IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v87y2015icp270-278.html
   My bibliography  Save this article

Absorption characteristics of falling film LiBr (lithium bromide) solution over a finned structure

Author

Listed:
  • Mortazavi, Mehdi
  • Nasr Isfahani, Rasool
  • Bigham, Sajjad
  • Moghaddam, Saeed

Abstract

In this study, an absorber design suitable for the plate-and-frame absorber configuration is introduced. The design utilizes a fin structure installed on a vertical flat plate to produce a uniform solution film and minimize its thickness and to continuously interrupt the boundary layer. Using numerical models supported by experiments employing dye visualization, the suitable fin spacing and size and surface wettability are determined. The solution flow thickness is measured using the laser confocal displacement measurement technique. The new surface structure is tested in an experimental absorption system. A significantly high absorption rate (6 × 10−3 kg/m2s at a pressure potential of 700 Pa) is achieved in comparison with the conventional absorption systems. The effect of absorber water vapor pressure, solution flow rate, solution inlet concentration, cooling water inlet temperature and solution inlet temperature on the absorption rate is investigated. The proposed design provides a potential framework for development of highly compact absorption refrigeration systems.

Suggested Citation

  • Mortazavi, Mehdi & Nasr Isfahani, Rasool & Bigham, Sajjad & Moghaddam, Saeed, 2015. "Absorption characteristics of falling film LiBr (lithium bromide) solution over a finned structure," Energy, Elsevier, vol. 87(C), pages 270-278.
    • Handle: RePEc:eee:energy:v:87:y:2015:i:c:p:270-278
    DOI: 10.1016/j.energy.2015.04.074
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215005290
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.04.074?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ali, Ahmed Hamza H., 2010. "Design of a compact absorber with a hydrophobic membrane contactor at the liquid-vapor interface for lithium bromide-water absorption chillers," Applied Energy, Elsevier, vol. 87(4), pages 1112-1121, April.
    2. Kaynakli, O., 2008. "The first and second law analysis of a lithium bromide/water coil absorber," Energy, Elsevier, vol. 33(5), pages 804-816.
    3. Bigham, Sajjad & Yu, Dazhi & Chugh, Devesh & Moghaddam, Saeed, 2014. "Moving beyond the limits of mass transport in liquid absorbent microfilms through the implementation of surface-induced vortices," Energy, Elsevier, vol. 65(C), pages 621-630.
    4. Palacios, E. & Izquierdo, M. & Marcos, J.D. & Lizarte, R., 2009. "Evaluation of mass absorption in LiBr flat-fan sheets," Applied Energy, Elsevier, vol. 86(12), pages 2574-2582, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lu, Hao & Lu, Lin & Luo, Yimo & Qi, Ronghui, 2016. "Investigation on the dynamic characteristics of the counter-current flow for liquid desiccant dehumidification," Energy, Elsevier, vol. 101(C), pages 229-238.
    2. Wen, Tao & Lu, Lin & Dong, Chuanshuai & Luo, Yimo, 2018. "Development and experimental study of a novel plate dehumidifier made of anodized aluminum," Energy, Elsevier, vol. 144(C), pages 169-177.
    3. Sui, Zengguang & Wu, Wei, 2023. "AI-assisted maldistribution minimization of membrane-based heat/mass exchangers for compact absorption cooling," Energy, Elsevier, vol. 263(PC).
    4. Chugh, Devesh & Gluesenkamp, Kyle & Abdelaziz, Omar & Moghaddam, Saeed, 2017. "Ionic liquid-based hybrid absorption cycle for water heating, dehumidification, and cooling," Applied Energy, Elsevier, vol. 202(C), pages 746-754.
    5. Cola, Fabrizio & Hey, Jonathan & Romagnoli, Alessandro, 2018. "Characterization of the droplet formation phase for the H2OLiBr absorber: An analytical and experimental analysis," Applied Energy, Elsevier, vol. 222(C), pages 885-897.
    6. Sehgal, Shitiz & Alvarado, Jorge L. & Hassan, Ibrahim G. & Kadam, Sambhaji T., 2021. "A comprehensive review of recent developments in falling-film, spray, bubble and microchannel absorbers for absorption systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 142(C).
    7. Amaris, Carlos & Vallès, Manel & Bourouis, Mahmoud, 2018. "Vapour absorption enhancement using passive techniques for absorption cooling/heating technologies: A review," Applied Energy, Elsevier, vol. 231(C), pages 826-853.
    8. Wu, Wei & Ran, Siyuan & Shi, Wenxing & Wang, Baolong & Li, Xianting, 2016. "NH3-H2O water source absorption heat pump (WSAHP) for low temperature heating: Experimental investigation on the off-design performance," Energy, Elsevier, vol. 115(P1), pages 697-710.
    9. Mortazavi, Mehdi & Schmid, Michael & Moghaddam, Saeed, 2017. "Compact and efficient generator for low grade solar and waste heat driven absorption systems," Applied Energy, Elsevier, vol. 198(C), pages 173-179.
    10. Wen, Tao & Lu, Lin, 2019. "A review of correlations and enhancement approaches for heat and mass transfer in liquid desiccant dehumidification system," Applied Energy, Elsevier, vol. 239(C), pages 757-784.
    11. Michel, Benoit & Le Pierrès, Nolwenn & Stutz, Benoit, 2017. "Performances of grooved plates falling film absorber," Energy, Elsevier, vol. 138(C), pages 103-117.
    12. Wen, Tao & Lu, Lin & Li, Mai & Zhong, Hong, 2018. "Comparative study of the regeneration characteristics of LiCl and a new mixed liquid desiccant solution," Energy, Elsevier, vol. 163(C), pages 992-1005.
    13. Chugh, Devesh & Gluesenkamp, Kyle R. & Abu-Heiba, Ahmad & Alipanah, Morteza & Fazeli, Abdy & Rode, Richard & Schmid, Michael & Patel, Viral K. & Moghaddam, Saeed, 2019. "Experimental evaluation of a semi-open membrane-based absorption heat pump system utilizing ionic liquids," Applied Energy, Elsevier, vol. 239(C), pages 919-927.
    14. Gluesenkamp, Kyle R. & Chugh, Devesh & Abdelaziz, Omar & Moghaddam, Saeed, 2017. "Efficiency analysis of semi-open sorption heat pump systems," Renewable Energy, Elsevier, vol. 110(C), pages 95-104.
    15. Zhang, Hao & Lai, Yanhua & Yang, Xiao & Li, Chang & Dong, Yong, 2022. "Non-evaporative solvent extraction technology applied to water and heat recovery from low-temperature flue gas: Parametric analysis and feasibility evaluation," Energy, Elsevier, vol. 244(PB).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Cola, Fabrizio & Hey, Jonathan & Romagnoli, Alessandro, 2018. "Characterization of the droplet formation phase for the H2OLiBr absorber: An analytical and experimental analysis," Applied Energy, Elsevier, vol. 222(C), pages 885-897.
    2. Asfand, Faisal & Bourouis, Mahmoud, 2015. "A review of membrane contactors applied in absorption refrigeration systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 45(C), pages 173-191.
    3. Amaris, Carlos & Vallès, Manel & Bourouis, Mahmoud, 2018. "Vapour absorption enhancement using passive techniques for absorption cooling/heating technologies: A review," Applied Energy, Elsevier, vol. 231(C), pages 826-853.
    4. Mortazavi, Mehdi & Schmid, Michael & Moghaddam, Saeed, 2017. "Compact and efficient generator for low grade solar and waste heat driven absorption systems," Applied Energy, Elsevier, vol. 198(C), pages 173-179.
    5. Venegas, M. & de Vega, M. & García-Hernando, N. & Ruiz-Rivas, U., 2017. "Adiabatic vs non-adiabatic membrane-based rectangular micro-absorbers for H2O-LiBr absorption chillers," Energy, Elsevier, vol. 134(C), pages 757-766.
    6. Asfand, Faisal & Stiriba, Youssef & Bourouis, Mahmoud, 2015. "CFD simulation to investigate heat and mass transfer processes in a membrane-based absorber for water-LiBr absorption cooling systems," Energy, Elsevier, vol. 91(C), pages 517-530.
    7. Sui, Zengguang & Zhai, Chong & Wu, Wei, 2022. "Parametric and comparative study on enhanced microchannel membrane-based absorber structures for compact absorption refrigeration," Renewable Energy, Elsevier, vol. 187(C), pages 109-122.
    8. Zhai, Chong & Wu, Wei, 2022. "Energetic, exergetic, economic, and environmental analysis of microchannel membrane-based absorption refrigeration system driven by various energy sources," Energy, Elsevier, vol. 239(PB).
    9. Sui, Zengguang & Sui, Yunren & Wu, Wei, 2022. "Multi-objective optimization of a microchannel membrane-based absorber with inclined grooves based on CFD and machine learning," Energy, Elsevier, vol. 240(C).
    10. González-Gil, A. & Izquierdo, M. & Marcos, J.D. & Palacios, E., 2012. "New flat-fan sheets adiabatic absorber for direct air-cooled LiBr/H2O absorption machines: Simulation, parametric study and experimental results," Applied Energy, Elsevier, vol. 98(C), pages 162-173.
    11. Zhai, Chong & Wu, Wei & Coronas, Alberto, 2021. "Membrane-based absorption cooling and heating: Development and perspectives," Renewable Energy, Elsevier, vol. 177(C), pages 663-688.
    12. Nasr Isfahani, Rasool & Bigham, Sajjad & Mortazavi, Mehdi & Wei, Xing & Moghaddam, Saeed, 2015. "Impact of micromixing on performance of a membrane-based absorber," Energy, Elsevier, vol. 90(P1), pages 997-1004.
    13. Venegas, M. & de Vega, M. & García-Hernando, N. & Ruiz-Rivas, U., 2016. "A simple model to predict the performance of a H2O–LiBr absorber operating with a microporous membrane," Energy, Elsevier, vol. 96(C), pages 383-393.
    14. Michel, Benoit & Le Pierrès, Nolwenn & Stutz, Benoit, 2017. "Performances of grooved plates falling film absorber," Energy, Elsevier, vol. 138(C), pages 103-117.
    15. Zhai, Chong & Wu, Wei, 2021. "Performance optimization and comparison towards compact and efficient absorption refrigeration system with conventional and emerging absorbers/desorbers," Energy, Elsevier, vol. 229(C).
    16. Yılmaz, İbrahim Halil & Saka, Kenan & Kaynakli, Omer, 2016. "A thermodynamic evaluation on high pressure condenser of double effect absorption refrigeration system," Energy, Elsevier, vol. 113(C), pages 1031-1041.
    17. Izquierdo, M. & González-Gil, A. & Palacios, E., 2014. "Solar-powered single-and double-effect directly air-cooled LiBr–H2O absorption prototype built as a single unit," Applied Energy, Elsevier, vol. 130(C), pages 7-19.
    18. Balghouthi, M. & Chahbani, M.H. & Guizani, A., 2012. "Investigation of a solar cooling installation in Tunisia," Applied Energy, Elsevier, vol. 98(C), pages 138-148.
    19. Privat, Romain & Qian, Jun-Wei & Alonso, Dominique & Jaubert, Jean-Noël, 2013. "Quest for an efficient binary working mixture for an absorption-demixing heat transformer," Energy, Elsevier, vol. 55(C), pages 594-609.
    20. Chugh, Devesh & Gluesenkamp, Kyle & Abdelaziz, Omar & Moghaddam, Saeed, 2017. "Ionic liquid-based hybrid absorption cycle for water heating, dehumidification, and cooling," Applied Energy, Elsevier, vol. 202(C), pages 746-754.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:87:y:2015:i:c:p:270-278. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.