun, Qiqi & Zhang, Jiwang & Zhang, Laibin, 2024. "Quantitative risk assessment of industrial hot work using Adaptive Bow Tie and Petri Nets," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    9. Khakzad, Nima, 2023. "A methodology based on Dijkstra's algorithm and mathematical programming for optimal evacuation in process plants in the event of major tank fires," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    10. Zhi-Jiao Du & Zhi-Xiang Chen & Su-Min Yu, 2021. "Improved Failure Mode and Effect Analysis: Implementing Risk Assessment and Conflict Risk Mitigation with Probabilistic Linguistic Information," Mathematics, MDPI, vol. 9(11), pages 1-20, May.
    11. Hu, Xiaonong & Fang, Genshen & Yang, Jiayu & Zhao, Lin & Ge, Yaojun, 2023. "Simplified models for uncertainty quantification of extreme events using Monte Carlo technique," Reliability Engineering and System Safety, Elsevier, vol. 230(C).
    12. Ahmed, Umair & Carpitella, Silvia & Certa, Antonella, 2021. "An integrated methodological approach for optimising complex systems subjected to predictive maintenance," Reliability Engineering and System Safety, Elsevier, vol. 216(C).
    13. Jianfeng Zhou & Genserik Reniers, 2020. "Probabilistic Analysis of Domino Effects by Using a Matrix‐Based Simulation Approach," Risk Analysis, John Wiley & Sons, vol. 40(10), pages 1913-1927, October.
    14. Lo, Huai-Wei & Liou, James J.H. & Huang, Chun-Nen & Chuang, Yen-Ching, 2019. "A novel failure mode and effect analysis model for machine tool risk analysis," Reliability Engineering and System Safety, Elsevier, vol. 183(C), pages 173-183.
    15. Feng, Jian Rui & Yu, Guanghui & Zhao, Mengke & Zhang, Jiaqing & Lu, Shouxiang, 2022. "Dynamic risk assessment framework for industrial systems based on accidents chain theory: The case study of fire and explosion risk of UHV converter transformer," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    16. Tugnoli, Alessandro & Scarponi, Giordano Emrys & Antonioni, Giacomo & Cozzani, Valerio, 2022. "Quantitative assessment of domino effect and escalation scenarios caused by fragment projection," Reliability Engineering and System Safety, Elsevier, vol. 217(C).
    17. Lu, Ziqiang & Zhu, Yuanguo, 2023. "Asymptotic stability in pth moment of uncertain dynamical systems with time-delays," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 212(C), pages 323-335.
    18. Zhou, Jianfeng & Reniers, Genserik & Cozzani, Valerio, 2023. "A Petri-net approach for firefighting force allocation analysis of fire emergency response with backups," Reliability Engineering and System Safety, Elsevier, vol. 229(C).
    19. Martin Folch-Calvo & Francisco Brocal-Fernández & Cristina González-Gaya & Miguel A. Sebastián, 2020. "Analysis and Characterization of Risk Methodologies Applied to Industrial Parks," Sustainability, MDPI, vol. 12(18), pages 1-35, September.
    20. Hu, Lunhu & Pan, Xing & Kang, Rui & Chu, Jian & Gao, Yunfeng & Xue, Zhong & Baoyin, Hexi, 2024. "Dynamic risk assessment of Uncertain Random System considering operator's simple emergency-stop action in short time window," Reliability Engineering and System Safety, Elsevier, vol. 252(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:215:y:2021:i:c:s095183202100315x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.