IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v90y2012i1p137-141.html
   My bibliography  Save this article

Operational performance of the development of a 15kW parabolic trough mid-temperature solar receiver/reactor for hydrogen production

Author

Listed:
  • Hong, Hui
  • Liu, Qibin
  • Jin, Hongguang

Abstract

In this paper, we report the operational performance and energy conversion efficiency of a developed 15kW solar chemical receiver/reactor for hydrogen production. A concentrated solar heat of around 200–300°C was utilized to provide process heat to drive methanol steam reforming. A modified 15kW direct-irradiation solar reactor coupled with a linear receiver positioned along the focal line of a one-axis parabolic trough concentrator was used. The experiments were conducted from 200 to 300°C under a mean solar flux of 300–800W/m2 and a reactant feeding rate of 6kg/h. Reactants were continuously fed, and the attained conversion rate of methanol was more than 70% at 700W/m2. The typical solar thermochemical efficiency of solar thermal energy converted into chemical energy was in the 20–28% range. The overall energy efficiency of input solar power conversion into chemical energy reached up to 17% and may be further increased by improving solar field efficiency. Hydrogen production exceeding 80% was achieved. In addition, preliminary economic evaluation was performed, and methods for further improvement were proposed. This paper proves that solar hydrogen production is feasible by combining solar thermal energy with alternative fuel at around 200–300°C, which is much lower than the temperature of other solar thermochemical processes. This may offer an economic approach to solar fuel production and extend the application of mid-temperature solar thermal energy.

Suggested Citation

  • Hong, Hui & Liu, Qibin & Jin, Hongguang, 2012. "Operational performance of the development of a 15kW parabolic trough mid-temperature solar receiver/reactor for hydrogen production," Applied Energy, Elsevier, vol. 90(1), pages 137-141.
  • Handle: RePEc:eee:appene:v:90:y:2012:i:1:p:137-141
    DOI: 10.1016/j.apenergy.2011.04.050
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261911002856
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2011.04.050?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Prater, Daniel N. & Rusek, John J., 2003. "Energy density of a methanol/hydrogen-peroxide fuel cell," Applied Energy, Elsevier, vol. 74(1-2), pages 135-140, January.
    2. Galanti, Leandro & Franzoni, Alessandro & Traverso, Alberto & Massardo, Aristide F., 2011. "Existing large steam power plant upgraded for hydrogen production," Applied Energy, Elsevier, vol. 88(5), pages 1510-1518, May.
    3. Hoffman, Peter, 1994. "Hydrogen--the optimum chemical fuel," Applied Energy, Elsevier, vol. 47(2-3), pages 183-199.
    4. Liu, Qibin & Hong, Hui & Yuan, Jianli & Jin, Hongguang & Cai, Ruixian, 2009. "Experimental investigation of hydrogen production integrated methanol steam reforming with middle-temperature solar thermal energy," Applied Energy, Elsevier, vol. 86(2), pages 155-162, February.
    5. Carina Dennis, 2006. "Radiation nation," Nature, Nature, vol. 443(7107), pages 23-24, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mercati, Stefano & Milani, Massimo & Montorsi, Luca & Paltrinieri, Fabrizio, 2012. "Design of the steam generator in an energy conversion system based on the aluminum combustion with water," Applied Energy, Elsevier, vol. 97(C), pages 686-694.
    2. Wijaya, Willy Yanto & Kawasaki, Shunsuke & Watanabe, Hirotatsu & Okazaki, Ken, 2012. "Damköhler number as a descriptive parameter in methanol steam reforming and its integration with absorption heat pump system," Applied Energy, Elsevier, vol. 94(C), pages 141-147.
    3. Paul Pinchao & Alejandra Torres & Marco Yánez & Salvatore Reina & Edgar Cando, 2024. "Analysis for the Implementation of Surplus Hydropower for Green Hydrogen Production in Ecuador," Energies, MDPI, vol. 17(23), pages 1-15, December.
    4. Jiang, Dongyue & Yang, Wenming & Tang, Aikun, 2016. "A refractory selective solar absorber for high performance thermochemical steam reforming," Applied Energy, Elsevier, vol. 170(C), pages 286-292.
    5. Li, Sheng & Sui, Jun & Jin, Hongguang & Zheng, Jianjiao, 2013. "Full chain energy performance for a combined cooling, heating and power system running with methanol and solar energy," Applied Energy, Elsevier, vol. 112(C), pages 673-681.
    6. Aasadnia, Majid & Mehrpooya, Mehdi, 2018. "Large-scale liquid hydrogen production methods and approaches: A review," Applied Energy, Elsevier, vol. 212(C), pages 57-83.
    7. Zhang, Peiye & Liu, Ming & Mu, Ruiqi & Yan, Junjie, 2024. "Exergy-based control strategy design and dynamic performance enhancement for parabolic trough solar receiver-reactor of methanol decomposition reaction," Renewable Energy, Elsevier, vol. 224(C).
    8. Li, Chunlin & Xu, Hengyong & Hou, Shoufu & Sun, Jian & Meng, Fanqiong & Ma, Junguo & Tsubaki, Noritatsu, 2013. "SiC foam monolith catalyst for pressurized adiabatic methane reforming," Applied Energy, Elsevier, vol. 107(C), pages 297-303.
    9. Rahimpour, M.R. & Mazinani, S. & Vaferi, B. & Baktash, M.S., 2011. "Comparison of two different flow types on CO removal along a two-stage hydrogen permselective membrane reactor for methanol synthesis," Applied Energy, Elsevier, vol. 88(1), pages 41-51, January.
    10. Shi, Yaolu & Sun, Jie & Wei, Jinjia, 2024. "Proposal of a parabolic-trough-oriented photo-thermo-reactor with coaxial baffles and dual-bed for high-efficient solar-driven hydrogen production from methanol steam reforming," Renewable Energy, Elsevier, vol. 228(C).
    11. Mehmood, Asad & Ha, Heung Yong, 2014. "Performance restoration of direct methanol fuel cells in long-term operation using a hydrogen evolution method," Applied Energy, Elsevier, vol. 114(C), pages 164-171.
    12. Ismail, A. & Kamarudin, S.K. & Daud, W.R.W. & Masdar, S. & Hasran, U.A., 2018. "Development of 2D multiphase non-isothermal mass transfer model for DMFC system," Energy, Elsevier, vol. 152(C), pages 263-276.
    13. Wang, Yangjie & Li, Qiang & Li, Dianhong & Hong, Hui, 2018. "Thermodynamic analysis for a concentrating photovoltaic-photothermochemical hybrid system," Energy, Elsevier, vol. 148(C), pages 528-536.
    14. Rivarolo, M. & Magistri, L. & Massardo, A.F., 2014. "Hydrogen and methane generation from large hydraulic plant: Thermo-economic multi-level time-dependent optimization," Applied Energy, Elsevier, vol. 113(C), pages 1737-1745.
    15. Gao, Xian-Zhong & Hou, Zhong-Xi & Guo, Zheng & Chen, Xiao-Qian, 2015. "Reviews of methods to extract and store energy for solar-powered aircraft," Renewable and Sustainable Energy Reviews, Elsevier, vol. 44(C), pages 96-108.
    16. Bai, Zhang & Liu, Qibin & Gong, Liang & Lei, Jing, 2019. "Application of a mid-/low-temperature solar thermochemical technology in the distributed energy system with cooling, heating and power production," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    17. Roca, Lidia & de la Calle, Alberto & Yebra, Luis J., 2013. "Heliostat-field gain-scheduling control applied to a two-step solar hydrogen production plant," Applied Energy, Elsevier, vol. 103(C), pages 298-305.
    18. Cheng, Ze-Dong & Men, Jing-Jing & Liu, Shi-Cheng & He, Ya-Ling, 2019. "Three-dimensional numerical study on a novel parabolic trough solar receiver-reactor of a locally-installed Kenics static mixer for efficient hydrogen production," Applied Energy, Elsevier, vol. 250(C), pages 131-146.
    19. Seo, Sang Hern & Lee, Chang Sik, 2010. "A study on the overall efficiency of direct methanol fuel cell by methanol crossover current," Applied Energy, Elsevier, vol. 87(8), pages 2597-2604, August.
    20. Wang, Yangjie & Li, Qiang & Xuan, Yimin, 2019. "Thermal and chemical reaction performance analyses of solar thermochemical volumetric receiver/reactor with nanofluid," Energy, Elsevier, vol. 189(C).

    More about this item

    Keywords

    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:90:y:2012:i:1:p:137-141. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.