IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v268y2023ics0360544222033758.html

Inkjet printing of perovskite ceramics for high-performance proton ceramic fuel cells

Author

Listed:
  • Chang, Wanhyuk
  • Kang, Eun Heui
  • Jeong, Heon Jun
  • Choi, Wonjoon
  • Shim, Joon Hyung

Abstract

In this study, we successfully fabricated the perovskite materials for anode-supported proton ceramic fuel cells (PCFCs). This was achieved using an inexpensive commercial thermal inkjet printer, which is an economical and efficient inkjet printing technique. The ceramic ink source was synthesized by dissolving PrBa0.5Sr0·5Co1·5Fe0·5O5+δ (PBSCF) as a cathode nanopowder as a pigment material in ethanol and propylene glycol methyl ether-based solvents with a variety of surfactants. We could optimize the precise cathode microstructure through grayscale control using commercial software. We achieved high performance in the low-temperature region. Moreover, it was stable even under long-term operation conditions. A peak power density of 728 mWcm−2 at 600 °C was achieved. This verified that the performance was maintained without significant degradation for 80 h at 500 °C. We propose an efficient method for fabricating high-quality and precise PBSCF cathodes in PCFCs using inkjet printing.

Suggested Citation

  • Chang, Wanhyuk & Kang, Eun Heui & Jeong, Heon Jun & Choi, Wonjoon & Shim, Joon Hyung, 2023. "Inkjet printing of perovskite ceramics for high-performance proton ceramic fuel cells," Energy, Elsevier, vol. 268(C).
    • Handle: RePEc:eee:energy:v:268:y:2023:i:c:s0360544222033758
    DOI: 10.1016/j.energy.2022.126489
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222033758
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.126489?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Emadi, Mohammad Ali & Chitgar, Nazanin & Oyewunmi, Oyeniyi A. & Markides, Christos N., 2020. "Working-fluid selection and thermoeconomic optimisation of a combined cycle cogeneration dual-loop organic Rankine cycle (ORC) system for solid oxide fuel cell (SOFC) waste-heat recovery," Applied Energy, Elsevier, vol. 261(C).
    2. Kirubakaran, A. & Jain, Shailendra & Nema, R.K., 2009. "A review on fuel cell technologies and power electronic interface," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2430-2440, December.
    3. Sihyuk Choi & Chris J. Kucharczyk & Yangang Liang & Xiaohang Zhang & Ichiro Takeuchi & Ho-Il Ji & Sossina M. Haile, 2018. "Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells," Nature Energy, Nature, vol. 3(3), pages 202-210, March.
    4. Yan, Dong & Liang, Lingjiang & Yang, Jiajun & Zhang, Tao & Pu, Jian & Chi, Bo & Li, Jian, 2017. "Performance degradation and analysis of 10-cell anode-supported SOFC stack with external manifold structure," Energy, Elsevier, vol. 125(C), pages 663-670.
    5. Hossain, Shahzad & Abdalla, Abdalla M. & Jamain, Siti Noorazean Binti & Zaini, Juliana Hj & Azad, Abul K., 2017. "A review on proton conducting electrolytes for clean energy and intermediate temperature-solid oxide fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 750-764.
    6. Chuancheng Duan & Robert J. Kee & Huayang Zhu & Canan Karakaya & Yachao Chen & Sandrine Ricote & Angelique Jarry & Ethan J. Crumlin & David Hook & Robert Braun & Neal P. Sullivan & Ryan O’Hayre, 2018. "Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells," Nature, Nature, vol. 557(7704), pages 217-222, May.
    7. Chuancheng Duan & Robert Kee & Huayang Zhu & Neal Sullivan & Liangzhu Zhu & Liuzhen Bian & Dylan Jennings & Ryan O’Hayre, 2019. "Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production," Nature Energy, Nature, vol. 4(3), pages 230-240, March.
    8. Yu Chen & Ben deGlee & Yu Tang & Ziyun Wang & Bote Zhao & Yuechang Wei & Lei Zhang & Seonyoung Yoo & Kai Pei & Jun Hyuk Kim & Yong Ding & P. Hu & Franklin Feng Tao & Meilin Liu, 2018. "A robust fuel cell operated on nearly dry methane at 500 °C enabled by synergistic thermal catalysis and electrocatalysis," Nature Energy, Nature, vol. 3(12), pages 1042-1050, December.
    9. Kiho Bae & Dong Young Jang & Hyung Jong Choi & Donghwan Kim & Jongsup Hong & Byung-Kook Kim & Jong-Ho Lee & Ji-Won Son & Joon Hyung Shim, 2017. "Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells," Nature Communications, Nature, vol. 8(1), pages 1-9, April.
    10. Guohua Hu & Tom Albrow-Owen & Xinxin Jin & Ayaz Ali & Yuwei Hu & Richard C. T. Howe & Khurram Shehzad & Zongyin Yang & Xuekun Zhu & Robert I. Woodward & Tien-Chun Wu & Henri Jussila & Jiang-Bin Wu & P, 2017. "Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics," Nature Communications, Nature, vol. 8(1), pages 1-10, December.
    11. Santhanam, S. & Heddrich, M.P. & Riedel, M. & Friedrich, K.A., 2017. "Theoretical and experimental study of Reversible Solid Oxide Cell (r-SOC) systems for energy storage," Energy, Elsevier, vol. 141(C), pages 202-214.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ling, Yeqing & Huang, Feifan & Wang, Long & Xiao, Guoping & Li, Tao, 2025. "Scaffold-infiltrated self-assembled cathodes for intermediate-low-temperature protonic ceramic fuel cells," Energy, Elsevier, vol. 341(C).
    2. Lei, Libin & Mo, Yingyu & Huang, Yue & Qiu, Ruiming & Tian, Zhipeng & Wang, Junyao & Liu, Jianping & Chen, Ying & Zhang, Jihao & Tao, Zetian & Liang, Bo & Wang, Chao, 2023. "Revealing and quantifying the role of oxygen-ionic current in proton-conducting solid oxide fuel cells: A modeling study," Energy, Elsevier, vol. 276(C).
    3. Ong, Samuel & Al-Othman, Amani & Tawalbeh, Muhammad, 2023. "Emerging technologies in prognostics for fuel cells including direct hydrocarbon fuel cells," Energy, Elsevier, vol. 277(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fan Liu & Chuancheng Duan, 2021. "Direct-Hydrocarbon Proton-Conducting Solid Oxide Fuel Cells," Sustainability, MDPI, vol. 13(9), pages 1-9, April.
    2. Li, Kunpeng & Murakami, Takeru & Nagata, Yohei & Mikami, Yuichi & Yamauchi, Kosuke & Kuroha, Tomohiro & Okuyama, Yuji & Mizutani, Yasunobu & Mori, Masashi & Araki, Takuto, 2025. "What kind of PCFC material physical property values do we need? —From a system efficiency perspective," Applied Energy, Elsevier, vol. 381(C).
    3. Choi, Sung Min & An, Hyegsoon & Yoon, Kyung Joong & Kim, Byung-Kook & Lee, Hae-Weon & Son, Ji-Won & Kim, Hyoungchul & Shin, Dongwook & Ji, Ho-Il & Lee, Jong-Ho, 2019. "Electrochemical analysis of high-performance protonic ceramic fuel cells based on a columnar-structured thin electrolyte," Applied Energy, Elsevier, vol. 233, pages 29-36.
    4. Danilov, Nikolay & Lyagaeva, Julia & Vdovin, Gennady & Medvedev, Dmitry, 2019. "Multifactor performance analysis of reversible solid oxide cells based on proton-conducting electrolytes," Applied Energy, Elsevier, vol. 237(C), pages 924-934.
    5. Kim, J. & Sengodan, S. & Kim, S. & Kwon, O. & Bu, Y. & Kim, G., 2019. "Proton conducting oxides: A review of materials and applications for renewable energy conversion and storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 109(C), pages 606-618.
    6. Serdar Yilmaz & Bekir Kavici & Prakash Ramakrishnan & Cigdem Celen & Bahman Amini Horri, 2023. "Highly Conductive Cerium- and Neodymium-Doped Barium Zirconate Perovskites for Protonic Ceramic Fuel Cells," Energies, MDPI, vol. 16(11), pages 1-14, May.
    7. Zarabi Golkhatmi, Sanaz & Asghar, Muhammad Imran & Lund, Peter D., 2022. "A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    8. Zuoqing Liu & Yuesheng Bai & Hainan Sun & Daqin Guan & Wenhuai Li & Wei-Hsiang Huang & Chih-Wen Pao & Zhiwei Hu & Guangming Yang & Yinlong Zhu & Ran Ran & Wei Zhou & Zongping Shao, 2024. "Synergistic dual-phase air electrode enables high and durable performance of reversible proton ceramic electrochemical cells," Nature Communications, Nature, vol. 15(1), pages 1-15, December.
    9. Jolaoso, Lateef A. & Yousuf, Abu & Liu, Fan & Duan, Chuancheng & Kazempoor, Pejman, 2024. "Efficient Energy Storage via Methane Production Using Protonic Ceramic Electrochemical Cells," Applied Energy, Elsevier, vol. 369(C).
    10. Ze Liu & Yufei Song & Xiaolu Xiong & Yuxuan Zhang & Jingzeng Cui & Jianqiu Zhu & Lili Li & Jing Zhou & Chuan Zhou & Zhiwei Hu & Guntae Kim & Francesco Ciucci & Zongping Shao & Jian-Qiang Wang & Linjua, 2023. "Sintering-induced cation displacement in protonic ceramics and way for its suppression," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    11. Mohamad Fairus Rabuni & Tao Li & Mohd Hafiz Dzarfan Othman & Faidzul Hakim Adnan & Kang Li, 2023. "Progress in Solid Oxide Fuel Cells with Hydrocarbon Fuels," Energies, MDPI, vol. 16(17), pages 1-36, September.
    12. Feng Zhu & Kang Xu & Yuhe Liao & Liyan Chen & Yangsen Xu & Feng Hu & Fan He & Xirui Zhang & Yu Chen, 2026. "A medium-entropy oxygen electrode enables high-performance and contaminant-tolerant reversible solid oxide cells," Nature Communications, Nature, vol. 17(1), pages 1-13, December.
    13. Kyungpyo Hong & Mingi Choi & Yonggyun Bae & Jihong Min & Jaeyeob Lee & Donguk Kim & Sehee Bang & Han-Koo Lee & Wonyoung Lee & Jongsup Hong, 2023. "Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst," Nature Communications, Nature, vol. 14(1), pages 1-9, December.
    14. Thieu, Cam-Anh & Ji, Ho-Il & Kim, Hyoungchul & Yoon, Kyung Joong & Lee, Jong-Ho & Son, Ji-Won, 2019. "Palladium incorporation at the anode of thin-film solid oxide fuel cells and its effect on direct utilization of butane fuel at 600 °C," Applied Energy, Elsevier, vol. 243(C), pages 155-164.
    15. Hanchen Tian & Wei Li & Yueh-Lin Lee & Hongkui Zheng & Qingyuan Li & Liang Ma & Debangsu Bhattacharyya & Xiujuan Chen & Dawei Zhang & Guosheng Li & Yi Wang & Li Li & Qingsong Wang & Fang Xia & Muhamme, 2025. "Conformally coated scaffold design using water-tolerant Pr1.8Ba0.2NiO4.1 for protonic ceramic electrochemical cells with 5,000-h electrolysis stability," Nature Energy, Nature, vol. 10(7), pages 890-903, July.
    16. Kai Pei & Yucun Zhou & Kang Xu & Hua Zhang & Yong Ding & Bote Zhao & Wei Yuan & Kotaro Sasaki & YongMan Choi & Yu Chen & Meilin Liu, 2022. "Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells," Nature Communications, Nature, vol. 13(1), pages 1-10, December.
    17. Ling, Yeqing & Huang, Feifan & Wang, Long & Xiao, Guoping & Li, Tao, 2025. "Scaffold-infiltrated self-assembled cathodes for intermediate-low-temperature protonic ceramic fuel cells," Energy, Elsevier, vol. 341(C).
    18. Rasaki, S.A. & Liu, C. & Lao, C. & Zhang, H. & Chen, Z., 2021. "The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    19. Ya, Yuchen & Xu, Yi shu & Elbanna, Ahmed Mohammed & Liu, Yimin & Sun, Boyu & Cheng, Xiaobei, 2025. "Review of direct ammonia solid oxide fuel cells: Low temperature cell structure and ammonia decomposition strategies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 213(C).
    20. Wang, Yujie & Sun, Zhendong & Li, Xiyun & Yang, Xiaoyu & Chen, Zonghai, 2019. "A comparative study of power allocation strategies used in fuel cell and ultracapacitor hybrid systems," Energy, Elsevier, vol. 189(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:268:y:2023:i:c:s0360544222033758. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.