IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v187y2019ics0360544219316408.html
   My bibliography  Save this article

Influence of herbaceous biomass ash pre-treated by alkali metal leaching on the agglomeration/sintering and corrosion behaviors

Author

Listed:
  • Namkung, Hueon
  • Lee, Young-Joo
  • Park, Ju-Hyoung
  • Song, Gyu-Seob
  • Choi, Jong Won
  • Kim, Joeng-Geun
  • Park, Se-Joon
  • Park, Joo Chang
  • Kim, Hyung-Taek
  • Choi, Young-Chan

Abstract

Partially melted ash particles cause increased ash fouling, agglomeration and sintering behaviors during biomass combustion. In addition, ash fouling facilitates the corrosion behavior of stainless steel. In this work, the agglomeration/sintering and corrosion behaviors of untreated herbaceous biomass ash and that pre-treated by an alkali metal leaching reaction were investigated under combustion conditions. Although the ash agglomeration tendency increased with increasing temperature, the tendency was reduced by alkali metal leaching pre-treatment. During comparison of sintering behavior, the degree of sintering (x/r) increased as a function of time but was substantially alleviated by alkali metal leaching pre-treatment. In comparison to the typical Frenkel sintering model, a modified Frenkel sintering model was shown to fit well with the experimental sintering behavior. Alkali metal leaching pre-treatment inhibited ash particle adhesion and made high melting temperature minerals, which was verified by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD) analysis, the use of ternary mineral phase diagrams and adoption of a new chemical classification system. Furthermore, from SEM-EDX, alkali metal leaching pre-treatment was seen to reduce the corrosion by ash fouling on stainless steel (SUS) 316. Resultingly, the alkali metal leaching pre-treatment significantly alleviated the ash adhesion and corrosion behaviors.

Suggested Citation

  • Namkung, Hueon & Lee, Young-Joo & Park, Ju-Hyoung & Song, Gyu-Seob & Choi, Jong Won & Kim, Joeng-Geun & Park, Se-Joon & Park, Joo Chang & Kim, Hyung-Taek & Choi, Young-Chan, 2019. "Influence of herbaceous biomass ash pre-treated by alkali metal leaching on the agglomeration/sintering and corrosion behaviors," Energy, Elsevier, vol. 187(C).
    • Handle: RePEc:eee:energy:v:187:y:2019:i:c:s0360544219316408
    DOI: 10.1016/j.energy.2019.115950
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219316408
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.115950?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fournel, S. & Palacios, J.H. & Morissette, R. & Villeneuve, J. & Godbout, S. & Heitz, M. & Savoie, P., 2015. "Influence of biomass properties on technical and environmental performance of a multi-fuel boiler during on-farm combustion of energy crops," Applied Energy, Elsevier, vol. 141(C), pages 247-259.
    2. Chin, K.L. & H'ng, P.S. & Paridah, M.T. & Szymona, K. & Maminski, M. & Lee, S.H. & Lum, W.C. & Nurliyana, M.Y. & Chow, M.J. & Go, W.Z., 2015. "Reducing ash related operation problems of fast growing timber species and oil palm biomass for combustion applications using leaching techniques," Energy, Elsevier, vol. 90(P1), pages 622-630.
    3. McIlveen-Wright, David R. & Huang, Ye & Rezvani, Sina & Redpath, David & Anderson, Mark & Dave, Ashok & Hewitt, Neil J., 2013. "A technical and economic analysis of three large scale biomass combustion plants in the UK," Applied Energy, Elsevier, vol. 112(C), pages 396-404.
    4. Roy, Murari Mohon & Dutta, Animesh & Corscadden, Kenny, 2013. "An experimental study of combustion and emissions of biomass pellets in a prototype pellet furnace," Applied Energy, Elsevier, vol. 108(C), pages 298-307.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hariana, & Ghazidin, Hafizh & Putra, Hanafi Prida & Darmawan, Arif & Prabowo, & Hilmawan, Edi & Aziz, Muhammad, 2023. "The effects of additives on deposit formation during co-firing of high-sodium coal with high-potassium and -chlorine biomass," Energy, Elsevier, vol. 271(C).
    2. Mu, Lin & Li, Tong & Wang, Zhen & Shang, Yan & Yin, Hongchao, 2021. "Influence of water/acid washing pretreatment of aquatic biomass on ash transformation and slagging behavior during co-firing with bituminous coal," Energy, Elsevier, vol. 234(C).
    3. Wan, Kaidi & Vervisch, Luc & Gao, Zhenxun & Domingo, Pascale & Jiang, Chongwen & Xia, Jun & Wang, Zhihua, 2020. "Development of reduced and optimized reaction mechanism for potassium emissions during biomass combustion based on genetic algorithms," Energy, Elsevier, vol. 211(C).
    4. Munawar, Muhammad Assad & Khoja, Asif Hussain & Naqvi, Salman Raza & Mehran, Muhammad Taqi & Hassan, Muhammad & Liaquat, Rabia & Dawood, Usama Fida, 2021. "Challenges and opportunities in biomass ash management and its utilization in novel applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    5. Liu, Zhongyi & Jin, Jing & Zheng, Liangqian & Zhang, Ruipu & Dong, Bo & Liang, Guowei & Zhai, Zhongyuan, 2023. "Adhesion strength of straw biomass ash: Effect of dolomite additive," Energy, Elsevier, vol. 262(PA).
    6. Tabakaev, Roman & Ibraeva, Kanipa & Kan, Victor & Dubinin, Yury & Rudmin, Maksim & Yazykov, Nikolay & Zavorin, Alexander, 2020. "The effect of co-combustion of waste from flour milling and highly mineralized peat on sintering of the ash residue," Energy, Elsevier, vol. 196(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Hui & Wang, Jie & Zheng, Yanli & Zhan, Jiao & He, Chenliu & Wang, Qiang, 2018. "Algal biofuel production coupled bioremediation of biomass power plant wastes based on Chlorella sp. C2 cultivation," Applied Energy, Elsevier, vol. 211(C), pages 296-305.
    2. Caposciutti, Gianluca & Barontini, Federica & Antonelli, Marco & Tognotti, Leonardo & Desideri, Umberto, 2018. "Experimental investigation on the air excess and air displacement influence on early stage and complete combustion gaseous emissions of a small scale fixed bed biomass boiler," Applied Energy, Elsevier, vol. 216(C), pages 576-587.
    3. Wöhler, Marius & Jaeger, Dirk & Reichert, Gabriel & Schmidl, Christoph & Pelz, Stefan K., 2017. "Influence of pellet length on performance of pellet room heaters under real life operation conditions," Renewable Energy, Elsevier, vol. 105(C), pages 66-75.
    4. Duong, Van Minh & Flener, Ursula & Hrbek, Jitka & Hofbauer, Hermann, 2022. "Emission characteristics from the combustion of Acacia Mangium in the automatic feeding pellet stove," Renewable Energy, Elsevier, vol. 186(C), pages 183-194.
    5. Nunes, L.J.R. & Matias, J.C.O. & Catalão, J.P.S., 2017. "Biomass in the generation of electricity in Portugal: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 373-378.
    6. Tokarski, Stanisław & Głód, Krzysztof & Ściążko, Marek & Zuwała, Jarosław, 2015. "Comparative assessment of the energy effects of biomass combustion and co-firing in selected technologies," Energy, Elsevier, vol. 92(P1), pages 24-32.
    7. Cambero, Claudia & Sowlati, Taraneh, 2014. "Assessment and optimization of forest biomass supply chains from economic, social and environmental perspectives – A review of literature," Renewable and Sustainable Energy Reviews, Elsevier, vol. 36(C), pages 62-73.
    8. Yang, Bo & Wei, Yi-Ming & Hou, Yunbing & Li, Hui & Wang, Pengtao, 2019. "Life cycle environmental impact assessment of fuel mix-based biomass co-firing plants with CO2 capture and storage," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    9. Xuejun Qian & Jingwen Xue & Yulai Yang & Seong W. Lee, 2021. "Thermal Properties and Combustion-Related Problems Prediction of Agricultural Crop Residues," Energies, MDPI, vol. 14(15), pages 1-18, July.
    10. Shibo Wu & Jiannan Chen & Daoping Peng & Zheng Wu & Qin Li & Tao Huang, 2019. "Effects of Water Leaching on the Ash Sintering Problems of Wheat Straw," Energies, MDPI, vol. 12(3), pages 1-14, January.
    11. Jozami, Emiliano & Mele, Fernando D & Piastrellini, Roxana & Civit, Bárbara M & Feldman, Susana R, 2022. "Life cycle assessment of bioenergy from lignocellulosic herbaceous biomass: The case study of Spartina argentinensis," Energy, Elsevier, vol. 254(PA).
    12. Pontes, Rita & Romaní, Aloia & Michelin, Michele & Domingues, Lucília & Teixeira, José & Nunes, João, 2018. "Comparative autohydrolysis study of two mixtures of forest and marginal land resources for co-production of biofuels and value-added compounds," Renewable Energy, Elsevier, vol. 128(PA), pages 20-29.
    13. Peng, Valerie & Slocum, Alexander, 2020. "Endemic Water and Storm Trash to energy via in-situ processing," Renewable and Sustainable Energy Reviews, Elsevier, vol. 134(C).
    14. Araceli Regueiro & Lucie Jezerská & David Patiño & Raquel Pérez-Orozco & Jan Nečas & Martin Žídek, 2017. "Experimental Study of the Viability of Low-Grade Biofuels in Small-Scale Appliances," Sustainability, MDPI, vol. 9(10), pages 1-16, October.
    15. Huang, Y. & Wang, Y.D. & Chen, Haisheng & Zhang, Xinjing & Mondol, J. & Shah, N. & Hewitt, N.J., 2017. "Performance analysis of biofuel fired trigeneration systems with energy storage for remote households," Applied Energy, Elsevier, vol. 186(P3), pages 530-538.
    16. Heredia Salgado, Mario A. & Tarelho, Luís A.C. & Rivadeneira, Daniel & Ramírez, Valeria & Sinche, Danny, 2020. "Energetic valorization of the residual biomass produced during Jatropha curcas oil extraction," Renewable Energy, Elsevier, vol. 146(C), pages 1640-1648.
    17. Grzegorz Maj, 2018. "Emission Factors and Energy Properties of Agro and Forest Biomass in Aspect of Sustainability of Energy Sector," Energies, MDPI, vol. 11(6), pages 1-12, June.
    18. Joanna Szyszlak-Bargłowicz & Jacek Wasilewski & Grzegorz Zając & Andrzej Kuranc & Adam Koniuszy & Małgorzata Hawrot-Paw, 2022. "Evaluation of Particulate Matter (PM) Emissions from Combustion of Selected Types of Rapeseed Biofuels," Energies, MDPI, vol. 16(1), pages 1-15, December.
    19. Nunes, L.J.R. & Matias, J.C.O. & Catalão, J.P.S., 2016. "Biomass combustion systems: A review on the physical and chemical properties of the ashes," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 235-242.
    20. Abubackar, Haris Nalakath & Bengelsdorf, Frank R. & Dürre, Peter & Veiga, María C. & Kennes, Christian, 2016. "Improved operating strategy for continuous fermentation of carbon monoxide to fuel-ethanol by clostridia," Applied Energy, Elsevier, vol. 169(C), pages 210-217.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:187:y:2019:i:c:s0360544219316408. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.