IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223023484.html
   My bibliography  Save this article

A categorized and decomposed algorithm for thermal system simulation based on generalized benders decomposition

Author

Listed:
  • Xin, Yong-Lin
  • Sun, Qing-Han
  • Zhao, Tian
  • Li, Xia
  • Chen, Qun

Abstract

Accurate and efficient analysis of thermal systems is increasingly difficult with the increasing system scale and complexity. Many studies have to sacrifice the accuracy for calculation efficiency by simplifications. This work proposes a categorized and decomposed (C&D) algorithm to simulate thermal systems efficiently and robustly without introducing any simplification. It converts the system simulation into an equivalent optimization problem, which categorizes system constraints according to whether they are linear, and decomposes the optimization problem into a subproblem and a master problem to handle nonlinearity. Besides, variables’ gradient information is used to accelerate the convergence and enhance the stability. The proposed algorithm is applied to a supercritical carbon dioxide (sCO2) recompression Brayton cycle, and results show that it consumes about 8.84% calculation time compared with sequential modular method and requires much fewer initial values (about two orders of magnitude) compared with simultaneous equations method. Compared with the hierarchical and categorized algorithm, the proposed algorithm has a 48% larger convergence range regarding the deviation of initial values, and is more efficient when the initial value deviation is small. The proposed C&D algorithm owns a much higher efficiency and robustness and is a promising tool for complex thermal system simulation.

Suggested Citation

  • Xin, Yong-Lin & Sun, Qing-Han & Zhao, Tian & Li, Xia & Chen, Qun, 2023. "A categorized and decomposed algorithm for thermal system simulation based on generalized benders decomposition," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223023484
    DOI: 10.1016/j.energy.2023.128954
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223023484
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128954?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Reyes-Belmonte, M.A. & Sebastián, A. & Romero, M. & González-Aguilar, J., 2016. "Optimization of a recompression supercritical carbon dioxide cycle for an innovative central receiver solar power plant," Energy, Elsevier, vol. 112(C), pages 17-27.
    2. Zhao, Tian & Sun, Qing-Han & Li, Xia & Xin, Yong-Lin & Chen, Qun, 2023. "A novel transfer matrix-based method for steady-state modeling and analysis of thermal systems," Energy, Elsevier, vol. 281(C).
    3. Shu, Gequn & Shi, Lingfeng & Tian, Hua & Li, Xiaoya & Huang, Guangdai & Chang, Liwen, 2016. "An improved CO2-based transcritical Rankine cycle (CTRC) used for engine waste heat recovery," Applied Energy, Elsevier, vol. 176(C), pages 171-182.
    4. Xin, Yong-Lin & Zhao, Tian & Chen, Xi & He, Ke-Lun & Ma, Huan & Chen, Qun, 2022. "Heat current method-based real-time coordination of power and heat generation of multi-CHP units with flexibility retrofits," Energy, Elsevier, vol. 252(C).
    5. Chen, Xi & Zhao, Tian & Chen, Qun, 2022. "An online parameter identification and real-time optimization platform for thermal systems and its application," Applied Energy, Elsevier, vol. 307(C).
    6. Zhao, Tian & Min, Yong & Chen, Qun & Hao, Jun-Hong, 2016. "Electrical circuit analogy for analysis and optimization of absorption energy storage systems," Energy, Elsevier, vol. 104(C), pages 171-183.
    7. Rahmaniani, Ragheb & Crainic, Teodor Gabriel & Gendreau, Michel & Rei, Walter, 2017. "The Benders decomposition algorithm: A literature review," European Journal of Operational Research, Elsevier, vol. 259(3), pages 801-817.
    8. Song, Jian & Gu, Chun-wei, 2015. "Performance analysis of a dual-loop organic Rankine cycle (ORC) system with wet steam expansion for engine waste heat recovery," Applied Energy, Elsevier, vol. 156(C), pages 280-289.
    9. Barton, Russell R. & Hearn, Donald W. & Lawphongpanich, Siriphong, 1989. "The equivalence of transfer and generalized benders decomposition methods for traffic assignment," Transportation Research Part B: Methodological, Elsevier, vol. 23(1), pages 61-73, February.
    10. Eduardo Muñoz & Mathias Stolpe, 2011. "Generalized Benders’ Decomposition for topology optimization problems," Journal of Global Optimization, Springer, vol. 51(1), pages 149-183, September.
    11. Zhao, Tian & Chen, Xi & He, Ke-Lun & Chen, Qun, 2021. "A standardized modeling strategy for heat current method-based analysis and simulation of thermal systems," Energy, Elsevier, vol. 217(C).
    12. Wang, Shukun & Liu, Zuming & Liu, Chao & Wang, Xiaonan, 2022. "Thermodynamic analysis of operating strategies for waste heat recovery of combined heating and power systems," Energy, Elsevier, vol. 258(C).
    13. Li, Xia & Chen, Qun & Chen, Xi & He, Ke-Lun & Hao, Jun-Hong, 2020. "Graph theory-based heat current analysis method for supercritical CO2 power generation system," Energy, Elsevier, vol. 194(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Xi & Chen, Qun & Chen, Hong & Xu, Ying-Gen & Zhao, Tian & Hu, Kang & He, Ke-Lun, 2019. "Heat current method for analysis and optimization of heat recovery-based power generation systems," Energy, Elsevier, vol. 189(C).
    2. Zhao, Tian & Sun, Qing-Han & Li, Xia & Xin, Yong-Lin & Chen, Qun, 2023. "A novel transfer matrix-based method for steady-state modeling and analysis of thermal systems," Energy, Elsevier, vol. 281(C).
    3. Zhao, Tian & Chen, Xi & He, Ke-Lun & Chen, Qun, 2021. "A hierarchical and categorized algorithm for efficient and robust simulation of thermal systems based on the heat current method," Energy, Elsevier, vol. 215(PA).
    4. Huang, Guangdai & Shu, Gequn & Tian, Hua & Shi, Lingfeng & Zhuge, Weilin & Zhang, Jing & Atik, Mohammad Atikur Rahman, 2020. "Development and experimental study of a supercritical CO2 axial turbine applied for engine waste heat recovery," Applied Energy, Elsevier, vol. 257(C).
    5. Santini, Lorenzo & Accornero, Carlo & Cioncolini, Andrea, 2016. "On the adoption of carbon dioxide thermodynamic cycles for nuclear power conversion: A case study applied to Mochovce 3 Nuclear Power Plant," Applied Energy, Elsevier, vol. 181(C), pages 446-463.
    6. Zhao, Tian & Chen, Xi & He, Ke-Lun & Chen, Qun, 2021. "A standardized modeling strategy for heat current method-based analysis and simulation of thermal systems," Energy, Elsevier, vol. 217(C).
    7. He, Ke-Lun & Zhao, Tian & Ma, Huan & Chen, Qun, 2023. "Optimal operation of integrated power and thermal systems for flexibility improvement based on evaluation and utilization of heat storage in district heating systems," Energy, Elsevier, vol. 274(C).
    8. Song, Jian & Li, Xue-song & Ren, Xiao-dong & Gu, Chun-wei, 2018. "Performance analysis and parametric optimization of supercritical carbon dioxide (S-CO2) cycle with bottoming Organic Rankine Cycle (ORC)," Energy, Elsevier, vol. 143(C), pages 406-416.
    9. Zhu, Sipeng & Zhang, Kun & Deng, Kangyao, 2020. "A review of waste heat recovery from the marine engine with highly efficient bottoming power cycles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 120(C).
    10. Esmaeilbeigi, Rasul & Mak-Hau, Vicky & Yearwood, John & Nguyen, Vivian, 2022. "The multiphase course timetabling problem," European Journal of Operational Research, Elsevier, vol. 300(3), pages 1098-1119.
    11. Guillaume, Ludovic & Legros, Arnaud & Desideri, Adriano & Lemort, Vincent, 2017. "Performance of a radial-inflow turbine integrated in an ORC system and designed for a WHR on truck application: An experimental comparison between R245fa and R1233zd," Applied Energy, Elsevier, vol. 186(P3), pages 408-422.
    12. Özgün Elçi & John Hooker, 2022. "Stochastic Planning and Scheduling with Logic-Based Benders Decomposition," INFORMS Journal on Computing, INFORMS, vol. 34(5), pages 2428-2442, September.
    13. Li, Pengcheng & Cao, Qing & Li, Jing & Lin, Haiwei & Wang, Yandong & Gao, Guangtao & Pei, Gang & Jie, Desuan & Liu, Xunfen, 2021. "An innovative approach to recovery of fluctuating industrial exhaust heat sources using cascade Rankine cycle and two-stage accumulators," Energy, Elsevier, vol. 228(C).
    14. Zhou, Aozheng & Li, Xue-song & Ren, Xiao-dong & Song, Jian & Gu, Chun-wei, 2020. "Thermodynamic and economic analysis of a supercritical carbon dioxide (S–CO2) recompression cycle with the radial-inflow turbine efficiency prediction," Energy, Elsevier, vol. 191(C).
    15. Di, Zhen & Yang, Lixing & Shi, Jungang & Zhou, Housheng & Yang, Kai & Gao, Ziyou, 2022. "Joint optimization of carriage arrangement and flow control in a metro-based underground logistics system," Transportation Research Part B: Methodological, Elsevier, vol. 159(C), pages 1-23.
    16. Yu, Xiaoli & Li, Zhi & Lu, Yiji & Huang, Rui & Roskilly, Anthony Paul, 2019. "Investigation of organic Rankine cycle integrated with double latent thermal energy storage for engine waste heat recovery," Energy, Elsevier, vol. 170(C), pages 1098-1112.
    17. W. Chung & J. Fuller & Y. Wu, 2003. "A New Demand-Supply Decomposition Method for a Class of Economic Equilibrium Models," Computational Economics, Springer;Society for Computational Economics, vol. 21(3), pages 231-243, June.
    18. Sun, Lei & Liu, Tianyuan & Wang, Ding & Huang, Chengming & Xie, Yonghui, 2022. "Deep learning method based on graph neural network for performance prediction of supercritical CO2 power systems," Applied Energy, Elsevier, vol. 324(C).
    19. Alklaibi, A.M. & Lior, N., 2021. "Waste heat utilization from internal combustion engines for power augmentation and refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    20. Schmid, Nico André & Limère, Veronique & Raa, Birger, 2021. "Mixed model assembly line feeding with discrete location assignments and variable station space," Omega, Elsevier, vol. 102(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223023484. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.