IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v377y2025ipas030626192401821x.html
   My bibliography  Save this article

Revealing effects of pouch Li-ion battery structure on fast charging ability through numerical simulation

Author

Listed:
  • Cai, Jixiang
  • Wei, Xuezhe
  • Wang, Xueyuan
  • Zhu, Jiangong
  • Jiang, Bo
  • Tao, Zhe
  • Tian, Mengshu
  • Dai, Haifeng

Abstract

Lithium plating may occur in lithium-ion batteries (LIBs) under extreme charging conditions, such as high C-rates and low temperatures, which compromises both the lifespan and safety of the batteries. Avoiding lithium plating is a critical topic in the design and management of LIBs. In the present work, a three-dimensional electrochemical model is established and validated to optimize the battery structure. Using the onset time of lithium plating as a quantitative index, the particle swarm optimization (PSO) algorithm is employed to identify the best and worst combinations of battery structures, including tab type, cell aspect ratio, and tab attachment positions. The results demonstrate that the onset time of lithium plating for the best structures in the three tab types is significantly delayed compared to the worst structures. Taking 2C charging as an example, there is an improvement of 28.57 %, 30.88 %, and 42.19 % for the normal type (NT), counter type (CT), and L-shaped type (LT), respectively. The differences in the degree of optimization among the three tab types are primarily observed in the worst structures, particularly in the worst structure of the LT type. Furthermore, the distributions of lithium plating overpotential and standard deviations are presented, indicating that optimizing battery structures can also significantly enhance the uniformity of lithium plating within the anode. Finally, the sensitivity analysis is conducted and the tab attachment positions are proved to be the most important factor among these variables. This work provides valuable insights into battery design and manufacturing with a focus on improving fast charging ability.

Suggested Citation

  • Cai, Jixiang & Wei, Xuezhe & Wang, Xueyuan & Zhu, Jiangong & Jiang, Bo & Tao, Zhe & Tian, Mengshu & Dai, Haifeng, 2025. "Revealing effects of pouch Li-ion battery structure on fast charging ability through numerical simulation," Applied Energy, Elsevier, vol. 377(PA).
    • Handle: RePEc:eee:appene:v:377:y:2025:i:pa:s030626192401821x
    DOI: 10.1016/j.apenergy.2024.124438
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626192401821X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2024.124438?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. He, Tengfei & Zhang, Teng & Wang, Zhirong & Cai, Qiong, 2022. "A comprehensive numerical study on electrochemical-thermal models of a cylindrical lithium-ion battery during discharge process," Applied Energy, Elsevier, vol. 313(C).
    2. Zhu, Yuli & Jiang, Bo & Zhu, Jiangong & Wang, Xueyuan & Wang, Rong & Wei, Xuezhe & Dai, Haifeng, 2023. "Adaptive state of health estimation for lithium-ion batteries using impedance-based timescale information and ensemble learning," Energy, Elsevier, vol. 284(C).
    3. Xu, Meng & Reichman, Benjamin & Wang, Xia, 2019. "Modeling the effect of electrode thickness on the performance of lithium-ion batteries with experimental validation," Energy, Elsevier, vol. 186(C).
    4. Elham Hosseinzadeh & James Marco & Paul Jennings, 2017. "Electrochemical-Thermal Modelling and Optimisation of Lithium-Ion Battery Design Parameters Using Analysis of Variance," Energies, MDPI, vol. 10(9), pages 1-22, August.
    5. Couto, Luis. D. & Charkhgard, Mohammad & Karaman, Berke & Job, Nathalie & Kinnaert, Michel, 2023. "Lithium-ion battery design optimization based on a dimensionless reduced-order electrochemical model," Energy, Elsevier, vol. 263(PE).
    6. Wei, Gang & Huang, Ranjun & Zhang, Guangxu & Jiang, Bo & Zhu, Jiangong & Guo, Yangyang & Han, Guangshuai & Wei, Xuezhe & Dai, Haifeng, 2023. "A comprehensive insight into the thermal runaway issues in the view of lithium-ion battery intrinsic safety performance and venting gas explosion hazards," Applied Energy, Elsevier, vol. 349(C).
    7. Wenxiao Huang & Yusheng Ye & Hao Chen & Rafael A. Vilá & Andrew Xiang & Hongxia Wang & Fang Liu & Zhiao Yu & Jinwei Xu & Zewen Zhang & Rong Xu & Yecun Wu & Lien-Yang Chou & Hansen Wang & Junwei Xu & D, 2022. "Onboard early detection and mitigation of lithium plating in fast-charging batteries," Nature Communications, Nature, vol. 13(1), pages 1-9, December.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Xu, Wentao & Zhu, Jiangong & Zhang, Jie & Tian, Mengshu & Cai, Jixiang & Wu, Hang & Wei, Gang & Chen, Tingfeng & Wei, Xuezhe & Dai, Haifeng, 2025. "Investigation of lithium-ion battery degradation by corrected differential voltage analysis based on reference electrode," Applied Energy, Elsevier, vol. 389(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Xie, Yanmin & Xu, Jun & Jin, Chengwei & Jia, Zhenyu & Mei, Xuesong, 2024. "A novel reduced-order electrochemical model of lithium-ion batteries with both high fidelity and real-time applicability," Energy, Elsevier, vol. 306(C).
    2. Liu, Fen & Yang, Na & Li, Weihua & Wang, Fuqiang & Yang, Lizhong & Liu, Hui & Du, Qian & Romagnoli, Alessandro & Wang, Jianfeng, 2025. "Efficient and lightweight battery protection film with a bionic polar bear structure in extreme environments," Applied Energy, Elsevier, vol. 380(C).
    3. Astaneh, Majid & Andric, Jelena & Löfdahl, Lennart & Stopp, Peter, 2022. "Multiphysics simulation optimization framework for lithium-ion battery pack design for electric vehicle applications," Energy, Elsevier, vol. 239(PB).
    4. Shen, Yudong & Wang, Xueyuan & Jiang, Zhao & Luo, Bingyin & Chen, Daidai & Wei, Xuezhe & Dai, Haifeng, 2024. "Online detection of lithium plating onset during constant and multistage constant current fast charging for lithium-ion batteries," Applied Energy, Elsevier, vol. 370(C).
    5. Meilin Gong & Jiatao Chen & Jianming Chen & Xiaohuan Zhao, 2024. "Study on Discharge Characteristic Performance of New Energy Electric Vehicle Batteries in Teaching Experiments of Safety Simulation under Different Operating Conditions," Energies, MDPI, vol. 17(12), pages 1-14, June.
    6. Ningning Lian & Wentao Ji & Jie Chen, 2025. "Research on the Safety Risk Analysis Framework and Control System for Multi-Type New Energy Storage Technologies," Energies, MDPI, vol. 18(4), pages 1-15, February.
    7. Zhang, Yue & Song, Laifeng & Tian, Jiamin & Mei, Wenxin & Jiang, Lihua & Sun, Jinhua & Wang, Qingsong, 2024. "Modeling the propagation of internal thermal runaway in lithium-ion battery," Applied Energy, Elsevier, vol. 362(C).
    8. Li, Yong & Wang, Liye & Feng, Yanbiao & Liao, Chenglin & Yang, Jue, 2024. "An online state-of-health estimation method for lithium-ion battery based on linear parameter-varying modeling framework," Energy, Elsevier, vol. 298(C).
    9. Chang, Chun & Li, Xinqi & Sun, Yuhui & Jiang, Jiuchun & Tian, Aina & Lv, Lu & Gao, Yang, 2025. "Force-signal driven real-time lithium plating detection in mechanically constrained LiFePO4 pouch cells," Energy, Elsevier, vol. 323(C).
    10. Peng, Simin & Wang, Yujian & Tang, Aihua & Jiang, Yuxia & Kan, Jiarong & Pecht, Michael, 2025. "State of health estimation joint improved grey wolf optimization algorithm and LSTM using partial discharging health features for lithium-ion batteries," Energy, Elsevier, vol. 315(C).
    11. Li, Li & Ling, Lei & Xie, Yajun & Zhou, Wencai & Wang, Tianbo & Zhang, Lanchun & Bei, Shaoyi & Zheng, Keqing & Xu, Qiang, 2023. "Comparative study of thermal management systems with different cooling structures for cylindrical battery modules: Side-cooling vs. terminal-cooling," Energy, Elsevier, vol. 274(C).
    12. Li, Yifan & Jiang, Chen & Zhao, Chenggong & Zhu, Dahai & Wang, Lingling & Xie, Huaqing & Yu, Wei, 2025. "A comprehensive review for the heat traceability in lithium-ion batteries: From generation and transfer to thermal management," Renewable and Sustainable Energy Reviews, Elsevier, vol. 216(C).
    13. Liu, Wenxue & Hu, Xiaosong & Zhang, Kai & Xie, Yi & He, Jinsong & Song, Ziyou, 2025. "Enabling high-fidelity electrothermal modeling of electric flying car batteries: A physics-data hybrid approach," Applied Energy, Elsevier, vol. 388(C).
    14. Tian, Jiaqiang & Fan, Yuan & Pan, Tianhong & Zhang, Xu & Yin, Jianning & Zhang, Qingping, 2024. "A critical review on inconsistency mechanism, evaluation methods and improvement measures for lithium-ion battery energy storage systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PB).
    15. Chen, Siqi & Wei, Xuezhe & Zhu, Zhehui & Wu, Hang & Ou, Yuxin & Zhang, Guangxu & Wang, Xueyuan & Zhu, Jiangong & Feng, Xuning & Dai, Haifeng & Ouyang, Minggao, 2024. "Thermal runaway front propagation characteristics, modeling and judging criteria for multi-jelly roll prismatic lithium-ion battery applications," Renewable Energy, Elsevier, vol. 231(C).
    16. Li, Changlong & Cui, Naxin & Wang, Chunyu & Zhang, Chenghui, 2021. "Reduced-order electrochemical model for lithium-ion battery with domain decomposition and polynomial approximation methods," Energy, Elsevier, vol. 221(C).
    17. Yi, Yahui & Xia, Chengyu & Shi, Lei & Meng, Leifeng & Chi, Qifu & Qian, Liqin & Ma, Tiancai & Chen, Siqi, 2024. "Lithium-ion battery expansion mechanism and Gaussian process regression based state of charge estimation with expansion characteristics," Energy, Elsevier, vol. 292(C).
    18. Yoon Koo Lee, 2019. "The Effect of Active Material, Conductive Additives, and Binder in a Cathode Composite Electrode on Battery Performance," Energies, MDPI, vol. 12(4), pages 1-19, February.
    19. Cai, Hongchang & Tang, Xiaopeng & Lai, Xin & Wang, Yanan & Han, Xuebing & Ouyang, Minggao & Zheng, Yuejiu, 2024. "How battery capacities are correctly estimated considering latent short-circuit faults," Applied Energy, Elsevier, vol. 375(C).
    20. Yong Li & Jue Yang & Wei Long Liu & Cheng Lin Liao, 2020. "Multi-Level Model Reduction and Data-Driven Identification of the Lithium-Ion Battery," Energies, MDPI, vol. 13(15), pages 1-23, July.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:377:y:2025:i:pa:s030626192401821x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.