IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v32y2007i11p2110-2120.html
   My bibliography  Save this article

Exergy transfer effectiveness on heat exchanger for finite pressure drop

Author

Listed:
  • Wu, Shuang-Ying
  • Yuan, Xiao-Feng
  • Li, You-Rong
  • Xiao, Lan

Abstract

In this paper, exergy transfer effectiveness is defined to describe the performance of heat exchangers operating above/below the surrounding temperature with/without finite pressure drop. It is discussed systemically that the effects of heat transfer units number, the ratio of the heat capacity of cold fluids to that of hot fluids and flow patterns on exergy transfer effectiveness of heat exchangers. Furthermore, the results of exergy transfer effectiveness with a finite pressure drop are compared with those without pressure drop when different objective media, such as ideal gas and incompressible liquid, etc. are applied. The detailed comparisons of the exergy transfer effectiveness with heat transfer effectiveness are also performed for the parallel flow, counter flow and cross flow heat exchangers operating above/below the surrounding temperature.

Suggested Citation

  • Wu, Shuang-Ying & Yuan, Xiao-Feng & Li, You-Rong & Xiao, Lan, 2007. "Exergy transfer effectiveness on heat exchanger for finite pressure drop," Energy, Elsevier, vol. 32(11), pages 2110-2120.
    • Handle: RePEc:eee:energy:v:32:y:2007:i:11:p:2110-2120
    DOI: 10.1016/j.energy.2007.04.010
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054420700076X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2007.04.010?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. San, Jung-Yang & Jan, Chin-Lon, 2000. "Second-law analysis of a wet crossflow heat exchanger," Energy, Elsevier, vol. 25(10), pages 939-955.
    2. Boyd, J.M. & Bluemel, V. & Keil, T.H. & Kucinkas, G.R. & Molinari, S., 1981. "The second law of thermodynamics as a criterion for heat exchanger design," Energy, Elsevier, vol. 6(7), pages 603-609.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Colmenar-Santos, Antonio & Zarzuelo-Puch, Gloria & Borge-Diez, David & García-Diéguez, Concepción, 2016. "Thermodynamic and exergoeconomic analysis of energy recovery system of biogas from a wastewater treatment plant and use in a Stirling engine," Renewable Energy, Elsevier, vol. 88(C), pages 171-184.
    2. Perdomo-Hurtado, Luis & Rincón Tabares, Juan Sebastián & Correa, Danahe Marmolejo & Perdomo, Felipe A., 2017. "Castor oil preheater selection based on entropy generation and exergy effectiveness criteria," Energy, Elsevier, vol. 120(C), pages 805-815.
    3. Cuce, Pinar Mert & Riffat, Saffa, 2015. "A comprehensive review of heat recovery systems for building applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 47(C), pages 665-682.
    4. Kotcioglu, Isak & Caliskan, Sinan & Cansiz, Ahmet & Baskaya, Senol, 2010. "Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator," Energy, Elsevier, vol. 35(9), pages 3686-3695.
    5. Sun, Wei & Cheng, Qinglin & Li, Zhidong & Wang, Zhihua & Gan, Yifan & Liu, Yang & Shao, Shuai, 2019. "Study on Coil Optimization on the Basis of Heating Effect and Effective Energy Evaluation during Oil Storage Process," Energy, Elsevier, vol. 185(C), pages 505-520.
    6. Wang, Chaoyang & Liu, Ming & Zhao, Yongliang & Wang, Zhu & Yan, Junjie, 2018. "Thermodynamics analysis on a heat exchanger unit during the transient processes based on the second law," Energy, Elsevier, vol. 165(PB), pages 622-633.
    7. Gakkhar, Nikhil & Soni, M.S. & Jakhar, Sanjeev, 2016. "Second law thermodynamic study of solar assisted distillation system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 519-535.
    8. San, J.-Y., 2010. "Second-law performance of heat exchangers for waste heat recovery," Energy, Elsevier, vol. 35(5), pages 1936-1945.
    9. Azad, Abazar Vahdat & Amidpour, Majid, 2011. "Economic optimization of shell and tube heat exchanger based on constructal theory," Energy, Elsevier, vol. 36(2), pages 1087-1096.
    10. Li, You-Rong & Du, Mei-Tang & Wu, Shuang-Ying & Peng, Lan & Liu, Chao, 2012. "Exergoeconomic analysis and optimization of a condenser for a binary mixture of vapors in organic Rankine cycle," Energy, Elsevier, vol. 40(1), pages 341-347.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Heidar Sadeghzadeh & Mehdi Aliehyaei & Marc A. Rosen, 2015. "Optimization of a Finned Shell and Tube Heat Exchanger Using a Multi-Objective Optimization Genetic Algorithm," Sustainability, MDPI, vol. 7(9), pages 1-17, August.
    2. San, J.-Y., 2010. "Second-law performance of heat exchangers for waste heat recovery," Energy, Elsevier, vol. 35(5), pages 1936-1945.
    3. R. Adamovský & D. Adamovský & D. Herák, 2004. "Exergy of heat flows of the air-to-air plate heat exchanger," Research in Agricultural Engineering, Czech Academy of Agricultural Sciences, vol. 50(4), pages 130-135.
    4. Manjunath, K. & Kaushik, S.C., 2014. "Second law thermodynamic study of heat exchangers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 348-374.
    5. Kotcioglu, Isak & Caliskan, Sinan & Cansiz, Ahmet & Baskaya, Senol, 2010. "Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator," Energy, Elsevier, vol. 35(9), pages 3686-3695.
    6. Ge, T.S. & Dai, Y.J. & Wang, R.Z. & Peng, Z.Z., 2010. "Experimental comparison and analysis on silica gel and polymer coated fin-tube heat exchangers," Energy, Elsevier, vol. 35(7), pages 2893-2900.
    7. Azad, Abazar Vahdat & Amidpour, Majid, 2011. "Economic optimization of shell and tube heat exchanger based on constructal theory," Energy, Elsevier, vol. 36(2), pages 1087-1096.
    8. Liang, Cai-Hang & Zhang, Li-Zhi & Pei, Li-Xia, 2010. "Performance analysis of a direct expansion air dehumidification system combined with membrane-based total heat recovery," Energy, Elsevier, vol. 35(9), pages 3891-3901.
    9. Tugrul Ogulata, R., 2004. "Utilization of waste-heat recovery in textile drying," Applied Energy, Elsevier, vol. 79(1), pages 41-49, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:32:y:2007:i:11:p:2110-2120. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.