IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v303y2024ics0360544224017791.html

Experimental research on high-temperature radiation characteristics of film-cooled plate of gas turbines

Author

Listed:
  • Wang, Meng
  • Li, Haiwang
  • You, Ruquan
  • Kong, Weidi
  • Tao, Zhi

Abstract

With the rise in pre-turbine temperature and advancements in cooling technology, the temperature gap between the hot-gas and the blades increases. This phenomenon accentuates the significance of high-temperature radiation. However, the relevant experiments available to provide quantitative assessments of radiation are limited because of the challenging task of designing, constructing, and operating a high-temperature radiation facility. In this study, a high-temperature radiation facility is constructed to study the measurement method of evaluating radiation. The radiative heat flux of film-cooled plate of gas turbines are quantified successfully through the presented infrared-thermocouple dual reference body measurement and regression technique based on thermocouple data. The two proposed methodologies can pave the way for novel research avenues in evaluating radiation of the guide vanes. It is found that the proportion of radiation to total heat flux decreases gradually as the wall temperature increases. When the mainstream temperature is 912 K and the coolant temperature is 303 K, the radiation constitutes 50 % of the total heat flux.

Suggested Citation

  • Wang, Meng & Li, Haiwang & You, Ruquan & Kong, Weidi & Tao, Zhi, 2024. "Experimental research on high-temperature radiation characteristics of film-cooled plate of gas turbines," Energy, Elsevier, vol. 303(C).
    • Handle: RePEc:eee:energy:v:303:y:2024:i:c:s0360544224017791
    DOI: 10.1016/j.energy.2024.132005
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224017791
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.132005?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Zhiduo & Feng, Zhenping & Zhang, Xiaobo & Peng, Jingbo & Zhang, Fei & Wu, Xing, 2022. "Improving cooling performance and robustness of NGV endwall film cooling design using micro-scale ribs considering incidence effects," Energy, Elsevier, vol. 253(C).
    2. Barelli, L. & Bidini, G. & Bonucci, F. & Moretti, E., 2012. "The radiation factor computation of energy systems by means of vibration and noise measurements: The case study of a cogenerative internal combustion engine," Applied Energy, Elsevier, vol. 100(C), pages 258-266.
    3. Li, Haiwang & Wang, Meng & You, Ruquan & Liu, Song, 2023. "Thermal radiation correction formula of the scaling criteria for film cooling of turbine blades," Energy, Elsevier, vol. 282(C).
    4. Kardaś, Dariusz & Polesek-Karczewska, Sylwia & Turzyński, Tomasz & Wardach-Święcicka, Izabela & Hercel, Paulina & Szymborski, Jakub & Heda, Łukasz, 2023. "Thermal performance enhancement of a red-hot air furnace for a micro-scale externally fired gas turbine system," Energy, Elsevier, vol. 282(C).
    5. Zhang, Jikai & Wang, Changjian & Zhang, Aifeng, 2022. "Experimental study on temperature and performance of an open-cathode PEMFC stack under thermal radiation environment," Applied Energy, Elsevier, vol. 311(C).
    6. Park, Jun Su & Lee, Dong Hyun & Rhee, Dong-Ho & Kang, Shin Hyung & Cho, Hyung Hee, 2014. "Heat transfer and film cooling effectiveness on the squealer tip of a turbine blade," Energy, Elsevier, vol. 72(C), pages 331-343.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shi, Jingwei & Hui, Zhonghao & Zhou, Li & Wang, Zhanxue & Liu, Yongquan, 2025. "Experimental investigation on the cooling performance of multi-row film holes of a serpentine nozzle," Energy, Elsevier, vol. 320(C).
    2. Li, Chuan & Shen, Hongmeng & Wang, Ping & Long, Jianyu & Pu, Ziqiang, 2025. "Diffusion-based digital twin-driven adversarial domain adaptation for fault diagnosis in high-energy beam choppers," Energy, Elsevier, vol. 332(C).
    3. Qiu, Tian & Ma, Qinglin & Yuan, Qiyu & Gao, Ziqiang & Liu, Peng & Liu, Chuankai & Ding, Shuiting & Gan, Chenyu & Zhao, Wei, 2025. "Integrating aerodynamic loss into film cooling performance evaluation from a thermodynamic cycle perspective: a case study in compound angle design," Energy, Elsevier, vol. 340(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Fan & Liu, Cunliang & Ye, Lin & Ran, Yuan & Zhou, Tianliang & Yan, Haonan, 2024. "Study on the film superposition method for dense multirow film Hole layouts," Energy, Elsevier, vol. 293(C).
    2. Li, Haiwang & Wang, Meng & You, Ruquan & Liu, Song, 2023. "Thermal radiation correction formula of the scaling criteria for film cooling of turbine blades," Energy, Elsevier, vol. 282(C).
    3. Xu, Zhi-peng & Liu, Cun-liang & Ye, Lin & Zhu, Hui-ren & Wu, Zhuang, 2024. "Investigation of the effect of combustor swirl flow on turbine vane full coverage film cooling," Energy, Elsevier, vol. 295(C).
    4. Rulik, Sebastian & Wróblewski, Włodzimierz & Nowak, Grzegorz & Szwedowicz, Jarosław, 2015. "Heat transfer intensification using acoustic waves in a cavity," Energy, Elsevier, vol. 87(C), pages 21-30.
    5. Kardaś, Dariusz & Polesek-Karczewska, Sylwia, 2025. "Optimizing a 1.4 MW combined heat and power system: Efficiency in the light of high-temperature heat exchanger performance," Energy, Elsevier, vol. 332(C).
    6. Becker, F. & Cosse, C. & Gentner, C. & Schulz, D. & Liphardt, L., 2024. "Novel electrochemical and thermodynamic conditioning approaches and their evaluation for open cathode PEM-FC stacks," Applied Energy, Elsevier, vol. 363(C).
    7. Chang, Huawei & Cai, Fengyang & Yu, Xianxian & Duan, Chen & Chan, Siew Hwa & Tu, Zhengkai, 2023. "Experimental study on the thermal management of an open-cathode air-cooled proton exchange membrane fuel cell stack with ultra-thin metal bipolar plates," Energy, Elsevier, vol. 263(PA).
    8. Zou, Zhengping & Shao, Fei & Li, Yiran & Zhang, Weihao & Berglund, Albin, 2017. "Dominant flow structure in the squealer tip gap and its impact on turbine aerodynamic performance," Energy, Elsevier, vol. 138(C), pages 167-184.
    9. Li, Zhiyu & Zhang, Kaiyuan & Bai, Bo & Li, Zhigang & Duan, Fei & Li, Jun, 2025. "Turbine vane endwall heat transfer measurement and coolant migration mechanism considering film hole geometric deviation," Energy, Elsevier, vol. 339(C).
    10. Shen, Jun & Du, Changqing & Yan, Fuwu & Chen, Ben & Tu, Zhengkai, 2022. "Experimental study on the dynamic performance of a power system with dual air-cooled PEMFC stacks," Applied Energy, Elsevier, vol. 326(C).
    11. Bollas, Konstantinos & Banihabib, Reyhaneh & Assadi, Mohsen & Kalfas, Anestis, 2024. "Optimal operating scenario and performance comparison of biomass-fueled externally-fired microturbine," Energy, Elsevier, vol. 296(C).
    12. Lee, Jeongwon & Park, Hee Seung & Sohn, Ho-Seong & Kim, JeongJu & Choi, Jiyong & Choi, Jung-Il & Cho, Hyung Hee, 2025. "Optimization of film cooling hole using Genetic algorithm for enhanced turbine endwall cooling performance," Energy, Elsevier, vol. 341(C).
    13. Sciubba, Enrico, 2015. "Air-cooled gas turbine cycles – Part 1: An analytical method for the preliminary assessment of blade cooling flow rates," Energy, Elsevier, vol. 83(C), pages 104-114.
    14. Weng, Fang-Bor & Dlamini, Mangaliso Menzi & Tirumalasetti, Pandu Ranga & Hwang, Jenn-Jiang, 2024. "Experimental evaluation of flow field design on open-cathode proton exchange membrane fuel cells (PEMFC) short stack consisting of three cells," Renewable Energy, Elsevier, vol. 226(C).
    15. Zhu, Kai-Qi & Ding, Quan & Zhang, Ben-Xi & Xu, Jiang-Hai & Li, Dan-Dan & Yang, Yan-Ru & Lee, Duu-Jong & Wan, Zhong-Min & Wang, Xiao-Dong, 2024. "Performance enhancement of air-cooled PEMFC stack by employing tapered oblique fin channels: Experimental study of a full stack and numerical analysis of a typical single cell," Applied Energy, Elsevier, vol. 358(C).
    16. Kardaś, Dariusz & Polesek-Karczewska, Sylwia, 2025. "Small-scale air Brayton cycle fueled by green methanol – thermodynamic analysis," Energy, Elsevier, vol. 333(C).
    17. Yu, Xianxian & Luo, Xiaobing & Tu, Zhengkai, 2023. "Development of a compact high-power density air-cooled proton exchange membrane fuel cell stack with ultrathin steel bipolar plates," Energy, Elsevier, vol. 270(C).
    18. Lee, Sangyun & Park, Hee Seung & Kim, Gyeongryun & Lee, Jae Wook & Cho, Hyung Hee, 2025. "Thermal performance degradation induced by transition piece wall thickening in gas turbine," Energy, Elsevier, vol. 341(C).
    19. Chen, Fengxiang & Pei, Yaowang & Jiao, Jieran & Chi, Xuncheng & Hou, Zhongjun, 2023. "Energy flow and thermal voltage analysis of water-cooled PEMFC stack under normal operating conditions," Energy, Elsevier, vol. 275(C).
    20. Zhang, Yueliang & Li, Jiangheng & Xie, Jin, 2022. "Effects of lateral cooling hole configuration on a swirl-stabilized combustor," Energy, Elsevier, vol. 259(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:303:y:2024:i:c:s0360544224017791. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.