IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v44y2012i1p11-19.html
   My bibliography  Save this article

Process integration of low grade heat in process industry with district heating networks

Author

Listed:
  • Kapil, Ankur
  • Bulatov, Igor
  • Smith, Robin
  • Kim, Jin-Kuk

Abstract

A large amount of low grade energy is often wasted without heat recovery in the process industry. Over-the-fence heat integration for district heating (DH) can be suggested to utilize this waste heat and therefore alleviate the carbon footprint of the integrated energy system. The economic performance of over-the-fence process integration depends on the cost of fuel, electricity and distance for the transfer of waste heat to DH network. A new design methodology has been developed to systematically evaluate the economic benefit of integration of low grade heat with local DH networks. A site-wide analysis tool using site composite profiles is incorporated in the developed design method in order to identify the quality and quantity of low grade heat available from the site. The optimization framework developed identifies economically acceptable distance for the over-the-fence heat recovery from the industrial site to local community, subject to economic parameters and engineering constraints. A case study has been carried out to demonstrate the design methodology, and the results from the case study illustrate techno-economic and engineering barriers in practice for the implementation of low grade heat recovery beyond the site.

Suggested Citation

  • Kapil, Ankur & Bulatov, Igor & Smith, Robin & Kim, Jin-Kuk, 2012. "Process integration of low grade heat in process industry with district heating networks," Energy, Elsevier, vol. 44(1), pages 11-19.
    • Handle: RePEc:eee:energy:v:44:y:2012:i:1:p:11-19
    DOI: 10.1016/j.energy.2011.12.015
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211008097
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.12.015?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Perry, Simon & Klemeš, Jiří & Bulatov, Igor, 2008. "Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors," Energy, Elsevier, vol. 33(10), pages 1489-1497.
    2. McKenna, R.C. & Norman, J.B., 2010. "Spatial modelling of industrial heat loads and recovery potentials in the UK," Energy Policy, Elsevier, vol. 38(10), pages 5878-5891, October.
    3. Dalla Rosa, A. & Christensen, J.E., 2011. "Low-energy district heating in energy-efficient building areas," Energy, Elsevier, vol. 36(12), pages 6890-6899.
    4. Weber, C. & Shah, N., 2011. "Optimisation based design of a district energy system for an eco-town in the United Kingdom," Energy, Elsevier, vol. 36(2), pages 1292-1308.
    5. Svensson, Inger-Lise & Jönsson, Johanna & Berntsson, Thore & Moshfegh, Bahram, 2008. "Excess heat from kraft pulp mills: Trade-offs between internal and external use in the case of Sweden--Part 1: Methodology," Energy Policy, Elsevier, vol. 36(11), pages 4178-4185, November.
    6. Jönsson, Johanna & Svensson, Inger-Lise & Berntsson, Thore & Moshfegh, Bahram, 2008. "Excess heat from kraft pulp mills: Trade-offs between internal and external use in the case of Sweden--Part 2: Results for future energy market scenarios," Energy Policy, Elsevier, vol. 36(11), pages 4186-4197, November.
    7. Ajah, A.N. & Mesbah, A. & Grievink, J. & Herder, P.M. & Falcao, P.W. & Wennekes, S., 2008. "On the robustness, effectiveness and reliability of chemical and mechanical heat pumps for low-temperature heat source district heating: A comparative simulation-based analysis and evaluation," Energy, Elsevier, vol. 33(6), pages 908-929.
    8. Holmgren, Kristina, 2006. "Role of a district-heating network as a user of waste-heat supply from various sources - the case of Göteborg," Applied Energy, Elsevier, vol. 83(12), pages 1351-1367, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Lygnerud, Kristina & Werner, Sven, 2018. "Risk assessment of industrial excess heat recovery in district heating systems," Energy, Elsevier, vol. 151(C), pages 430-441.
    2. Bertrand, Alexandre & Mian, Alberto & Kantor, Ivan & Aggoune, Riad & Maréchal, François, 2019. "Regional waste heat valorisation: A mixed integer linear programming method for energy service companies," Energy, Elsevier, vol. 167(C), pages 454-468.
    3. Kavvadias, Konstantinos C. & Quoilin, Sylvain, 2018. "Exploiting waste heat potential by long distance heat transmission: Design considerations and techno-economic assessment," Applied Energy, Elsevier, vol. 216(C), pages 452-465.
    4. Morandin, Matteo & Hackl, Roman & Harvey, Simon, 2014. "Economic feasibility of district heating delivery from industrial excess heat: A case study of a Swedish petrochemical cluster," Energy, Elsevier, vol. 65(C), pages 209-220.
    5. Karner, Katharina & Theissing, Matthias & Kienberger, Thomas, 2017. "Modeling of energy efficiency increase of urban areas through synergies with industries," Energy, Elsevier, vol. 136(C), pages 201-209.
    6. Werner, Sven, 2017. "District heating and cooling in Sweden," Energy, Elsevier, vol. 126(C), pages 419-429.
    7. Hafezi, Reza & Akhavan, AmirNaser & Pakseresht, Saeed & Wood, David A., 2019. "A Layered Uncertainties Scenario Synthesizing (LUSS) model applied to evaluate multiple potential long-run outcomes for Iran's natural gas exports," Energy, Elsevier, vol. 169(C), pages 646-659.
    8. Emanuele Bonamente & Lara Pelliccia & Maria Cleofe Merico & Sara Rinaldi & Alessandro Petrozzi, 2015. "The Multifunctional Environmental Energy Tower: Carbon Footprint and Land Use Analysis of an Integrated Renewable Energy Plant," Sustainability, MDPI, vol. 7(10), pages 1-21, October.
    9. Abraham Castro Garcia & Shuo Cheng & Jeffrey S. Cross, 2020. "Solvolysis of Kraft Lignin to Bio-Oil: A Critical Review," Clean Technol., MDPI, vol. 2(4), pages 1-16, December.
    10. Svensson, Elin & Berntsson, Thore & Strömberg, Ann-Brith, 2009. "Benefits of using an optimization methodology for identifying robust process integration investments under uncertainty--A pulp mill example," Energy Policy, Elsevier, vol. 37(3), pages 813-824, March.
    11. Mengting Jiang & Camilo Rindt & David M. J. Smeulders, 2022. "Optimal Planning of Future District Heating Systems—A Review," Energies, MDPI, vol. 15(19), pages 1-38, September.
    12. Sanaei, Sayyed Mohammad & Nakata, Toshihiko, 2012. "Optimum design of district heating: Application of a novel methodology for improved design of community scale integrated energy systems," Energy, Elsevier, vol. 38(1), pages 190-204.
    13. Dénarié, A. & Muscherà, M. & Calderoni, M. & Motta, M., 2019. "Industrial excess heat recovery in district heating: Data assessment methodology and application to a real case study in Milano, Italy," Energy, Elsevier, vol. 166(C), pages 170-182.
    14. Shin Fujii & Takaaki Furubayashi & Toshihiko Nakata, 2019. "Design and Analysis of District Heating Systems Utilizing Excess Heat in Japan," Energies, MDPI, vol. 12(7), pages 1-14, March.
    15. Wetterlund, Elisabeth & Söderström, Mats, 2010. "Biomass gasification in district heating systems - The effect of economic energy policies," Applied Energy, Elsevier, vol. 87(9), pages 2914-2922, September.
    16. Blarke, Morten B. & Dotzauer, Erik, 2011. "Intermittency-friendly and high-efficiency cogeneration: Operational optimisation of cogeneration with compression heat pump, flue gas heat recovery, and intermediate cold storage," Energy, Elsevier, vol. 36(12), pages 6867-6878.
    17. Kiraly, Annamaria & Pahor, Bojan & Kravanja, Zdravko, 2013. "Achieving energy self-sufficiency by integrating renewables into companies' supply networks," Energy, Elsevier, vol. 55(C), pages 46-57.
    18. Broberg, Sarah & Backlund, Sandra & Karlsson, Magnus & Thollander, Patrik, 2012. "Industrial excess heat deliveries to Swedish district heating networks: Drop it like it's hot," Energy Policy, Elsevier, vol. 51(C), pages 332-339.
    19. Ahmed, Asim & Mancarella, Pierluigi, 2014. "Strategic techno-economic assessment of heat network options for distributed energy systems in the UK," Energy, Elsevier, vol. 75(C), pages 182-193.
    20. Jie, Pengfei & Kong, Xiangfei & Rong, Xian & Xie, Shangqun, 2016. "Selecting the optimum pressure drop per unit length of district heating piping network based on operating strategies," Applied Energy, Elsevier, vol. 177(C), pages 341-353.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:44:y:2012:i:1:p:11-19. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.