IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v191y2020ics0360544219320456.html
   My bibliography  Save this article

Maximizing specific work output extracted from engine exhaust with novel inverted Brayton cycles over a large range of operating conditions

Author

Listed:
  • Chagnon-Lessard, Noémie
  • Copeland, Colin
  • Mathieu-Potvin, François
  • Gosselin, Louis

Abstract

The heat contained in internal combustion engine exhaust gases can be converted into mechanical energy by using an Inverted Brayton Cycle (IBC). In this paper, five different IBC versions are numerically modeled and optimized to maximize their specific work output: (i) basic IBC, (ii) IBC with liquid water drainage (IBC/D), (iii) IBC with liquid water drainage and a steam turbine (IBC/D/S), (iv) IBC with liquid water drainage and a refrigeration cycle (IBC/D/R), and (v) IBC with liquid water drainage, a steam turbine and a refrigeration cycle (IBC/D/S/R). The three latter cycles are presented for the first time in literature. The optimization is performed for a wide range of inlet gases temperatures (600–1200 K) and heat sink temperatures (280–340 K). Among the five IBCs, the IBC/D/S/R has the highest specific work output for the whole range of operating temperatures. A comparison with the subcritical Rankine cycle and Organic Rankine Cycles using isobutane and benzene shows that an IBC system might be a better choice for specific operating temperatures. Liquid water addition in the IBC/D/S/R leads to optimized designs using only the steam turbine at high inlet gas temperatures, indicating that a Rankine cycle is better suited for these conditions.

Suggested Citation

  • Chagnon-Lessard, Noémie & Copeland, Colin & Mathieu-Potvin, François & Gosselin, Louis, 2020. "Maximizing specific work output extracted from engine exhaust with novel inverted Brayton cycles over a large range of operating conditions," Energy, Elsevier, vol. 191(C).
    • Handle: RePEc:eee:energy:v:191:y:2020:i:c:s0360544219320456
    DOI: 10.1016/j.energy.2019.116350
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219320456
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116350?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hoang, Anh Tuan, 2018. "Waste heat recovery from diesel engines based on Organic Rankine Cycle," Applied Energy, Elsevier, vol. 231(C), pages 138-166.
    2. Scaccabarozzi, Roberto & Tavano, Michele & Invernizzi, Costante Mario & Martelli, Emanuele, 2018. "Comparison of working fluids and cycle optimization for heat recovery ORCs from large internal combustion engines," Energy, Elsevier, vol. 158(C), pages 396-416.
    3. Larsen, Ulrik & Sigthorsson, Oskar & Haglind, Fredrik, 2014. "A comparison of advanced heat recovery power cycles in a combined cycle for large ships," Energy, Elsevier, vol. 74(C), pages 260-268.
    4. Vaja, Iacopo & Gambarotta, Agostino, 2010. "Internal Combustion Engine (ICE) bottoming with Organic Rankine Cycles (ORCs)," Energy, Elsevier, vol. 35(2), pages 1084-1093.
    5. Bianchi, M. & De Pascale, A., 2011. "Bottoming cycles for electric energy generation: Parametric investigation of available and innovative solutions for the exploitation of low and medium temperature heat sources," Applied Energy, Elsevier, vol. 88(5), pages 1500-1509, May.
    6. Zilio, Claudio & Brown, J. Steven & Schiochet, Giovanni & Cavallini, Alberto, 2011. "The refrigerant R1234yf in air conditioning systems," Energy, Elsevier, vol. 36(10), pages 6110-6120.
    7. Uusitalo, Antti & Ameli, Alireza & Turunen-Saaresti, Teemu, 2019. "Thermodynamic and turbomachinery design analysis of supercritical Brayton cycles for exhaust gas heat recovery," Energy, Elsevier, vol. 167(C), pages 60-79.
    8. Mito, Mohamed T. & Teamah, Mohamed A. & El-Maghlany, Wael M. & Shehata, Ali I., 2018. "Utilizing the scavenge air cooling in improving the performance of marine diesel engine waste heat recovery systems," Energy, Elsevier, vol. 142(C), pages 264-276.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Matsui, Kohei & Lin, Jie & Thu, Kyaw & Miyazaki, Takahiko, 2022. "On the performance improvement of an inverted Brayton Cycle using a regenerative heat and mass exchanger," Energy, Elsevier, vol. 249(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Ligeng & Tian, Hua & Shi, Lingfeng & Wang, Jingyu & Li, Min & Shu, Gequn, 2021. "Adaptive flow assignment for CO2 transcritical power cycle (CTPC): An engine operational profile-based off-design study," Energy, Elsevier, vol. 225(C).
    2. Zhu, Sipeng & Zhang, Kun & Deng, Kangyao, 2020. "A review of waste heat recovery from the marine engine with highly efficient bottoming power cycles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 120(C).
    3. Le Brun, Niccolo & Simpson, Michael & Acha, Salvador & Shah, Nilay & Markides, Christos N., 2020. "Techno-economic potential of low-temperature, jacket-water heat recovery from stationary internal combustion engines with organic Rankine cycles: A cross-sector food-retail study," Applied Energy, Elsevier, vol. 274(C).
    4. Yu, Xiaoli & Li, Zhi & Lu, Yiji & Huang, Rui & Roskilly, Anthony Paul, 2019. "Investigation of organic Rankine cycle integrated with double latent thermal energy storage for engine waste heat recovery," Energy, Elsevier, vol. 170(C), pages 1098-1112.
    5. Alklaibi, A.M. & Lior, N., 2021. "Waste heat utilization from internal combustion engines for power augmentation and refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    6. Zhu, Sipeng & Ma, Zetai & Zhang, Kun & Deng, Kangyao, 2020. "Energy and exergy analysis of the combined cycle power plant recovering waste heat from the marine two-stroke engine under design and off-design conditions," Energy, Elsevier, vol. 210(C).
    7. Jiménez-Arreola, Manuel & Wieland, Christoph & Romagnoli, Alessandro, 2019. "Direct vs indirect evaporation in Organic Rankine Cycle (ORC) systems: A comparison of the dynamic behavior for waste heat recovery of engine exhaust," Applied Energy, Elsevier, vol. 242(C), pages 439-452.
    8. Di Battista, D. & Fatigati, F. & Carapellucci, R. & Cipollone, R., 2019. "Inverted Brayton Cycle for waste heat recovery in reciprocating internal combustion engines," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    9. Xia, Jiaxi & Wang, Jiangfeng & Lou, Juwei & Hu, Jianjun & Yao, Sen, 2023. "Thermodynamic, economic, environmental analysis and multi-objective optimization of a novel combined cooling and power system for cascade utilization of engine waste heat," Energy, Elsevier, vol. 277(C).
    10. Yu, Guopeng & Shu, Gequn & Tian, Hua & Wei, Haiqiao & Liu, Lina, 2013. "Simulation and thermodynamic analysis of a bottoming Organic Rankine Cycle (ORC) of diesel engine (DE)," Energy, Elsevier, vol. 51(C), pages 281-290.
    11. Scaccabarozzi, Roberto & Tavano, Michele & Invernizzi, Costante Mario & Martelli, Emanuele, 2018. "Comparison of working fluids and cycle optimization for heat recovery ORCs from large internal combustion engines," Energy, Elsevier, vol. 158(C), pages 396-416.
    12. Surendran, Anandu & Seshadri, Satyanarayanan, 2020. "Design and performance analysis of a novel Transcritical Regenerative Series Two stage Organic Rankine Cycle for dual source waste heat recovery," Energy, Elsevier, vol. 203(C).
    13. Zhang, Ye-Qiang & Wu, Yu-Ting & Xia, Guo-Dong & Ma, Chong-Fang & Ji, Wei-Ning & Liu, Shan-Wei & Yang, Kai & Yang, Fu-Bin, 2014. "Development and experimental study on organic Rankine cycle system with single-screw expander for waste heat recovery from exhaust of diesel engine," Energy, Elsevier, vol. 77(C), pages 499-508.
    14. Galuppo, Francesco & Reiche, Thomas & Lemort, Vincent & Dufour, Pascal & Nadri, Madiha, 2021. "Organic Rankine Cycle based waste heat recovery modeling and control of the low pressure side using direct condensation and dedicated fans," Energy, Elsevier, vol. 216(C).
    15. Mat Nawi, Z. & Kamarudin, S.K. & Sheikh Abdullah, S.R. & Lam, S.S., 2019. "The potential of exhaust waste heat recovery (WHR) from marine diesel engines via organic rankine cycle," Energy, Elsevier, vol. 166(C), pages 17-31.
    16. Zhijian Wang & Hua Tian & Lingfeng Shi & Gequn Shu & Xianghua Kong & Ligeng Li, 2020. "Fluid Selection of Transcritical Rankine Cycle for Engine Waste Heat Recovery Based on Temperature Match Method," Energies, MDPI, vol. 13(7), pages 1-19, April.
    17. Yılmaz, Alper, 2015. "Transcritical organic Rankine vapor compression refrigeration system for intercity bus air-conditioning using engine exhaust heat," Energy, Elsevier, vol. 82(C), pages 1047-1056.
    18. Liu, Peng & Shu, Gequn & Tian, Hua, 2019. "How to approach optimal practical Organic Rankine cycle (OP-ORC) by configuration modification for diesel engine waste heat recovery," Energy, Elsevier, vol. 174(C), pages 543-552.
    19. Xie, Hui & Yang, Can, 2013. "Dynamic behavior of Rankine cycle system for waste heat recovery of heavy duty diesel engines under driving cycle," Applied Energy, Elsevier, vol. 112(C), pages 130-141.
    20. Bracco, Roberto & Clemente, Stefano & Micheli, Diego & Reini, Mauro, 2013. "Experimental tests and modelization of a domestic-scale ORC (Organic Rankine Cycle)," Energy, Elsevier, vol. 58(C), pages 107-116.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:191:y:2020:i:c:s0360544219320456. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.