IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223023071.html
   My bibliography  Save this article

A novel hybrid pyroelectric-Stirling engine power generation system

Author

Listed:
  • Al-Nimr, Moh'd
  • Khashan, Saud
  • Al-Oqla, Hashem

Abstract

Temperature fluctuations in the thermal regenerator of Stirling Engine SE occur at relatively high frequencies, making them amenable to direct harvesting using Pyroelectric materials. This paper demonstrates the technical feasibility of a novel hybrid Stirling Engine (SE), coupled with inserted pyroelectric generators in its thermal regenerator, to produce extra power through the pyroelectric effect and increase engine performance. Theoretical models have been constructed to analyze the performance of the pyroelectric-Stirling engine (P-SE) system and determine its advantages over conventional SEs. The transient thermal behavior of the pyroelectric regenerator is modeled by subdividing it into multiple lumped sub-regenerators. Replacing the metal regenerator in a conventional SE at 750 K hot chamber temperature with a pyroelectric regenerator increased power production by 2.9%. Furthermore, at 25 Hz fluctuation, 15 mm regenerator length, and regenerator porosity of 0.6, the system efficiency of the hybrid P-SE system increased by 0.5% and 3.5% compared to systems using steel and aluminum regenerators, respectively. Also, the P-SE system operating at 25 Hz yields the highest combined efficiency of 49.8% at the regenerator porosity of 0.6.

Suggested Citation

  • Al-Nimr, Moh'd & Khashan, Saud & Al-Oqla, Hashem, 2023. "A novel hybrid pyroelectric-Stirling engine power generation system," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223023071
    DOI: 10.1016/j.energy.2023.128913
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223023071
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128913?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Costa, Sol-Carolina & Tutar, Mustafa & Barreno, Igor & Esnaola, Jon-Ander & Barrutia, Haritz & García, David & González, Miguel-Angel & Prieto, Jesús-Ignacio, 2014. "Experimental and numerical flow investigation of Stirling engine regenerator," Energy, Elsevier, vol. 72(C), pages 800-812.
    2. Nielsen, Anders S. & York, Brayden T. & MacDonald, Brendan D., 2019. "Stirling engine regenerators: How to attain over 95% regenerator effectiveness with sub-regenerators and thermal mass ratios," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Al-Nimr, Moh'd & Khashan, Saud A. & Al-Oqla, Hashem, 2023. "Novel techniques to enhance the performance of Stirling engines integrated with solar systems," Renewable Energy, Elsevier, vol. 202(C), pages 894-906.
    2. Shi, Peng & Wang, Lin-Shu & Schwartz, Paul & Hofbauer, Peter, 2020. "State-wide comparative analysis of the cost saving potential of Vuilleumier heat pumps in residential houses," Applied Energy, Elsevier, vol. 277(C).
    3. Sadrameli, S.M., 2016. "Mathematical models for the simulation of thermal regenerators: A state-of-the-art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 58(C), pages 462-476.
    4. Pablo Jimenez Zabalaga & Evelyn Cardozo & Luis A. Choque Campero & Joseph Adhemar Araoz Ramos, 2020. "Performance Analysis of a Stirling Engine Hybrid Power System," Energies, MDPI, vol. 13(4), pages 1-38, February.
    5. Ferreira, Ana C. & Nunes, Manuel L. & Teixeira, José C.F. & Martins, Luís A.S.B. & Teixeira, Senhorinha F.C.F., 2016. "Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes," Energy, Elsevier, vol. 111(C), pages 1-17.
    6. Yajuan Wang & Jun’an Zhang & Zhiwei Lu & Bo Liu & Hao Dong, 2023. "Analysis of Fluid-Solid Coupling Radial Heat Transfer Characteristics in a Normal Hexagonal Bundle Regenerator under Oscillating Flow," Energies, MDPI, vol. 16(18), pages 1-27, September.
    7. Zare, Shahryar & Tavakolpour-saleh, A.R. & Aghahosseini, A. & Sangdani, M.H. & Mirshekari, Reza, 2021. "Design and optimization of Stirling engines using soft computing methods: A review," Applied Energy, Elsevier, vol. 283(C).
    8. Nielsen, Anders S. & York, Brayden T. & MacDonald, Brendan D., 2019. "Stirling engine regenerators: How to attain over 95% regenerator effectiveness with sub-regenerators and thermal mass ratios," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    9. González-Pino, I. & Pérez-Iribarren, E. & Campos-Celador, A. & Las-Heras-Casas, J. & Sala, J.M., 2015. "Influence of the regulation framework on the feasibility of a Stirling engine-based residential micro-CHP installation," Energy, Elsevier, vol. 84(C), pages 575-588.
    10. Miguel Torres García & Elisa Carvajal Trujillo & José Antonio Vélez Godiño & David Sánchez Martínez, 2018. "Thermodynamic Model for Performance Analysis of a Stirling Engine Prototype," Energies, MDPI, vol. 11(10), pages 1-25, October.
    11. Araoz, Joseph A. & Salomon, Marianne & Alejo, Lucio & Fransson, Torsten H., 2015. "Numerical simulation for the design analysis of kinematic Stirling engines," Applied Energy, Elsevier, vol. 159(C), pages 633-650.
    12. Yajuan Wang & Jun’an Zhang & Zhiwei Lu & Jiayu Liu & Bo Liu & Hao Dong, 2022. "Analytical Solution of Heat Transfer Performance of Grid Regenerator in Inverse Stirling Cycle," Energies, MDPI, vol. 15(19), pages 1-25, September.
    13. Rutczyk, Bartłomiej & Szczygieł, Ireneusz & Kabaj, Adam, 2020. "Evaluation of an α type stirling engine regenerator using a new differential model," Energy, Elsevier, vol. 209(C).
    14. Kumaravelu, Thavamalar & Saadon, Syamimi & Abu Talib, Abd Rahim, 2022. "Heat transfer enhancement of a Stirling engine by using fins attachment in an energy recovery system," Energy, Elsevier, vol. 239(PA).
    15. Chen, Pengfan & Zhong, Geyu & Niu, Yafeng & Liu, Yingwen, 2022. "Performance optimization of a free piston stirling engine using multi-section regenerators based on the response surface methodology," Energy, Elsevier, vol. 261(PB).
    16. Mohammadi, Mohammad Amin & Jafarian, Ali, 2018. "CFD simulation to investigate hydrodynamics of oscillating flow in a beta-type Stirling engine," Energy, Elsevier, vol. 153(C), pages 287-300.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223023071. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.