IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v268y2020ics0306261920305675.html
   My bibliography  Save this article

The impacts of different profiles of the grate inlet conditions on freeboard CFD in a waste wood-fired grate boiler

Author

Listed:
  • Zadravec, Tomas
  • Yin, Chungen
  • Kokalj, Filip
  • Samec, Niko
  • Rajh, Boštjan

Abstract

The common combustion disturbances in the fuel bed in a grate-fired boiler pose a great challenge to accurate modelling of the fuel bed conversion. Therefore, it is difficult to describe the lengthwise profiles of the combustibles leaving the fuel bed into the freeboard accurately. This paper investigates how different fuel bed models or grate inlet profiles will affect the Computational Fluid Dynamics simulation of combustion in the freeboard in industrial grate boilers. Two grate inlet conditions, which are very different in the profiles along the grate but yield the same total mass, momentum, species and energy fluxes into the freeboard, are used in the freeboard simulation of a 13 MWth grate boiler, respectively. The key findings from the comparison between the simulation results and measurement data are as follows. Firstly, the fuel bed model or grate inlet condition accounting for the realistic lengthwise biomass conversion pattern can be used reliably for the simulation of a grate boiler and simulation-based boiler optimisation. Secondly, the impacts of different fuel bed models or different profiles of the grate inlet conditions are virtually restricted only to the vicinity of the fuel bed or in the primary combustion chamber. After the secondary combustion chamber in which up-flowing gas is mixed well with the secondary and tertiary air jets, the simulation results are close to each other. For more general and reliable applications, a comprehensive bed model resolving the mixing, reactions, heat and mass transfer in the fuel bed, is needed and under development.

Suggested Citation

  • Zadravec, Tomas & Yin, Chungen & Kokalj, Filip & Samec, Niko & Rajh, Boštjan, 2020. "The impacts of different profiles of the grate inlet conditions on freeboard CFD in a waste wood-fired grate boiler," Applied Energy, Elsevier, vol. 268(C).
    • Handle: RePEc:eee:appene:v:268:y:2020:i:c:s0306261920305675
    DOI: 10.1016/j.apenergy.2020.115055
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920305675
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.115055?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fournel, S. & Palacios, J.H. & Morissette, R. & Villeneuve, J. & Godbout, S. & Heitz, M. & Savoie, P., 2015. "Influence of biomass properties on technical and environmental performance of a multi-fuel boiler during on-farm combustion of energy crops," Applied Energy, Elsevier, vol. 141(C), pages 247-259.
    2. Nunes, L.J.R. & Matias, J.C.O. & Catalão, J.P.S., 2014. "Mixed biomass pellets for thermal energy production: A review of combustion models," Applied Energy, Elsevier, vol. 127(C), pages 135-140.
    3. Symonds, Robert T. & Hughes, Robin W. & De Las Obras Loscertales, Margarita, 2020. "Oxy-pressurized fluidized bed combustion: Configuration and options analysis," Applied Energy, Elsevier, vol. 262(C).
    4. Costa, M. & Massarotti, N. & Indrizzi, V. & Rajh, B. & Yin, C. & Samec, N., 2014. "Engineering bed models for solid fuel conversion process in grate-fired boilers," Energy, Elsevier, vol. 77(C), pages 244-253.
    5. Di Maria, Francesco & Sisani, Federico & Contini, Stefano, 2018. "Are EU waste-to-energy technologies effective for exploiting the energy in bio-waste?," Applied Energy, Elsevier, vol. 230(C), pages 1557-1572.
    6. Tsiliyannis, Christos A., 2019. "Energy from waste: Plant design and control options for high efficiency and emissions’ compliance under waste variability," Energy, Elsevier, vol. 176(C), pages 34-57.
    7. Tu, Yaojie & Zhou, Anqi & Xu, Mingchen & Yang, Wenming & Siah, Keng Boon & Subbaiah, Prabakaran, 2018. "NOX reduction in a 40 t/h biomass fired grate boiler using internal flue gas recirculation technology," Applied Energy, Elsevier, vol. 220(C), pages 962-973.
    8. Ripa, M. & Fiorentino, G. & Giani, H. & Clausen, A. & Ulgiati, S., 2017. "Refuse recovered biomass fuel from municipal solid waste. A life cycle assessment," Applied Energy, Elsevier, vol. 186(P2), pages 211-225.
    9. Pelletier, Chloé & Rogaume, Yann & Dieckhoff, Léa & Bardeau, Guillaume & Pons, Marie-Noëlle & Dufour, Anthony, 2019. "Effect of combustion technology and biogenic CO2 impact factor on global warming potential of wood-to-heat chains," Applied Energy, Elsevier, vol. 235(C), pages 1381-1388.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gu, Tianbao & Ma, Wenchao & Berning, Torsten & Guo, Zhenning & Andersson, Ronnie & Yin, Chungen, 2022. "Advanced simulation of a 750 t/d municipal solid waste grate boiler to better accommodate feedstock changes due to waste classification," Energy, Elsevier, vol. 254(PB).
    2. Álvarez-Bermúdez, César & Anca-Couce, Andrés & Chapela, Sergio & Scharler, Robert & Buchmayr, Markus & Gómez, Miguel Ángel & Porteiro, Jacobo, 2023. "Validation of a biomass conversion mechanism by Eulerian modelling of a fixed-bed system under low primary air conditions," Renewable Energy, Elsevier, vol. 215(C).
    3. Ma, Junfang & Liu, Jiaxun & Jiang, Xiumin & Zhang, Hai, 2021. "A two-dimensional distributed activation energy model for pyrolysis of solid fuels," Energy, Elsevier, vol. 230(C).
    4. Liu, Xiaozhou & Zhu, Guangyu & Asim, Taimoor & Mishra, Rakesh, 2022. "Application of momentum flux method for the design of an α-shaped flame incinerator fueled with two-component solid waste," Energy, Elsevier, vol. 248(C).
    5. Laubscher, Ryno & De Villiers, Etienne, 2021. "Integrated mathematical modelling of a 105 t/h biomass fired industrial watertube boiler system with varying fuel moisture content," Energy, Elsevier, vol. 228(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Grzegorz Maj, 2018. "Emission Factors and Energy Properties of Agro and Forest Biomass in Aspect of Sustainability of Energy Sector," Energies, MDPI, vol. 11(6), pages 1-12, June.
    2. Hrabec, Dušan & Šomplák, Radovan & Nevrlý, Vlastimír & Viktorin, Adam & Pluháček, Michal & Popela, Pavel, 2020. "Sustainable waste-to-energy facility location: Influence of demand on energy sales," Energy, Elsevier, vol. 207(C).
    3. Caposciutti, Gianluca & Barontini, Federica & Antonelli, Marco & Tognotti, Leonardo & Desideri, Umberto, 2018. "Experimental investigation on the air excess and air displacement influence on early stage and complete combustion gaseous emissions of a small scale fixed bed biomass boiler," Applied Energy, Elsevier, vol. 216(C), pages 576-587.
    4. Yang, Wei & Zhu, Youjian & Cheng, Wei & Sang, Huiying & Xu, Hanshen & Yang, Haiping & Chen, Hanping, 2018. "Effect of minerals and binders on particulate matter emission from biomass pellets combustion," Applied Energy, Elsevier, vol. 215(C), pages 106-115.
    5. Tu, Yaojie & Zhou, Anqi & Xu, Mingchen & Yang, Wenming & Siah, Keng Boon & Subbaiah, Prabakaran, 2018. "NOX reduction in a 40 t/h biomass fired grate boiler using internal flue gas recirculation technology," Applied Energy, Elsevier, vol. 220(C), pages 962-973.
    6. Garbacz, Przemysław & Wejkowski, Robert, 2020. "Numerical research on the SNCR method in a grate boiler equipped with the innovative FJBS system," Energy, Elsevier, vol. 207(C).
    7. Schulzke, T. & Westermeyer, J. & Giani, H. & Hornsby, C., 2018. "Combustion of Refined Renewable Biomass Fuel (RRBF) in a bubbling fluidized bed," Renewable Energy, Elsevier, vol. 124(C), pages 84-94.
    8. Xiao, Zhihua & Yuan, Xingzhong & Jiang, Longbo & Chen, Xiaohong & Li, Hui & Zeng, Guangming & Leng, Lijian & Wang, Hou & Huang, Huajun, 2015. "Energy recovery and secondary pollutant emission from the combustion of co-pelletized fuel from municipal sewage sludge and wood sawdust," Energy, Elsevier, vol. 91(C), pages 441-450.
    9. Tu, Yaojie & Xu, Shunta & Xu, Mingchen & Liu, Hao & Yang, Wenming, 2020. "Numerical study of methane combustion under moderate or intense low-oxygen dilution regime at elevated pressure conditions up to 8 atm," Energy, Elsevier, vol. 197(C).
    10. Xuejun Qian & Jingwen Xue & Yulai Yang & Seong W. Lee, 2021. "Thermal Properties and Combustion-Related Problems Prediction of Agricultural Crop Residues," Energies, MDPI, vol. 14(15), pages 1-18, July.
    11. Nunes, L.J.R. & Matias, J.C.O. & Catalão, J.P.S., 2016. "Wood pellets as a sustainable energy alternative in Portugal," Renewable Energy, Elsevier, vol. 85(C), pages 1011-1016.
    12. Shibo Wu & Jiannan Chen & Daoping Peng & Zheng Wu & Qin Li & Tao Huang, 2019. "Effects of Water Leaching on the Ash Sintering Problems of Wheat Straw," Energies, MDPI, vol. 12(3), pages 1-14, January.
    13. Wang, Liang & Skreiberg, Øyvind & Becidan, Michael & Li, Hailong, 2016. "Investigation of rye straw ash sintering characteristics and the effect of additives," Applied Energy, Elsevier, vol. 162(C), pages 1195-1204.
    14. Luigi F. Polonini & Domenico Petrocelli & Simone P. Parmigiani & Adriano M. Lezzi, 2019. "Influence on CO and PM Emissions of an Innovative Burner Pot for Pellet Stoves: An Experimental Study," Energies, MDPI, vol. 12(4), pages 1-13, February.
    15. Theppitak, Sarut & Hungwe, Douglas & Ding, Lu & Xin, Dai & Yu, Guangsuo & Yoshikawa, Kunio, 2020. "Comparison on solid biofuel production from wet and dry carbonization processes of food wastes," Applied Energy, Elsevier, vol. 272(C).
    16. Chen, Hui & Wang, Jie & Zheng, Yanli & Zhan, Jiao & He, Chenliu & Wang, Qiang, 2018. "Algal biofuel production coupled bioremediation of biomass power plant wastes based on Chlorella sp. C2 cultivation," Applied Energy, Elsevier, vol. 211(C), pages 296-305.
    17. Chen, Guanyi & Wenga, Terrence & Ma, Wenchao & Lin, Fawei, 2019. "Theoretical and experimental study of gas-phase corrosion attack of Fe under simulated municipal solid waste combustion: Influence of KCl, SO2, HCl, and H2O vapour," Applied Energy, Elsevier, vol. 247(C), pages 630-642.
    18. Ren, Shoujun & Yang, Haolin & Wang, Xiaohan, 2021. "The oxygen-deficient combustion and its effect on the NOx emission in a localized stratified vortex-tube combustor," Energy, Elsevier, vol. 235(C).
    19. Alicja Słomka & Małgorzata Pawłowska, 2024. "Catch and Cover Crops’ Use in the Energy Sector via Conversion into Biogas—Potential Benefits and Disadvantages," Energies, MDPI, vol. 17(3), pages 1-25, January.
    20. Joanna Szyszlak-Bargłowicz & Jacek Wasilewski & Grzegorz Zając & Andrzej Kuranc & Adam Koniuszy & Małgorzata Hawrot-Paw, 2022. "Evaluation of Particulate Matter (PM) Emissions from Combustion of Selected Types of Rapeseed Biofuels," Energies, MDPI, vol. 16(1), pages 1-15, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:268:y:2020:i:c:s0306261920305675. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.