IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v145y2018icp567-581.html
   My bibliography  Save this article

Control of nitrogen oxide formation in power generation using modified reaction kinetics and mixing

Author

Listed:
  • Bashtani, Javad
  • Seddighi, Sadegh
  • Bahrabadi-Jovein, Iman

Abstract

This work presents a new method for reducing the formation of nitrogen oxide (NOx) emission in power generation by varying the dominating NOx formation reaction mechanism. A burner secondary oxidizer (BSO) injection is introduced in which a part of the required oxidizer for the reactions is distributed in a way to selectively increase the reactant radicals in an extended flame region. The modeling is validated using experimental results in a 300 kW furnace with a non-premixed natural gas burner. While the NOx emission level is the focus of this work, the effects of this new design on the flow streamlines and the fields of temperature and velocity are studied. The results show that the optimum case with minimum outgoing NOx is the case with 25% BSO ratio associated with burner primary oxidizer equivalence ratio of 1.22. This optimum condition leads to 66% reduction of NOx with only 8 ppm of outgoing NOx. The combustion in the furnace for the case with 25% BSO reduces the NOx formation mainly due to generating a larger fuel-rich area close to the burner compared to the typical burners leading to the change of the dominating NOx formation from Zeldovich mechanism to prompt NOx mechanism.

Suggested Citation

  • Bashtani, Javad & Seddighi, Sadegh & Bahrabadi-Jovein, Iman, 2018. "Control of nitrogen oxide formation in power generation using modified reaction kinetics and mixing," Energy, Elsevier, vol. 145(C), pages 567-581.
    • Handle: RePEc:eee:energy:v:145:y:2018:i:c:p:567-581
    DOI: 10.1016/j.energy.2017.12.143
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217321862
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.12.143?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Maiboom, Alain & Tauzia, Xavier & Hétet, Jean-François, 2008. "Experimental study of various effects of exhaust gas recirculation (EGR) on combustion and emissions of an automotive direct injection diesel engine," Energy, Elsevier, vol. 33(1), pages 22-34.
    2. Yang, Chuntao & Wei, Xiaolan & Wang, Weilong & Lin, Zihao & Ding, Jing & Wang, Yan & Peng, Qiang & Yang, Jianping, 2016. "NOx emissions and the component changes of ternary molten nitrate salts in thermal energy storage process," Applied Energy, Elsevier, vol. 184(C), pages 346-352.
    3. Seddighi, Sadegh, 2017. "Design of large scale oxy-fuel fluidized bed boilers: Constant thermal power and constant furnace size scenarios," Energy, Elsevier, vol. 118(C), pages 1286-1294.
    4. Li, Yu & Fan, Weidong, 2016. "Effect of char gasification on NOx formation process in the deep air-staged combustion in a 20kW down flame furnace," Applied Energy, Elsevier, vol. 164(C), pages 258-267.
    5. Ti, Shuguang & Chen, Zhichao & Li, Zhengqi & Xie, Yiquan & Shao, Yunlin & Zong, Qiudong & Zhang, Qinghua & Zhang, Hao & Zeng, Lingyan & Zhu, Qunyi, 2014. "Influence of different swirl vane angles of over fire air on flow and combustion characteristics and NOx emissions in a 600 MWe utility boiler," Energy, Elsevier, vol. 74(C), pages 775-787.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Luo, Jianghui & Zou, Chun & He, Yizhuo & Jing, Huixiang & Cheng, Sizhe, 2019. "The characteristics and mechanism of NO formation during pyridine oxidation in O2/N2 and O2/CO2 atmospheres," Energy, Elsevier, vol. 187(C).
    2. Abdolahi-Mansoorkhani, Hamed & Seddighi, Sadegh, 2019. "H2S and CO2 capture from gaseous fuels using nanoparticle membrane," Energy, Elsevier, vol. 168(C), pages 847-857.
    3. Simona Di Fraia & M. Rakib Uddin, 2022. "Energy Recovery from Waste Paper and Deinking Sludge to Support the Demand of the Paper Industry: A Numerical Analysis," Sustainability, MDPI, vol. 14(8), pages 1-18, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsuneyoshi, Koji & Yamamoto, Kazuhiro, 2013. "Experimental study of hexagonal and square diesel particulate filters under controlled and uncontrolled catalyzed regeneration," Energy, Elsevier, vol. 60(C), pages 325-332.
    2. Macián, V. & Serrano, J.R. & Piqueras, P. & Sanchis, E.J., 2019. "Internal pore diffusion and adsorption impact on the soot oxidation in wall-flow particulate filters," Energy, Elsevier, vol. 179(C), pages 407-421.
    3. Jia, Ming & Li, Yaopeng & Xie, Maozhao & Wang, Tianyou, 2013. "Numerical evaluation of the potential of late intake valve closing strategy for diesel PCCI (premixed charge compression ignition) engine in a wide speed and load range," Energy, Elsevier, vol. 51(C), pages 203-215.
    4. Qiu, Liang & Cheng, Xiaobei & Liu, Bei & Dong, Shijun & Bao, Zufeng, 2016. "Partially premixed combustion based on different injection strategies in a light-duty diesel engine," Energy, Elsevier, vol. 96(C), pages 155-165.
    5. Zhang, Ji & Jing, Wei & Roberts, William L. & Fang, Tiegang, 2013. "Effects of ambient oxygen concentration on biodiesel and diesel spray combustion under simulated engine conditions," Energy, Elsevier, vol. 57(C), pages 722-732.
    6. Jayabal, Ravikumar & Subramani, Sekar & Dillikannan, Damodharan & Devarajan, Yuvarajan & Thangavelu, Lakshmanan & Nedunchezhiyan, Mukilarasan & Kaliyaperumal, Gopal & De Poures, Melvin Victor, 2022. "Multi-objective optimization of performance and emission characteristics of a CRDI diesel engine fueled with sapota methyl ester/diesel blends," Energy, Elsevier, vol. 250(C).
    7. Hoseini, S.S. & Najafi, G. & Ghobadian, B. & Mamat, Rizalman & Sidik, Nor Azwadi Che & Azmi, W.H., 2017. "The effect of combustion management on diesel engine emissions fueled with biodiesel-diesel blends," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 307-331.
    8. Rajasekar, E. & Murugesan, A. & Subramanian, R. & Nedunchezhian, N., 2010. "Review of NOx reduction technologies in CI engines fuelled with oxygenated biomass fuels," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 2113-2121, September.
    9. Yiwei Wang & Yuan Wang & Sunhua Deng & Qiang Li & Jingjing Gu & Haoche Shui & Wei Guo, 2022. "Numerical Simulation Analysis of Heating Effect of Downhole Methane Catalytic Combustion Heater under High Pressure," Energies, MDPI, vol. 15(3), pages 1-23, February.
    10. Tauzia, Xavier & Maiboom, Alain & Shah, Samiur Rahman, 2010. "Experimental study of inlet manifold water injection on combustion and emissions of an automotive direct injection Diesel engine," Energy, Elsevier, vol. 35(9), pages 3628-3639.
    11. Li, Yaopeng & Jia, Ming & Chang, Yachao & Liu, Yaodong & Xie, Maozhao & Wang, Tianyou & Zhou, Lei, 2014. "Parametric study and optimization of a RCCI (reactivity controlled compression ignition) engine fueled with methanol and diesel," Energy, Elsevier, vol. 65(C), pages 319-332.
    12. Adamczyk, Wojciech P. & Myöhänen, Kari & Hartge, Ernst-Ulrich & Ritvanen, Jouni & Klimanek, Adam & Hyppänen, Timo & Białecki, Ryszard A., 2018. "Generation of data sets for semi-empirical models of circulated fluidized bed boilers using hybrid Euler-Lagrange technique," Energy, Elsevier, vol. 143(C), pages 219-240.
    13. Serrano, J. & Jiménez-Espadafor, F.J. & Lora, A. & Modesto-López, L. & Gañán-Calvo, A. & López-Serrano, J., 2019. "Experimental analysis of NOx reduction through water addition and comparison with exhaust gas recycling," Energy, Elsevier, vol. 168(C), pages 737-752.
    14. Zhang, Chen & Sun, Zongxuan, 2016. "Using variable piston trajectory to reduce engine-out emissions," Applied Energy, Elsevier, vol. 170(C), pages 403-414.
    15. Desantes, J.M. & Torregrosa, A.J. & Broatch, A. & Olmeda, P., 2011. "Experiments on the influence of intake conditions on local instantaneous heat flux in reciprocating internal combustion engines," Energy, Elsevier, vol. 36(1), pages 60-69.
    16. Fernández, Angel G. & Muñoz-Sánchez, Belen & Nieto-Maestre, Javier & García-Romero, Ana, 2019. "High temperature corrosion behavior on molten nitrate salt-based nanofluids for CSP plants," Renewable Energy, Elsevier, vol. 130(C), pages 902-909.
    17. Wei, Xiaolan & Qin, Bo & Yang, Chuntao & Wang, Weilong & Ding, Jing & Wang, Yan & Peng, Qiang, 2019. "Nox emission of ternary nitrate molten salts in high-temperature heat storage and transfer process," Applied Energy, Elsevier, vol. 236(C), pages 147-154.
    18. Ganesh, D. & Nagarajan, G., 2010. "Homogeneous charge compression ignition (HCCI) combustion of diesel fuel with external mixture formation," Energy, Elsevier, vol. 35(1), pages 148-157.
    19. Zhong, Yu-Xiu & Wang, Xin & Xu, Gang & Ning, Xinyu & Zhou, Lin & Tang, Wen & Wang, Ming-Hao & Wang, Tong & Xu, Jun & Jiang, Long & Wang, Yi & Su, Sheng & Hu, Song & Xiang, Jun, 2023. "Investigation on slagging and high-temperature corrosion prevention and control of a 1000 MW ultra supercritical double tangentially fired boiler," Energy, Elsevier, vol. 275(C).
    20. Liu, Bolan & Zhang, Fujun & Zhao, Changlu & An, Xiaohui & Pei, Haijun, 2016. "A novel lambda-based EGR (exhaust gas recirculation) modulation method for a turbocharged diesel engine under transient operation," Energy, Elsevier, vol. 96(C), pages 521-530.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:145:y:2018:i:c:p:567-581. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.