IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v176y2019icp23-33.html
   My bibliography  Save this article

Experimental investigation on model predictive control of radiant floor cooling combined with underfloor ventilation system

Author

Listed:
  • Zhang, Dongliang
  • Cai, Ning
  • Cui, Xiaobo
  • Xia, Xueying
  • Shi, Jianzhong
  • Huang, Xiaoqing

Abstract

Energy saving potential of radiant floor cooling combined with underfloor ventilation (RFCUV) system has been restricted by its control problems. Existing conventional control methods of radiant cooling system have several disadvantages, such as control lag, poor control performance, and low economy, etc. The objectives of this study were to: (i) build a dynamic simplified model and validate its precision experimentally; (ii) implement advanced model predictive control (MPC) on RFCUV system; and (iii) demonstrate MPC control performance by comparing with existing conventional proportional-integral-derivative (PID) experimentally. Experimental results indicated that under experimental step setpoint variations, the adjusting time of indoor air temperature or operative temperature was only 12 min with MPC controller, and was 30 min with PID controller; it took only 1 min to reach recommended thermal comfort range with MPC controller, and 17 min with PID controller. During 9:00 to 17:00 in typical design day of Nanjing city, compared with PID controller, MPC controller yielded 17.5% energy saving when maintaining equal or better indoor comfort. Thus, compared with PID, MPC demonstrated the advantages of rapid responses, good stability and excellent energy saving effect in RFCUV system.

Suggested Citation

  • Zhang, Dongliang & Cai, Ning & Cui, Xiaobo & Xia, Xueying & Shi, Jianzhong & Huang, Xiaoqing, 2019. "Experimental investigation on model predictive control of radiant floor cooling combined with underfloor ventilation system," Energy, Elsevier, vol. 176(C), pages 23-33.
  • Handle: RePEc:eee:energy:v:176:y:2019:i:c:p:23-33
    DOI: 10.1016/j.energy.2019.03.102
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219305067
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2019.03.102?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Antonopoulos, K.A. & Tzivanidis, C., 1997. "Numerical solution of unsteady three-dimensional heat transfer during space cooling using ceiling-embedded piping," Energy, Elsevier, vol. 22(1), pages 59-67.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Brown, Sarah & Beausoleil-Morrison, Ian, 2023. "Long-term implementation of a model predictive controller for a hydronic floor heating and cooling system in a highly glazed house in Canada," Applied Energy, Elsevier, vol. 349(C).
    2. María M. Villar-Ramos & Iván Hernández-Pérez & Karla M. Aguilar-Castro & Ivett Zavala-Guillén & Edgar V. Macias-Melo & Irving Hernández-López & Juan Serrano-Arellano, 2022. "A Review of Thermally Activated Building Systems (TABS) as an Alternative for Improving the Indoor Environment of Buildings," Energies, MDPI, vol. 15(17), pages 1-31, August.
    3. Wan, Xin & Luo, Xiong-Lin, 2020. "Economic optimization of chemical processes based on zone predictive control with redundancy variables," Energy, Elsevier, vol. 212(C).
    4. Dongsu Kim & Jongman Lee & Sunglok Do & Pedro J. Mago & Kwang Ho Lee & Heejin Cho, 2022. "Energy Modeling and Model Predictive Control for HVAC in Buildings: A Review of Current Research Trends," Energies, MDPI, vol. 15(19), pages 1-30, October.
    5. Duan, Mengfan & Sun, Hongli & Wu, Shuangdui & Wu, Yifan & Lin, Borong, 2023. "A simplified model for the evaluation and comparison of the dynamic performance of different heating terminal types," Energy, Elsevier, vol. 263(PD).
    6. Xie, Xing & Xia, Fei & Zhao, Yu-qian & Xu, Bin & Wang, Yang-liang & Pei, Gang, 2022. "Parametric study on the effect of radiant heating system on indoor thermal comfort with/without external thermal disturbance," Energy, Elsevier, vol. 249(C).
    7. Karl-Villem Võsa & Andrea Ferrantelli & Jarek Kurnitski, 2022. "Cooling Thermal Comfort and Efficiency Parameters of Ceiling Panels, Underfloor Cooling, Fan-Assisted Radiators, and Fan Coil," Energies, MDPI, vol. 15(11), pages 1-19, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Romaní, Joaquim & Cabeza, Luisa F. & de Gracia, Alvaro, 2018. "Development and experimental validation of a transient 2D numeric model for radiant walls," Renewable Energy, Elsevier, vol. 115(C), pages 859-870.
    2. Antonopoulos, K.A. & Gioti, F. & Tzivanidis, C., 2010. "A transient model for the energy analysis of indoor spaces," Applied Energy, Elsevier, vol. 87(10), pages 3084-3091, October.
    3. Krzaczek, M. & Florczuk, J. & Tejchman, J., 2019. "Improved energy management technique in pipe-embedded wall heating/cooling system in residential buildings," Applied Energy, Elsevier, vol. 254(C).
    4. Tzivanidis, C. & Antonopoulos, K.A. & Gioti, F., 2011. "Numerical simulation of cooling energy consumption in connection with thermostat operation mode and comfort requirements for the Athens buildings," Applied Energy, Elsevier, vol. 88(8), pages 2871-2884, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:176:y:2019:i:c:p:23-33. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.