IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v102y2016icp31-43.html
   My bibliography  Save this article

Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach

Author

Listed:
  • Creyx, M.
  • Delacourt, E.
  • Morin, C.
  • Desmet, B.

Abstract

A dynamic model using the bond graph formalism of the expansion cylinder of an open Joule cycle Ericsson engine intended for a biomass-fuelled micro-CHP system is presented. Dynamic phenomena, such as the thermodynamic evolution of air, the instantaneous air mass flow rates linked to pressure drops crossing the valves, the heat transferred through the expansion cylinder wall and the mechanical friction losses, are included in the model. The influence on the Ericsson engine performances of the main operating conditions (intake air pressure and temperature, timing of intake and exhaust valve closing, rotational speed, mechanical friction losses and heat transfer at expansion cylinder wall) is studied. The operating conditions maximizing the performances of the Ericsson engine used in the a biomass-fuelled micro-CHP unit are an intake air pressure between 6 and 8 bar, a maximized intake air temperature, an adjustment of the intake and exhaust valve closing corresponding to an expansion cycle close to the theoretical Joule cycle, a rotational speed close to 800 rpm. The heat transfer at the expansion cylinder wall reduces the engine performances.

Suggested Citation

  • Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B., 2016. "Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach," Energy, Elsevier, vol. 102(C), pages 31-43.
    • Handle: RePEc:eee:energy:v:102:y:2016:i:c:p:31-43
    DOI: 10.1016/j.energy.2016.01.106
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216300676
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2016.01.106?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wojewoda, Jerzy & Kazimierski, Zbyszko, 2010. "Numerical model and investigations of the externally heated valve Joule engine," Energy, Elsevier, vol. 35(5), pages 2099-2108.
    2. Touré, Abdou & Stouffs, Pascal, 2014. "Modeling of the Ericsson engine," Energy, Elsevier, vol. 76(C), pages 445-452.
    3. Moss, R. W. & Roskilly, A. P. & Nanda, S. K., 2005. "Reciprocating Joule-cycle engine for domestic CHP systems," Applied Energy, Elsevier, vol. 80(2), pages 169-185, February.
    4. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B. & Peultier, P., 2013. "Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle," Energy, Elsevier, vol. 49(C), pages 229-239.
    5. Lontsi, Frederic & Hamandjoda, Oumarou & Fozao, Kennedy & Stouffs, Pascal & Nganhou, Jean, 2013. "Dynamic simulation of a small modified Joule cycle reciprocating Ericsson engine for micro-cogeneration systems," Energy, Elsevier, vol. 63(C), pages 309-316.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Huang, Lin & Cheng, Gang & Zhu, Guoqing & Li, Dongliang, 2018. "Development of a bond graph based model library for turbocharged diesel engines," Energy, Elsevier, vol. 148(C), pages 728-743.
    2. Rui F. Costa & Brendan D. MacDonald, 2018. "Comparison of the Net Work Output between Stirling and Ericsson Cycles," Energies, MDPI, vol. 11(3), pages 1-16, March.
    3. Ngwaka, Ugochukwu & Wu, Dawei & Happian-Smith, Julian & Jia, Boru & Smallbone, Andrew & Diyoke, Chidiebere & Roskilly, Anthony Paul, 2021. "Parametric analysis of a semi-closed-loop linear joule engine generator using argon and oxy-hydrogen combustion," Energy, Elsevier, vol. 217(C).
    4. Ngangué, Max Ndamé & Stouffs, Pascal, 2020. "Dynamic simulation of an original Joule cycle liquid pistons hot air Ericsson engine," Energy, Elsevier, vol. 190(C).
    5. Komninos, N.P. & Rogdakis, E.D., 2018. "Numerical investigation into the effect of compressor and expander valve timings on the performance of an Ericsson engine equipped with a gas-to-gas heat exchanger," Energy, Elsevier, vol. 163(C), pages 1077-1092.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ngwaka, Ugochukwu & Wu, Dawei & Happian-Smith, Julian & Jia, Boru & Smallbone, Andrew & Diyoke, Chidiebere & Roskilly, Anthony Paul, 2021. "Parametric analysis of a semi-closed-loop linear joule engine generator using argon and oxy-hydrogen combustion," Energy, Elsevier, vol. 217(C).
    2. Touré, Abdou & Stouffs, Pascal, 2014. "Modeling of the Ericsson engine," Energy, Elsevier, vol. 76(C), pages 445-452.
    3. Ngangué, Max Ndamé & Stouffs, Pascal, 2020. "Dynamic simulation of an original Joule cycle liquid pistons hot air Ericsson engine," Energy, Elsevier, vol. 190(C).
    4. Komninos, N.P. & Rogdakis, E.D., 2018. "Numerical investigation into the effect of compressor and expander valve timings on the performance of an Ericsson engine equipped with a gas-to-gas heat exchanger," Energy, Elsevier, vol. 163(C), pages 1077-1092.
    5. Ngwaka, Ugochukwu & Jia, Boru & Lawrence, Christopher & Wu, Dawei & Smallbone, Andrew & Roskilly, Anthony Paul, 2019. "The characteristics of a Linear Joule Engine Generator operating on a dry friction principle," Applied Energy, Elsevier, vol. 237(C), pages 49-59.
    6. Rui F. Costa & Brendan D. MacDonald, 2018. "Comparison of the Net Work Output between Stirling and Ericsson Cycles," Energies, MDPI, vol. 11(3), pages 1-16, March.
    7. Lontsi, Frederic & Hamandjoda, Oumarou & Fozao, Kennedy & Stouffs, Pascal & Nganhou, Jean, 2013. "Dynamic simulation of a small modified Joule cycle reciprocating Ericsson engine for micro-cogeneration systems," Energy, Elsevier, vol. 63(C), pages 309-316.
    8. Chouder, Ryma & Benabdesselam, Azzedine & Stouffs, Pascal, 2023. "Modeling results of a new high performance free liquid piston engine," Energy, Elsevier, vol. 263(PD).
    9. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B. & Peultier, P., 2013. "Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle," Energy, Elsevier, vol. 49(C), pages 229-239.
    10. Kazimierski, Zbyszko & Wojewoda, Jerzy, 2014. "Heat exchanger operation in the externally heated air valve engine with separated settling chambers," Energy, Elsevier, vol. 74(C), pages 675-681.
    11. Ameen, Muhammad Tahir & Ma, Zhiwei & Smallbone, Andrew & Norman, Rose & Roskilly, Anthony Paul, 2023. "Demonstration system of pumped heat energy storage (PHES) and its round-trip efficiency," Applied Energy, Elsevier, vol. 333(C).
    12. Maghanki, Maryam Mohammadi & Ghobadian, Barat & Najafi, Gholamhassan & Galogah, Reza Janzadeh, 2013. "Micro combined heat and power (MCHP) technologies and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 510-524.
    13. Ian W. Eames & Kieran Evans & Stephen Pickering, 2016. "A Comparative Study of Open and Closed Heat-Engines for Small-Scale CHP Applications," Energies, MDPI, vol. 9(3), pages 1-12, February.
    14. White, A.J., 2009. "Thermodynamic analysis of the reverse Joule-Brayton cycle heat pump for domestic heating," Applied Energy, Elsevier, vol. 86(11), pages 2443-2450, November.
    15. Chatzopoulou, Maria Anna & Lecompte, Steven & Paepe, Michel De & Markides, Christos N., 2019. "Off-design optimisation of organic Rankine cycle (ORC) engines with different heat exchangers and volumetric expanders in waste heat recovery applications," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    16. Isa, Normazlina Mat & Tan, Chee Wei & Yatim, A.H.M., 2018. "A comprehensive review of cogeneration system in a microgrid: A perspective from architecture and operating system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 2236-2263.
    17. Qian, Jin-yuan & Wei, Lin & Zhang, Ming & Chen, Fu-qiang & Chen, Li-long & Jiang, Wei-kang & Jin, Zhi-jiang, 2017. "Flow rate analysis of compressible superheated steam through pressure reducing valves," Energy, Elsevier, vol. 135(C), pages 650-658.
    18. Chatzopoulou, Maria Anna & Simpson, Michael & Sapin, Paul & Markides, Christos N., 2019. "Off-design optimisation of organic Rankine cycle (ORC) engines with piston expanders for medium-scale combined heat and power applications," Applied Energy, Elsevier, vol. 238(C), pages 1211-1236.
    19. Chandramouli, R. & Srinivasa Rao, M.S.S. & Ramji, K., 2015. "Parametric and optimization studies of reheat and regenerative Braysson cycle," Energy, Elsevier, vol. 93(P2), pages 2146-2156.
    20. Barbieri, Enrico Saverio & Spina, Pier Ruggero & Venturini, Mauro, 2012. "Analysis of innovative micro-CHP systems to meet household energy demands," Applied Energy, Elsevier, vol. 97(C), pages 723-733.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:102:y:2016:i:c:p:31-43. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.