IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v282y2025ics0925527325000374.html
   My bibliography  Save this article

Additive manufacturing scenario for automotive spare parts supply: A case study approach

Author

Listed:
  • Bade, Alexander
  • Lasch, Rainer
  • Schneider, Nick

Abstract

The rise of Industry 4.0 technologies is transforming the automotive industry. Additive manufacturing is one innovation that could prove pivotal in the automotive spare parts supply chain. On-demand production, enabled by additive manufacturing, could lead to significant cost savings by reducing inventory. The complex structure of the automotive supply chain offers many opportunities for the positioning of additive manufacturing and realizing the potential for production closer to the point of use. While several scenarios for the positioning of additive manufacturing have been proposed in the literature, there is a lack of empirical research and case studies evaluating the practicality of the scenarios. An embedded single case study was conducted with eight key informants from the automotive industry to extend the theory and examine the feasibility of the scenarios from the literature in practice. The findings suggest the implementation of additive manufacturing in a regional distribution center or outsourcing to additive manufacturing service providers. Both scenarios have shortcomings that are of practical importance. Implementing additive manufacturing in various regional distribution centers would require greater investment by the original equipment manufacturer while outsourcing to additive manufacturing service providers would entail costly certification procedures. With this in mind, a two-stage implementation scenario was developed and validated. This scenario proposes the production of spare parts in a regional distribution center or at an additive manufacturing service provider, depending on the complexity of the manufacturing process. The responsibilities of each participant in the automotive supply chain are discussed, and an exemplary process flow is presented.

Suggested Citation

  • Bade, Alexander & Lasch, Rainer & Schneider, Nick, 2025. "Additive manufacturing scenario for automotive spare parts supply: A case study approach," International Journal of Production Economics, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:proeco:v:282:y:2025:i:c:s0925527325000374
    DOI: 10.1016/j.ijpe.2025.109552
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527325000374
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2025.109552?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Glenn Parry & Jens K. Roehrich, 2009. "Towards the strategic outsourcing of core competencies in the automotive industry: threat or opportunity?," International Journal of Automotive Technology and Management, Inderscience Enterprises Ltd, vol. 9(1), pages 40-53.
    2. Bogers, Marcel & Hadar, Ronen & Bilberg, Arne, 2016. "Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing," Technological Forecasting and Social Change, Elsevier, vol. 102(C), pages 225-239.
    3. Casper Selmer Frandsen & Martin Mathias Nielsen & Atanu Chaudhuri & Jayanth Jayaram & Kannan Govindan, 2020. "In search for classification and selection of spare parts suitable for additive manufacturing: a literature review," International Journal of Production Research, Taylor & Francis Journals, vol. 58(4), pages 970-996, February.
    4. Luca Beltrametti & Angelo Gasparre, 2018. "Industrial 3D printing in Italy," International Journal of Manufacturing Technology and Management, Inderscience Enterprises Ltd, vol. 32(1), pages 43-64.
    5. Afshari, Hamid & Searcy, Cory & Jaber, Mohamad Y., 2020. "The role of eco-innovation drivers in promoting additive manufacturing in supply chains," International Journal of Production Economics, Elsevier, vol. 223(C).
    6. Bram Westerweel & Rob Basten & Jelmar den Boer & Geert‐Jan van Houtum, 2021. "Printing Spare Parts at Remote Locations: Fulfilling the Promise of Additive Manufacturing," Production and Operations Management, Production and Operations Management Society, vol. 30(6), pages 1615-1632, June.
    7. Chan, Hing Kai & Griffin, James & Lim, Jia Jia & Zeng, Fangli & Chiu, Anthony S.F., 2018. "The impact of 3D Printing Technology on the supply chain: Manufacturing and legal perspectives," International Journal of Production Economics, Elsevier, vol. 205(C), pages 156-162.
    8. Dmitry Ivanov & Alexandre Dolgui & Boris Sokolov, 2019. "The impact of digital technology and Industry 4.0 on the ripple effect and supply chain risk analytics," International Journal of Production Research, Taylor & Francis Journals, vol. 57(3), pages 829-846, February.
    9. Delic, Mia & Eyers, Daniel R., 2020. "The effect of additive manufacturing adoption on supply chain flexibility and performance: An empirical analysis from the automotive industry," International Journal of Production Economics, Elsevier, vol. 228(C).
    10. Yao Li & Guozhu Jia & Yang Cheng & Yuchen Hu, 2017. "Additive manufacturing technology in spare parts supply chain: a comparative study," International Journal of Production Research, Taylor & Francis Journals, vol. 55(5), pages 1498-1515, March.
    11. Karl Inderfurth & Kampan Mukherjee, 2008. "Decision support for spare parts acquisition in post product life cycle," Central European Journal of Operations Research, Springer;Slovak Society for Operations Research;Hungarian Operational Research Society;Czech Society for Operations Research;Österr. Gesellschaft für Operations Research (ÖGOR);Slovenian Society Informatika - Section for Operational Research;Croatian Operational Research Society, vol. 16(1), pages 17-42, March.
    12. Thun, Jörn-Henrik & Hoenig, Daniel, 2011. "An empirical analysis of supply chain risk management in the German automotive industry," International Journal of Production Economics, Elsevier, vol. 131(1), pages 242-249, May.
    13. Binoy Debnath & Md Shihab Shakur & Fahmida Tanjum & M. Azizur Rahman & Ziaul Haq Adnan, 2022. "Impact of Additive Manufacturing on the Supply Chain of Aerospace Spare Parts Industry—A Review," Logistics, MDPI, vol. 6(2), pages 1-25, April.
    14. Mia Delic & Blazenka Knezevic & Petra Skrobot, 2017. "Additive Manufacturing Technologies Adoption In Automotive Supply Chains – The Theoretical Review," Business Logistics in Modern Management, Josip Juraj Strossmayer University of Osijek, Faculty of Economics, Croatia, vol. 17, pages 421-436.
    15. Collins, Robert & Bechler, Kimberly & Pires, Silvio, 1997. "Outsourcing in the automotive industry: From JIT to Modular Consortia," European Management Journal, Elsevier, vol. 15(5), pages 498-508, October.
    16. Beltagui, Ahmad & Gold, Stefan & Kunz, Nathan & Reiner, Gerald, 2023. "Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution," International Journal of Production Economics, Elsevier, vol. 255(C).
    17. Luis Isasi-Sanchez & Jesus Morcillo-Bellido & Jose Ignacio Ortiz-Gonzalez & Alfonso Duran-Heras, 2020. "Synergic Sustainability Implications of Additive Manufacturing in Automotive Spare Parts: A Case Analysis," Sustainability, MDPI, vol. 12(20), pages 1-18, October.
    18. Thomas-Seale, L.E.J. & Kirkman-Brown, J.C. & Attallah, M.M. & Espino, D.M. & Shepherd, D.E.T., 2018. "The barriers to the progression of additive manufacture: Perspectives from UK industry," International Journal of Production Economics, Elsevier, vol. 198(C), pages 104-118.
    19. Greg Guest & Emily Namey & Mario Chen, 2020. "A simple method to assess and report thematic saturation in qualitative research," PLOS ONE, Public Library of Science, vol. 15(5), pages 1-17, May.
    20. Marco Savastano & Carlo Amendola & Fabrizio D′Ascenzo & Enrico Massaroni, 2016. "3-D Printing in the Spare Parts Supply Chain: An Explorative Study in the Automotive Industry," Lecture Notes in Information Systems and Organization, in: Leonardo Caporarello & Fabrizio Cesaroni & Raphael Giesecke & Michele Missikoff (ed.), Digitally Supported Innovation, pages 153-170, Springer.
    21. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    22. Attaran, Mohsen, 2017. "The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing," Business Horizons, Elsevier, vol. 60(5), pages 677-688.
    23. Sgarbossa, Fabio & Peron, Mirco & Lolli, Francesco & Balugani, Elia, 2021. "Conventional or additive manufacturing for spare parts management: An extensive comparison for Poisson demand," International Journal of Production Economics, Elsevier, vol. 233(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Naghshineh, Bardia & Carvalho, Helena, 2022. "The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review," International Journal of Production Economics, Elsevier, vol. 247(C).
    2. Marić, Josip & Opazo-Basáez, Marco & Vlačić, Božidar & Dabić, Marina, 2023. "Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams," Technological Forecasting and Social Change, Elsevier, vol. 193(C).
    3. Hettiarachchi, Biman Darshana & Brandenburg, Marcus & Seuring, Stefan, 2022. "Connecting additive manufacturing to circular economy implementation strategies: Links, contingencies and causal loops," International Journal of Production Economics, Elsevier, vol. 246(C).
    4. Foshammer, Jeppe & Søberg, Peder Veng & Helo, Petri & Ituarte, Iñigo Flores, 2022. "Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach," International Journal of Production Economics, Elsevier, vol. 253(C).
    5. Matthias M. Meyer & Andreas H. Glas & Michael Eßig, 2021. "Systematic review of sourcing and 3D printing: make-or-buy decisions in industrial buyer–supplier relationships," Management Review Quarterly, Springer, vol. 71(4), pages 723-752, October.
    6. Shubhendu Singh & Subhas Chandra Misra & Gaurvendra Singh, 2024. "Leveraging Additive Manufacturing for Enhanced Supply Chain Resilience and Sustainability: A Strategic Integration Framework," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 25(2), pages 343-368, June.
    7. Basu R, Jothi & Abdulrahman, Muhammad D. & Yuvaraj, M., 2023. "Improving agility and resilience of automotive spares supply chain: The additive manufacturing enabled truck model," Socio-Economic Planning Sciences, Elsevier, vol. 85(C).
    8. Jaya Priyadarshini & Rajesh Kr Singh & Ruchi Mishra & Surajit Bag, 2022. "Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach," Operations Management Research, Springer, vol. 15(1), pages 567-588, June.
    9. Shivam Gupta & Sachin Modgil & Piera Centobelli & Roberto Cerchione & Serena Strazzullo, 2022. "Additive Manufacturing and Green Information Systems as Technological Capabilities for Firm Performance," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 23(4), pages 515-534, December.
    10. Belhadi, Amine & Kamble, Sachin S. & Venkatesh, Mani & Chiappetta Jabbour, Charbel Jose & Benkhati, Imane, 2022. "Building supply chain resilience and efficiency through additive manufacturing: An ambidextrous perspective on the dynamic capability view," International Journal of Production Economics, Elsevier, vol. 249(C).
    11. Sun, Luoyi & Hua, Guowei & Cheng, T.C.E. & Wang, Yixiao, 2020. "How to price 3D-printed products? Pricing strategy for 3D printing platforms," International Journal of Production Economics, Elsevier, vol. 226(C).
    12. Beltagui, Ahmad & Kunz, Nathan & Gold, Stefan, 2020. "The role of 3D printing and open design on adoption of socially sustainable supply chain innovation," International Journal of Production Economics, Elsevier, vol. 221(C).
    13. Jose M. Framinan & Paz Perez-Gonzalez & Victor Fernandez-Viagas, 2023. "An overview on the use of operations research in additive manufacturing," Annals of Operations Research, Springer, vol. 322(1), pages 5-40, March.
    14. Diri Kenger, Zülal & Koç, Çağrı & Özceylan, Eren, 2021. "Integrated disassembly line balancing and routing problem with mobile additive manufacturing," International Journal of Production Economics, Elsevier, vol. 235(C).
    15. Li, Wei & Sun, Hui & Tong, Meng & Mustafee, Navonil & Koh, Lenny, 2024. "Customizing customization in a 3D printing-enabled hybrid manufacturing supply chain," International Journal of Production Economics, Elsevier, vol. 268(C).
    16. Turkcan, Hulya & Imamoglu, Salih Zeki & Ince, Huseyin, 2022. "To be more innovative and more competitive in dynamic environments: The role of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 246(C).
    17. Nazanin Hosseini Arian & Alireza Pooya & Fariborz Rahimnia & Ali Sibevei, 2021. "Assessment the effect of rapid prototyping implementation on supply chain sustainability: a system dynamics approach," Operations Management Research, Springer, vol. 14(3), pages 467-493, December.
    18. Caviggioli, Federico & Ughetto, Elisa, 2019. "A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society," International Journal of Production Economics, Elsevier, vol. 208(C), pages 254-268.
    19. Holzmann, Patrick & Breitenecker, Robert J. & Schwarz, Erich J. & Gregori, Patrick, 2020. "Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers," Technological Forecasting and Social Change, Elsevier, vol. 159(C).
    20. Amine Belhadi & Sachin S. Kamble & Venkatesh Mani & Charbel Jose Chiappetta Jabbour & Imane Benkhati, 2022. "Building supply chain resilience and efficiency through additive manufacturing : An ambidextrous perspective on the dynamic capability view," Post-Print hal-04325568, HAL.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:282:y:2025:i:c:s0925527325000374. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.