IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v256y2022ics036054422201578x.html
   My bibliography  Save this article

Design and performance study of a rotating piezoelectric wind energy harvesting device with wind turbine structure

Author

Listed:
  • He, Lipeng
  • Han, Yuhang
  • Liu, Renwen
  • Hu, Renhui
  • Yu, Gang
  • Cheng, Guangming

Abstract

This paper proposes a rotating piezoelectric ambient wind energy harvesting device with wind turbine structure (R-PWEH), which mainly consists of wind turbine, support structure, excitation module, and power generation unit. This paper mainly investigates the effect of wind turbines with a different number of fan blades and units with different shapes of power generation on the performance output of R-PWEH. A series of experimental studies were conducted on the R-PWEH in the wind speed range of 0–20 m/s. In the experimental study at a wind speed of 16 m/s, the maximum voltage output of the R-PWEH was 114.24 V when the wind turbine with 11 fan blades and the rectangular cantilever beam power generation unit was installed. The optimal external load at this point is 8 kΩ and the maximum output power is 36.89 mW. The fastest charging rate for the capacitor at this parameter allows for easy powering of multiple light-emitting diodes for illumination. It has good prospects for development in practical applications, such as the ability to power micro and small sensors.

Suggested Citation

  • He, Lipeng & Han, Yuhang & Liu, Renwen & Hu, Renhui & Yu, Gang & Cheng, Guangming, 2022. "Design and performance study of a rotating piezoelectric wind energy harvesting device with wind turbine structure," Energy, Elsevier, vol. 256(C).
    • Handle: RePEc:eee:energy:v:256:y:2022:i:c:s036054422201578x
    DOI: 10.1016/j.energy.2022.124675
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054422201578X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124675?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Na, Yonghyeon & Lee, Min-Seon & Lee, Jung Woo & Jeong, Young Hun, 2020. "Wind energy harvesting from a magnetically coupled piezoelectric bimorph cantilever array based on a dynamic magneto-piezo-elastic structure," Applied Energy, Elsevier, vol. 264(C).
    2. Kumar, Ajeet & Park, Sung Hoon & Patil, Deepak Rajaram & Hwang, Geon-Tae & Ryu, Jungho, 2022. "Effect of aspect ratio of piezoelectric constituents on the energy harvesting performance of magneto-mechano-electric generators," Energy, Elsevier, vol. 239(PB).
    3. Zuo, Wei & Li, Qingqing & He, Zhu & Li, Yawei, 2020. "Numerical investigations on thermal performance enhancement of hydrogen-fueled micro planar combustors with injectors for micro-thermophotovoltaic applications," Energy, Elsevier, vol. 194(C).
    4. Du, Xiaozhen & Zhang, Mi & Chang, Heng & Wang, Yu & Yu, Hong, 2022. "Micro windmill piezoelectric energy harvester based on vortex-induced vibration in tunnel," Energy, Elsevier, vol. 238(PA).
    5. Malla, Ramesh B. & Shrestha, Binu & Bagtzoglou, Amvrossios & Drasdis, Jonathon & Johnson, Paul, 2011. "Hydropower harvesting from a small scale reciprocating system," Renewable Energy, Elsevier, vol. 36(5), pages 1568-1577.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Jian-Xu & Su, Wen-Bin & Li, Ji-Chao & Wang, Chun-Ming, 2022. "A rotational piezoelectric energy harvester based on trapezoid beam: Simulation and experiment," Renewable Energy, Elsevier, vol. 184(C), pages 619-626.
    2. Xie, Xiangdong & Wang, Zijing & Liu, Dezheng & Du, Guofeng & Zhang, Jinfeng, 2020. "An experimental study on a novel cylinder harvester made of L-shaped piezoelectric coupled beams with a high efficiency," Energy, Elsevier, vol. 212(C).
    3. Yonghyeon Na & Min-Seon Lee & Jung Woo Lee & Young Hun Jeong, 2021. "Horizontally Assembled Trapezoidal Piezoelectric Cantilevers Driven by Magnetic Coupling for Rotational Energy Harvester Applications," Energies, MDPI, vol. 14(2), pages 1-16, January.
    4. Li, Zhongjie & Jiang, Xiaomeng & Yin, Peilun & Tang, Lihua & Wu, Hao & Peng, Yan & Luo, Jun & Xie, Shaorong & Pu, Huayan & Wang, Daifeng, 2021. "Towards self-powered technique in underwater robots via a high-efficiency electromagnetic transducer with circularly abrupt magnetic flux density change," Applied Energy, Elsevier, vol. 302(C).
    5. Thanh Tung, Nguyen & Taxil, Gaspard & Nguyen, Hung Hoang & Ducharne, Benjamin & Lallart, Mickaël & Lefeuvre, Elie & Kuwano, Hiroki & Sebald, Gael, 2022. "Ultimate electromechanical energy conversion performance and energy storage capacity of ferroelectric materials under high excitation levels," Applied Energy, Elsevier, vol. 326(C).
    6. Li, Lin & Gu, Zeheng & Xu, Weixin & Tan, Yunfeng & Fan, Xinghua & Tan, Dapeng, 2023. "Mixing mass transfer mechanism and dynamic control of gas-liquid-solid multiphase flow based on VOF-DEM coupling," Energy, Elsevier, vol. 272(C).
    7. Azam, Ali & Ahmed, Ammar & Kamran, Muhammad Sajid & Hai, Li & Zhang, Zutao & Ali, Asif, 2021. "Knowledge structuring for enhancing mechanical energy harvesting (MEH): An in-depth review from 2000 to 2020 using CiteSpace," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    8. Yonghyeon Na & Sahn Nahm & Young Hun Jeong, 2022. "Hammer Impact-Driven Power Generator Using Buzzer-Type Piezoelectric Energy Converter for Wind Power Generator Applications," Energies, MDPI, vol. 15(21), pages 1-16, November.
    9. Yulong Wang & Yaran Lv & Baozhan Lv & Ying Zhang, 2022. "Modeling, Simulation and Analysis of Intermediate Fixed Piezoelectric Energy Harvester," Energies, MDPI, vol. 15(9), pages 1-13, April.
    10. Zuo, Wei & Chen, Zhijie & E, Jiaqiang & Li, Qingqing & Zhang, Guangde & Huang, Yuhan, 2023. "Effects of structure parameters of tube outlet on the performance of a hydrogen-fueled micro planar combustor for thermophotovoltaic applications," Energy, Elsevier, vol. 266(C).
    11. Zuo, Wei & Zhang, Yuntian & Li, Qingqing & Li, Jing & He, Zhu, 2021. "Numerical investigations on hydrogen-fueled micro-cylindrical combustors with cavity for micro-thermophotovoltaic applications," Energy, Elsevier, vol. 223(C).
    12. E, Jiaqiang & Luo, Bo & Han, Dandan & Chen, Jingwei & Liao, Gaoliang & Zhang, Feng & Ding, Jiangjun, 2022. "A comprehensive review on performance improvement of micro energy mechanical system: Heat transfer, micro combustion and energy conversion," Energy, Elsevier, vol. 239(PE).
    13. E, Jiaqiang & Meng, Tian & Chen, Jingwei & Wu, Weiwei & Zhao, Xiaohuan & Zhang, Bin & Peng, Qingguo, 2021. "Effect analysis on performance enhancement of a hydrogen/air non-premixed micro combustor with sudden expansion and contraction structure," Energy, Elsevier, vol. 230(C).
    14. Yang, Xiao & Yang, Wenming & Dong, Shikui & Tan, Heping, 2020. "Flame stability analysis of premixed hydrogen/air mixtures in a swirl micro-combustor," Energy, Elsevier, vol. 209(C).
    15. Gao, Wei & Yan, Yunfei & Shen, Kaiming & Huang, Lujing & Zhao, Ting & Gao, Bo, 2022. "Combustion characteristic of premixed H2/air in the micro cavity combustor with guide vanes," Energy, Elsevier, vol. 239(PA).
    16. Kan, Junwu & Wang, Jin & Wu, Yaqi & Chen, Song & Wang, Shuyun & Jiang, Yonghua & Zhang, Zhonghua, 2022. "Energy harvesting from wind by an axially retractable bracket-shaped piezoelectric vibrator excited by magnetic force," Energy, Elsevier, vol. 240(C).
    17. Zuo, Wei & Wang, Zijie & E, Jiaqiang & Li, Qingqing & Cheng, Qianju & Wu, Yinkun & Zhou, Kun, 2023. "Numerical investigations on the performance of a hydrogen-fueled micro planar combustor with tube outlet for thermophotovoltaic applications," Energy, Elsevier, vol. 263(PC).
    18. Xie, Xiangdong & Wang, Zijing & Zhang, Jiankun & Zhao, Yan & Du, Guofeng & Luo, Mingzhang & Lei, Ming, 2022. "A study on a novel piezoelectric bricks made of double-storey piezoelectric coupled beams," Energy, Elsevier, vol. 250(C).
    19. Piotr Micek & Dariusz Grzybek, 2021. "Experimental Analysis of the Arrays of Macro Fiber Composite Patches for Rotational Piezoelectric Energy Harvesting from a Shaft," Energies, MDPI, vol. 14(16), pages 1-16, August.
    20. Giacomo Cinieri & Donato Fontanarosa & Maria Grazia De Giorgi, 2023. "Combustion Characteristics of Hydrogen/Air Mixtures in a Plasma-Assisted Micro Combustor," Energies, MDPI, vol. 16(5), pages 1-20, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:256:y:2022:i:c:s036054422201578x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.