IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v302y2024ics0360544224015561.html
   My bibliography  Save this article

Development and assessment of an integrated wind energy system for green steelmaking based on electric arc furnace route

Author

Listed:
  • Hu, Hang
  • Yang, Lingzhi
  • Yang, Sheng
  • Zou, Yuchi
  • Wang, Shuai
  • Chen, Feng
  • Guo, Yufeng

Abstract

Optimizing energy structure is important for coping with the increasing environmental problems in iron and steel industry. Wind energy is one of typical zero-carbon, inexhaustible, and accessible energy source for alleviating energy dilemma. In this paper, the electric arc furnace steelmaking processes integrated with wind energy system (EAF-WES) is developed. The input-output data of 1214 and 1536 heats with 30 % and 50 % hot metal ratio are traced and collected. Life cycle assessment and techno-economic analysis of EAF route integrated with traditional energy system (EAF-TES) and EAF-WES are further researched and compared from perspectives of life cycle carbon footprint (LCCF), production cost, wind energy price (WEP), carbon efficiency, carbon reduction benefit (CRB), and carbon tax. The results indicate that EAF-WES enjoys lower LCCF but higher production cost and carbon efficiency than EAF-TES. Considering the price fluctuations, the optimal EAF steelmaking pattern with lowest production cost under different extent of WEP and carbon tax is suggested. When the electricity price is 0.043 and 0.046 $/kWh, the CRB is balanced. It is concluded that EAF-WES is a low-carbon, high-productive, environmentally friendly, and economical route. This research is expected to supply a technical idea for energy conservation and emission reduction in future steel production.

Suggested Citation

  • Hu, Hang & Yang, Lingzhi & Yang, Sheng & Zou, Yuchi & Wang, Shuai & Chen, Feng & Guo, Yufeng, 2024. "Development and assessment of an integrated wind energy system for green steelmaking based on electric arc furnace route," Energy, Elsevier, vol. 302(C).
    • Handle: RePEc:eee:energy:v:302:y:2024:i:c:s0360544224015561
    DOI: 10.1016/j.energy.2024.131783
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224015561
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.131783?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Nwachukwu, Chinedu Maureen & Olofsson, Elias & Lundmark, Robert & Wetterlund, Elisabeth, 2022. "Evaluating fuel switching options in the Swedish iron and steel industry under increased competition for forest biomass," Applied Energy, Elsevier, vol. 324(C).
    2. Liu, Lintong & Zhai, Rongrong & Hu, Yangdi, 2023. "Performance evaluation of wind-solar-hydrogen system for renewable energy generation and green hydrogen generation and storage: Energy, exergy, economic, and enviroeconomic," Energy, Elsevier, vol. 276(C).
    3. Cui, Peizhe & Xu, Zaifeng & Yao, Dong & Qi, Huaqing & Zhu, Zhaoyou & Wang, Yinglong & Li, Xin & Liu, Zhiqiang & Yang, Sheng, 2022. "Life cycle water footprint and carbon footprint analysis of municipal sludge plasma gasification process," Energy, Elsevier, vol. 261(PB).
    4. Zhao, Zhen-Yu & Li, Zhi-Wei & Xia, Bo, 2014. "The impact of the CDM (clean development mechanism) on the cost price of wind power electricity: A China study," Energy, Elsevier, vol. 69(C), pages 179-185.
    5. Wang, Xiaoyang & Yu, Biying & An, Runying & Sun, Feihu & Xu, Shuo, 2022. "An integrated analysis of China’s iron and steel industry towards carbon neutrality," Applied Energy, Elsevier, vol. 322(C).
    6. Xuan, Yanni & Yue, Qiang, 2017. "Scenario analysis on resource and environmental benefits of imported steel scrap for China’s steel industry," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 186-198.
    7. Alizadeh Zolbin, Mahboubeh & Tahouni, Nassim & Panjeshahi, M. Hassan, 2022. "Total site integration considering wind /solar energy with supply/demand variation," Energy, Elsevier, vol. 252(C).
    8. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Qiu, Ziyang & Yuan, Yuxing & He, Jianfei & Li, Yingnan & Wang, Yisong & Du, Tao, 2021. "A comprehensive assessment on material, exergy and emission networks for the integrated iron and steel industry," Energy, Elsevier, vol. 235(C).
    9. He, Kun & Wang, Li, 2017. "A review of energy use and energy-efficient technologies for the iron and steel industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 1022-1039.
    10. Alexandra Devlin & Jannik Kossen & Haulwen Goldie-Jones & Aidong Yang, 2023. "Global green hydrogen-based steel opportunities surrounding high quality renewable energy and iron ore deposits," Nature Communications, Nature, vol. 14(1), pages 1-14, December.
    11. Toktarova, Alla & Walter, Viktor & Göransson, Lisa & Johnsson, Filip, 2022. "Interaction between electrified steel production and the north European electricity system," Applied Energy, Elsevier, vol. 310(C).
    12. Ai, Hongshan & Xiong, Shiya & Li, Ke & Jia, Pinrong, 2020. "Electricity price and industrial green productivity: Does the “low-electricity price trap” exist?," Energy, Elsevier, vol. 207(C).
    13. Li, Zhaoling & Dai, Hancheng & Song, Junnian & Sun, Lu & Geng, Yong & Lu, Keyu & Hanaoka, Tatsuya, 2019. "Assessment of the carbon emissions reduction potential of China's iron and steel industry based on a simulation analysis," Energy, Elsevier, vol. 183(C), pages 279-290.
    14. Ciupăgeanu, Dana-Alexandra & Lăzăroiu, Gheorghe & Barelli, Linda, 2019. "Wind energy integration: Variability analysis and power system impact assessment," Energy, Elsevier, vol. 185(C), pages 1183-1196.
    15. Takuma Watari & Sho Hata & Kenichi Nakajima & Keisuke Nansai, 2023. "Limited quantity and quality of steel supply in a zero-emission future," Nature Sustainability, Nature, vol. 6(3), pages 336-343, March.
    16. Kirschen, Marcus & Risonarta, Victor & Pfeifer, Herbert, 2009. "Energy efficiency and the influence of gas burners to the energy related carbon dioxide emissions of electric arc furnaces in steel industry," Energy, Elsevier, vol. 34(9), pages 1065-1072.
    17. Lopez, Gabriel & Galimova, Tansu & Fasihi, Mahdi & Bogdanov, Dmitrii & Breyer, Christian, 2023. "Towards defossilised steel: Supply chain options for a green European steel industry," Energy, Elsevier, vol. 273(C).
    18. Ren, Lei & Zhou, Sheng & Peng, Tianduo & Ou, Xunmin, 2021. "A review of CO2 emissions reduction technologies and low-carbon development in the iron and steel industry focusing on China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Wang, Peng-Tao & Xu, Qing-Chuang & Wang, Fei-Yin & Xu, Mao, 2025. "Study on the coupling of the iron and steel industry with renewable energy for low-carbon production: A case study of matching steel plants with photovoltaic power plants in China," Energy, Elsevier, vol. 320(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yihan Wang & Zongguo Wen & Mao Xu & Christian Doh Dinga, 2025. "Long-term transformation in China’s steel sector for carbon capture and storage technology deployment," Nature Communications, Nature, vol. 16(1), pages 1-13, December.
    2. Zhang, Hanxin & Sun, Wenqiang & Li, Weidong & Ma, Guangyu, 2022. "A carbon flow tracing and carbon accounting method for exploring CO2 emissions of the iron and steel industry: An integrated material–energy–carbon hub," Applied Energy, Elsevier, vol. 309(C).
    3. Wang, Peng-Tao & Xu, Qing-Chuang & Wang, Fei-Yin & Xu, Mao, 2025. "Study on the coupling of the iron and steel industry with renewable energy for low-carbon production: A case study of matching steel plants with photovoltaic power plants in China," Energy, Elsevier, vol. 320(C).
    4. Shuangping Wu & Anjun Xu, 2021. "Calculation Method of Energy Saving in Process Engineering: A Case Study of Iron and Steel Production Process," Energies, MDPI, vol. 14(18), pages 1-15, September.
    5. Lee, Hwarang, 2023. "Decarbonization strategies for steel production with uncertainty in hydrogen direct reduction," Energy, Elsevier, vol. 283(C).
    6. Yuan, Yuxing & Na, Hongming & Chen, Chuang & Qiu, Ziyang & Sun, Jingchao & Zhang, Lei & Du, Tao & Yang, Yuhang, 2024. "Status, challenges, and prospects of energy efficiency improvement methods in steel production: A multi-perspective review," Energy, Elsevier, vol. 304(C).
    7. Su, Pengfei & Zhou, Yue & Li, Hongyi & Perez, Hector D. & Wu, Jianzhong, 2025. "Cost-effective scheduling of a hydrogen-based iron and steel plant powered by a grid-assisted renewable energy system," Applied Energy, Elsevier, vol. 384(C).
    8. Yihan Wang & Chen Chen & Yuan Tao & Zongguo Wen, 2025. "Uneven renewable energy supply constrains the decarbonization effects of excessively deployed hydrogen-based DRI technology," Nature Communications, Nature, vol. 16(1), pages 1-14, December.
    9. Takuma Watari & André Cabrera Serrenho & Lukas Gast & Jonathan Cullen & Julian Allwood, 2023. "Feasible supply of steel and cement within a carbon budget is likely to fall short of expected global demand," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    10. Marcin Sajdak & Roksana Muzyka & Grzegorz Gałko & Ewelina Ksepko & Monika Zajemska & Szymon Sobek & Dariusz Tercki, 2022. "Actual Trends in the Usability of Biochar as a High-Value Product of Biomass Obtained through Pyrolysis," Energies, MDPI, vol. 16(1), pages 1-30, December.
    11. Manojlović, Vaso & Kamberović, Željko & Korać, Marija & Dotlić, Milan, 2022. "Machine learning analysis of electric arc furnace process for the evaluation of energy efficiency parameters," Applied Energy, Elsevier, vol. 307(C).
    12. Shen, Jialin & Zhang, Qi & Tian, Shuoshuo, 2025. "Decarbonization pathways analysis and recommendations in the green steel supply chain of a typical steel end user-automotive industry," Applied Energy, Elsevier, vol. 377(PD).
    13. Lopez, Gabriel & Pourjamal, Yousef & Breyer, Christian, 2025. "Paving the way towards a sustainable future or lagging behind? An ex-post analysis of the International Energy Agency's World Energy Outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 212(C).
    14. Peter Klimek & Maximilian Hess & Markus Gerschberger & Stefan Thurner, 2024. "Circular transformation of the European steel industry renders scrap metal a strategic resource," Papers 2406.12098, arXiv.org.
    15. Qiu, Ziyang & Sun, Jingchao & Du, Tao & Na, Hongming & Zhang, Lei & Yuan, Yuxing & Wang, Yisong, 2024. "Impact of hydrogen metallurgy on the current iron and steel industry: A comprehensive material-exergy-emission flow analysis," Applied Energy, Elsevier, vol. 356(C).
    16. Wu, Haotian & Ke, Deping & Xu, Jian & Song, Lin & Liao, Siyang & Zhang, Pengcheng, 2025. "Low-carbon economic dispatch of iron and steel industry empowered by wind‑hydrogen energy: Modeling and stochastic programming," Applied Energy, Elsevier, vol. 387(C).
    17. Yuancheng Lin & Honghua Yang & Linwei Ma & Zheng Li & Weidou Ni, 2021. "Low-Carbon Development for the Iron and Steel Industry in China and the World: Status Quo, Future Vision, and Key Actions," Sustainability, MDPI, vol. 13(22), pages 1-28, November.
    18. Chen, Demin & Li, Jiaqi & Wang, Zhao & Lu, Biao & Chen, Guang, 2022. "Hierarchical model to find the path reducing CO2 emissions of integrated iron and steel production," Energy, Elsevier, vol. 258(C).
    19. Wang, Yihan & Wen, Zongguo & Yao, Jianguo & Doh Dinga, Christian, 2020. "Multi-objective optimization of synergic energy conservation and CO2 emission reduction in China's iron and steel industry under uncertainty," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    20. Jorge Perpiñán & Manuel Bailera & Luis M. Romeo & Begoña Peña & Valerie Eveloy, 2021. "CO 2 Recycling in the Iron and Steel Industry via Power-to-Gas and Oxy-Fuel Combustion," Energies, MDPI, vol. 14(21), pages 1-15, October.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:302:y:2024:i:c:s0360544224015561. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.