IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v286y2024ics0360544223030074.html
   My bibliography  Save this article

Energy efficiency analysis and optimization of a pressurized oxy-fuel circulating fluidized bed combustion system

Author

Listed:
  • Kong, Runjuan
  • Li, Wei
  • Wang, Haigang
  • Ren, Qiangqiang

Abstract

The commercial application of oxy-fuel combustion technology is limited by energy deduction which is caused by addition of air separation unit (ASU) and carbon dioxide compression and purification unit (CPU). Pressurized circulating fluidized bed (CFB) oxy-fuel combustion technology is one option to improve the net electric generation efficiency. In this research, a series of simulations and optimizations were carried out to analyze the energy efficiency of a pressurized oxy-fuel combustion system. The boiler structure and heat exchange surface arrangement under different pressure were calculated. The cross-sectional area of the furnace and tail flue were both reduced up to 10 % of the original size and the floor space of the boiler was considered to be the lowest at 1.1 MPa. The energy efficiency and exergy analysis were used to explore the influence of pressure on the net efficiency and the optimization potential of system. The net electric generation efficiency reached a maximum value of 24.16 % at 1.1 MPa, which is 5.4 % higher than that at atmospheric pressure. Finally, four parameters, i.e. preheat temperature, oxygen concentration, ASU outlet oxygen purity and CPU compressor outlet pressure, were optimized to improve the system net efficiency to 26.67 %, 29.04 %, 25.87 % and 24.36 %, respectively.

Suggested Citation

  • Kong, Runjuan & Li, Wei & Wang, Haigang & Ren, Qiangqiang, 2024. "Energy efficiency analysis and optimization of a pressurized oxy-fuel circulating fluidized bed combustion system," Energy, Elsevier, vol. 286(C).
    • Handle: RePEc:eee:energy:v:286:y:2024:i:c:s0360544223030074
    DOI: 10.1016/j.energy.2023.129613
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223030074
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.129613?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:286:y:2024:i:c:s0360544223030074. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.