IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v216y2021ics0360544220323641.html
   My bibliography  Save this article

Two-fluid simulation of moving grate waste incinerator: Comparison of 2D and 3D bed models

Author

Listed:
  • Xia, Zihong
  • Long, Jisheng
  • Yan, Shuai
  • Bai, Li
  • Du, Hailiang
  • Chen, Caixia

Abstract

CFD-based simulation models of large-scale moving grate combustor for biomass and municipal solid waste are not well established. Although a 3D transient two-fluid model provides dynamic coupling between the fuel bed and the freeboard, simulation of a whole incinerator is extremely computational intensive and difficult for industrial applications. In this paper, an efficient computational method is proposed where a 2D bed model is combined with a 3D steady furnace model. In the new approach, the bed model includes a transient two-fluid simulation using realistic grate geometry cut by the incinerator throat, which includes a dynamic coupling of heat and mass transfers between the fuel bed and the lower combustion chamber. The simulated bedtop profiles are then used as inlet conditions to run a 3D steady simulation of turbulent gas combustion for the whole furnace. The simulation results are validated with our previous 3D transient full-incinerator results (Xia et al., 2020) [1] and on-site measurement data. In addition, effects of particle size, waste throughput, and residence time on the bed incineration performance are investigated. Overall, the current computational method highly promotes the efficiency of modelling industrial moving grate combustors.

Suggested Citation

  • Xia, Zihong & Long, Jisheng & Yan, Shuai & Bai, Li & Du, Hailiang & Chen, Caixia, 2021. "Two-fluid simulation of moving grate waste incinerator: Comparison of 2D and 3D bed models," Energy, Elsevier, vol. 216(C).
    • Handle: RePEc:eee:energy:v:216:y:2021:i:c:s0360544220323641
    DOI: 10.1016/j.energy.2020.119257
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220323641
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.119257?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Karim, Md Rezwanul & Bhuiyan, Arafat Ahmed & Sarhan, Abd Alhamid Rafea & Naser, Jamal, 2020. "CFD simulation of biomass thermal conversion under air/oxy-fuel conditions in a reciprocating grate boiler," Renewable Energy, Elsevier, vol. 146(C), pages 1416-1428.
    2. Barroso, Gabriel & Roth, Simon & Nussbaumer, Thomas, 2019. "Investigation of biomass conversion on a moving grate by pyrolysis gas analysis and fuel bed modelling," Energy, Elsevier, vol. 174(C), pages 897-910.
    3. Meng, Xiaoxiao & Sun, Rui & Ismail, Tamer M. & El-Salam, M. Abd & Zhou, Wei & Zhang, Ruihan & Ren, Xiaohan, 2018. "Assessment of primary air on corn straw in a fixed bed combustion using Eulerian-Eulerian approach," Energy, Elsevier, vol. 151(C), pages 501-519.
    4. Gu, Tianbao & Yin, Chungen & Ma, Wenchao & Chen, Guanyi, 2019. "Municipal solid waste incineration in a packed bed: A comprehensive modeling study with experimental validation," Applied Energy, Elsevier, vol. 247(C), pages 127-139.
    5. Costa, Michela & Curcio, Christian & Piazzullo, Daniele & Rocco, Vittorio & Tuccillo, Raffaele, 2018. "RDF incineration modelling trough thermo-chemical conversion and gaseous combustion coupling," Energy, Elsevier, vol. 161(C), pages 974-987.
    6. Costa, M. & Massarotti, N. & Indrizzi, V. & Rajh, B. & Yin, C. & Samec, N., 2014. "Engineering bed models for solid fuel conversion process in grate-fired boilers," Energy, Elsevier, vol. 77(C), pages 244-253.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gu, Tianbao & Ma, Wenchao & Berning, Torsten & Guo, Zhenning & Andersson, Ronnie & Yin, Chungen, 2022. "Advanced simulation of a 750 t/d municipal solid waste grate boiler to better accommodate feedstock changes due to waste classification," Energy, Elsevier, vol. 254(PB).
    2. Yongqi Liang & Jian Tang & Heng Xia & Loai Aljerf & Bingyin Gao & Mulugeta Legesse Akele, 2023. "Three-Dimensional Numerical Modeling and Analysis for the Municipal Solid-Waste Incineration of the Grate Furnace for Particulate-Matter Generation," Sustainability, MDPI, vol. 15(16), pages 1-22, August.
    3. Jing Zhao & Zirui Zhang & Bo Li & Xiaolin Wei, 2021. "Formation and Growth Behavior Analysis of Slagging Rings in Rotary Kiln-Type Hazardous Waste Incineration Systems," Energies, MDPI, vol. 14(22), pages 1-14, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Costa, Michela & Curcio, Christian & Piazzullo, Daniele & Rocco, Vittorio & Tuccillo, Raffaele, 2018. "RDF incineration modelling trough thermo-chemical conversion and gaseous combustion coupling," Energy, Elsevier, vol. 161(C), pages 974-987.
    2. Gu, Tianbao & Ma, Wenchao & Berning, Torsten & Guo, Zhenning & Andersson, Ronnie & Yin, Chungen, 2022. "Advanced simulation of a 750 t/d municipal solid waste grate boiler to better accommodate feedstock changes due to waste classification," Energy, Elsevier, vol. 254(PB).
    3. Garbacz, Przemysław & Wejkowski, Robert, 2020. "Numerical research on the SNCR method in a grate boiler equipped with the innovative FJBS system," Energy, Elsevier, vol. 207(C).
    4. Sedighi, Mohammadreza & Padilla, Ricardo Vasquez & Alamdari, Pedram & Lake, Maree & Rose, Andrew & Izadgoshasb, Iman & Taylor, Robert A., 2020. "A novel high-temperature (>700 °C), volumetric receiver with a packed bed of transparent and absorbing spheres," Applied Energy, Elsevier, vol. 264(C).
    5. Wang, Linzheng & Zhang, Ruizhi & Deng, Ruiqu & Liu, Zeqing & Luo, Yonghao, 2023. "Comprehensive parametric study of fixed-bed co-gasification process through Multiple Thermally Thick Particle (MTTP) model," Applied Energy, Elsevier, vol. 348(C).
    6. Erić, Aleksandar & Cvetinović, Dejan & Milutinović, Nada & Škobalj, Predrag & Bakić, Vukman, 2022. "Combined parametric modelling of biomass devolatilisation process," Renewable Energy, Elsevier, vol. 193(C), pages 13-22.
    7. Meng, Xiaoxiao & Sun, Rui & Ismail, Tamer M. & Zhou, Wei & Ren, Xiaohan & Zhang, Ruihan, 2018. "Parametric studies on corn straw combustion characteristics in a fixed bed: Ash and moisture content," Energy, Elsevier, vol. 158(C), pages 192-203.
    8. Luigi F. Polonini & Domenico Petrocelli & Simone P. Parmigiani & Adriano M. Lezzi, 2019. "Influence on CO and PM Emissions of an Innovative Burner Pot for Pellet Stoves: An Experimental Study," Energies, MDPI, vol. 12(4), pages 1-13, February.
    9. Gu, Tianbao & Fu, Zhufu & Berning, Torsten & Li, Xuantian & Yin, Chungen, 2021. "A simplified kinetic model based on a universal description for solid fuels pyrolysis: Theoretical derivation, experimental validation, and application demonstration," Energy, Elsevier, vol. 225(C).
    10. Halil Akbaş & Gültekin Özdemir, 2020. "An Integrated Prediction and Optimization Model of a Thermal Energy Production System in a Factory Producing Furniture Components," Energies, MDPI, vol. 13(22), pages 1-29, November.
    11. João Silva & Senhorinha Teixeira & José Teixeira, 2023. "A Review of Biomass Thermal Analysis, Kinetics and Product Distribution for Combustion Modeling: From the Micro to Macro Perspective," Energies, MDPI, vol. 16(18), pages 1-23, September.
    12. Meng, Xiaoxiao & Zhou, Wei & Yan, Yonghong & Ren, Xiaohan & Ismail, Tamer M. & Sun, Rui, 2020. "Effects of preheating primary air and fuel size on the combustion characteristics of blended pinewood and corn straw in a fixed bed," Energy, Elsevier, vol. 210(C).
    13. Tanui, J.K. & Kioni, P.N. & Mirre, T. & Nowitzki, M. & Karuri, N.W., 2020. "The influence of particle packing density on wood combustion in a fixed bed under oxy-fuel conditions," Energy, Elsevier, vol. 194(C).
    14. Dan Cudjoe, 2023. "Energy-economics and environmental prospects of integrated waste-to-energy projects in the Beijing-Tianjin-Hebei region," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(11), pages 12597-12628, November.
    15. Igor Donskoy, 2023. "Particle Agglomeration of Biomass and Plastic Waste during Their Thermochemical Fixed-Bed Conversion," Energies, MDPI, vol. 16(12), pages 1-25, June.
    16. Aminmahalati, Alireza & Fazlali, Alireza & Safikhani, Hamed, 2021. "Multi-objective optimization of CO boiler combustion chamber in the RFCC unit using NSGA II algorithm," Energy, Elsevier, vol. 221(C).
    17. Jiao, Long & Kuang, Min & Chen, Yangyang & Liu, Sheng & Wang, Xiu, 2021. "Detailed measurements of in-furnace gas temperature and species concentration distribution regarding the primary-air distribution mode in a spreader and reversal chain-grate furnace," Energy, Elsevier, vol. 235(C).
    18. Valentyna Stanytsina & Volodymyr Artemchuk & Olga Bogoslavska & Artur Zaporozhets & Antonina Kalinichenko & Jan Stebila & Valerii Havrysh & Dariusz Suszanowicz, 2022. "Fossil Fuel and Biofuel Boilers in Ukraine: Trends of Changes in Levelized Cost of Heat," Energies, MDPI, vol. 15(19), pages 1-18, September.
    19. Jiakun Chen & Jian Tang & Heng Xia & Tianzheng Wang & Bingyin Gao, 2023. "A Non-Manipulated Variable Analysis of Solid-Phase Combustion in the Furnace of Municipal Solid-Waste Incineration Process Based on the Biorthogonal Numerical-Simulation Experiment," Sustainability, MDPI, vol. 15(19), pages 1-18, September.
    20. Lim, Jonghun & Kim, Junghwan, 2022. "Optimizing ash deposit removal system to maximize biomass recycling as renewable energy for CO2 reduction," Renewable Energy, Elsevier, vol. 190(C), pages 1006-1017.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:216:y:2021:i:c:s0360544220323641. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.