IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v364y2024ics0306261924005877.html

Some searches may not work properly. We apologize for the inconvenience.

   My bibliography  Save this article

Water management and mass transport of a fractal metal foam flow-field based polymer electrolyte fuel cell using operando neutron imaging

Author

Listed:
  • Wu, Y.
  • Xu, L.
  • Zhou, S.
  • Yang, J.
  • Kockelmann, W.
  • Han, Y.
  • Li, Q.
  • Chen, W.
  • Coppens, M.-O.
  • Shearing, P.R.
  • Brett, D.J.L.
  • Jervis, R.

Abstract

Metal foam flow-fields (MFFs) exhibit immense potential for enhancing the performance of polymer electrolyte fuel cells (PEFCs) owing to their advantageous pore connectivity and abundant gas pathways. Nevertheless, challenges remain with the conventional MFF concerning reactant homogeneity and water management. To address these concerns, this study incorporates a fractal manifold into the MFF design. By employing operando neutron imaging, device-level testing, and electrochemical impedance spectroscopy (EIS), a comprehensive understanding of mass transfer and water management characteristics across the fractal manifold MFF is obtained. This novel design delivers better cell performance and lower mass transport resistance compared to the conventional MFF under all experimental conditions investigated. Notably, neutron imaging reveals that the fractal manifold MFF consistently exhibits a reduced liquid water content and more uniformly distributed liquid water compared to the conventional MFF. These superior characteristics of the design contribute to a substantial ∼15% increase in maximum power density compared to the conventional MFF-based PEFC. The results indicate the potential for further performance improvement by optimizing manifold parameters.

Suggested Citation

  • Wu, Y. & Xu, L. & Zhou, S. & Yang, J. & Kockelmann, W. & Han, Y. & Li, Q. & Chen, W. & Coppens, M.-O. & Shearing, P.R. & Brett, D.J.L. & Jervis, R., 2024. "Water management and mass transport of a fractal metal foam flow-field based polymer electrolyte fuel cell using operando neutron imaging," Applied Energy, Elsevier, vol. 364(C).
    • Handle: RePEc:eee:appene:v:364:y:2024:i:c:s0306261924005877
    DOI: 10.1016/j.apenergy.2024.123204
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261924005877
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2024.123204?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ralf F. Ziesche & Jennifer Hack & Lara Rasha & Maximilian Maier & Chun Tan & Thomas M. M. Heenan & Henning Markötter & Nikolay Kardjilov & Ingo Manke & Winfried Kockelmann & Dan J. L. Brett & Paul R. , 2022. "High-speed 4D neutron computed tomography for quantifying water dynamics in polymer electrolyte fuel cells," Nature Communications, Nature, vol. 13(1), pages 1-11, December.
    2. Zhao, Chen & Wang, Fei, 2023. "Optimal performance and modeling study of air-cooled proton exchange membrane fuel cell with various bipolar plate structure," Applied Energy, Elsevier, vol. 345(C).
    3. Lopes, Thiago & Beruski, Otavio & Manthanwar, Amit M. & Korkischko, Ivan & Pugliesi, Reynaldo & Stanojev, Marco Antonio & Andrade, Marcos Leandro Garcia & Pistikopoulos, Efstratios N. & Perez, Joelma , 2019. "Spatially resolved oxygen reaction, water, and temperature distribution: Experimental results as a function of flow field and implications for polymer electrolyte fuel cell operation," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    4. Gong, Fan & Yang, Xiaolong & Zhang, Xun & Mao, Zongqiang & Gao, Weitao & Wang, Cheng, 2023. "The study of Tesla valve flow field on the net power of proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 329(C).
    5. Shin, Dong Kyu & Yoo, Jin Hyuk & Kang, Dong Gyun & Kim, Min Soo, 2018. "Effect of cell size in metal foam inserted to the air channel of polymer electrolyte membrane fuel cell for high performance," Renewable Energy, Elsevier, vol. 115(C), pages 663-675.
    6. Kui Jiao & Jin Xuan & Qing Du & Zhiming Bao & Biao Xie & Bowen Wang & Yan Zhao & Linhao Fan & Huizhi Wang & Zhongjun Hou & Sen Huo & Nigel P. Brandon & Yan Yin & Michael D. Guiver, 2021. "Designing the next generation of proton-exchange membrane fuel cells," Nature, Nature, vol. 595(7867), pages 361-369, July.
    7. Wan, Zhongmin & Yan, Hanzhang & Sun, Yun & Yang, Chen & Chen, Xi & Kong, Xiangzhong & Chen, Yiyu & Tu, Zhengkai & Wang, Xiaodong, 2023. "Thermal management improvement of air-cooled proton exchange membrane fuel cell by using metal foam flow field," Applied Energy, Elsevier, vol. 333(C).
    8. Wang, Yulin & Wang, Xiaoai & Fan, Yuanzhi & He, Wei & Guan, Jinglei & Wang, Xiaodong, 2022. "Numerical Investigation of Tapered Flow Field Configurations for Enhanced Polymer Electrolyte Membrane Fuel Cell Performance," Applied Energy, Elsevier, vol. 306(PA).
    9. Chen, Xi & Yang, Chen & Sun, Yun & Liu, Qinxiao & Wan, Zhongmin & Kong, Xiangzhong & Tu, Zhengkai & Wang, Xiaodong, 2022. "Water management and structure optimization study of nickel metal foam as flow distributors in proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 309(C).
    10. Chen, Huicui & Zhang, Ruirui & Xia, Zhifeng & Weng, Qianyao & Zhang, Tong & Pei, Pucheng, 2023. "Experimental investigation on PEM fuel cell flooding mitigation under heavy loading condition," Applied Energy, Elsevier, vol. 349(C).
    11. Son, Jonghyun & Um, Sukkee & Kim, Young-Beom, 2022. "Relationship between number of turns of serpentine structure with metal foam flow field and polymer electrolyte membrane fuel cell performance," Renewable Energy, Elsevier, vol. 188(C), pages 372-383.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Qiao, Jia Nan & Guo, Hang & Ye, Fang & Chen, Hao, 2024. "A nonlinear contraction channel design inspired by typical mathematical curves: Boosting net power and water discharge of PEM fuel cells," Applied Energy, Elsevier, vol. 357(C).
    2. Sun, Feng & Su, Dandan & Li, Ping & Lin, Fanxin & Miu, Guodong & Wan, Qi & Yin, Yujie, 2024. "Effects of three-dimensional type flow fields on mass transfer and performance of proton exchange membrane fuel cell," Energy, Elsevier, vol. 295(C).
    3. Lian, Yunsong & Zhu, Zhengchao & You, Changtang & Lin, Liangliang & Lin, Fengtian & Lin, Le & Huang, Yating & Zhou, Wei, 2023. "Structural optimization of fiber porous self-humidifying flow field plates applied to proton exchange membrane fuel cells," Energy, Elsevier, vol. 271(C).
    4. Yao, Jing & Wu, Zhen & Wang, Huan & Yang, Fusheng & Xuan, Jin & Xing, Lei & Ren, Jianwei & Zhang, Zaoxiao, 2022. "Design and multi-objective optimization of low-temperature proton exchange membrane fuel cells with efficient water recovery and high electrochemical performance," Applied Energy, Elsevier, vol. 324(C).
    5. Ma, Haoran & Liu, Junheng & Liang, Wenwen & Li, Jiyu & Zhao, Wenyao & Sun, Ping & Ji, Qian, 2024. "Effects of PEMFC cooling channel insulation coating on heat transfer and electrical discharge characteristics of nanofluid coolants," Applied Energy, Elsevier, vol. 357(C).
    6. Yuzhen Xia & Hangwei Lei & Xiaojun Wu & Guilin Hu & Hao Pan & Baizeng Fang, 2023. "Design of New Test System for Proton Exchange Membrane Fuel Cell," Energies, MDPI, vol. 16(2), pages 1-11, January.
    7. Lu, Guolong & Liu, Mingxin & Su, Xunkang & Zheng, Tongxi & Luan, Yang & Fan, Wenxuan & Cui, Hao & Liu, Zhenning, 2024. "Study on counter-flow mass transfer characteristics and performance optimization of commercial large-scale proton exchange membrane fuel cells," Applied Energy, Elsevier, vol. 359(C).
    8. Zhu, Kai-Qi & Ding, Quan & Zhang, Ben-Xi & Xu, Jiang-Hai & Li, Dan-Dan & Yang, Yan-Ru & Lee, Duu-Jong & Wan, Zhong-Min & Wang, Xiao-Dong, 2024. "Performance enhancement of air-cooled PEMFC stack by employing tapered oblique fin channels: Experimental study of a full stack and numerical analysis of a typical single cell," Applied Energy, Elsevier, vol. 358(C).
    9. Zhou, Yu & Chen, Ben, 2023. "Investigation of optimization and evaluation criteria for flow field in proton exchange membrane fuel cell: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    10. Asadi, Mohammad Reza & Ghasabehi, Mehrdad & Ghanbari, Sina & Shams, Mehrzad, 2024. "The optimization of an innovative interdigitated flow field proton exchange membrane fuel cell by using artificial intelligence," Energy, Elsevier, vol. 290(C).
    11. Yulin Wang & Xiangling Liao & Guokun Liu & Haokai Xu & Chao Guan & Huixuan Wang & Hua Li & Wei He & Yanzhou Qin, 2023. "Review of Flow Field Designs for Polymer Electrolyte Membrane Fuel Cells," Energies, MDPI, vol. 16(10), pages 1-54, May.
    12. Huang, Haozhong & Li, Xuan & Li, Songwei & Guo, Xiaoyu & Liu, Mingxin & Wang, Tongying & Lei, Han, 2023. "Evaluating the effect of refined flow channels in a developed biomimetic flow field on PEMFC performance," Energy, Elsevier, vol. 266(C).
    13. Kermani, M.J. & Moein-Jahromi, M. & Hasheminasab, M.R. & Ebrahimi, F. & Wei, L. & Guo, J. & Jiang, F.M., 2022. "Application of a foam-based functionally graded porous material flow-distributor to PEM fuel cells," Energy, Elsevier, vol. 254(PB).
    14. Zhu, Xinning & Liu, Rongkang & Su, Liang & Wang, Xi & Chu, Xuyang & Ma, Yao & Wu, Linjing & Song, Guangji & Zhou, Wei, 2023. "Synergistic mass transfer and performance stability of a proton exchange membrane fuel cell with traveling wave flow channels," Energy, Elsevier, vol. 285(C).
    15. Wang, Yulin & Wang, Han & Wang, Guozhuo & Li, Hua & Zhao, Yulong & He, Wei, 2023. "Enhancement of water droplet drainage performance in a cathode flow channel with baffles for a polymer electrolyte membrane fuel cell," Renewable Energy, Elsevier, vol. 219(P1).
    16. Zhang, Yong & He, Shirong & Jiang, Xiaohui & Xiong, Mu & Ye, Yuntao & Yang, Xi, 2023. "Three-dimensional multi-phase simulation of proton exchange membrane fuel cell performance considering constriction straight channel," Energy, Elsevier, vol. 267(C).
    17. Zhang, Xiaoqing & Yang, Jiapei & Ma, Xiao & Zhuge, Weilin & Shuai, Shijin, 2022. "Modelling and analysis on effects of penetration of microporous layer into gas diffusion layer in PEM fuel cells: Focusing on mass transport," Energy, Elsevier, vol. 254(PA).
    18. Lei Li & Yude Wu & Yi Lu & Xiao Yang & Qiyang Wang & Xiaoai Wang & Yulin Wang, 2022. "Numerical Simulation on the Structural Design of a Multi-Pore Water Diffuser during the External Ice Melting Process of an Ice Storage System," Energies, MDPI, vol. 15(6), pages 1-17, March.
    19. Zhang, Xin & Li, Jingwen & Xiong, Yi & Ang, Yee Sin, 2022. "Efficient harvesting of low-grade waste heat from proton exchange membrane fuel cells via thermoradiative power devices," Energy, Elsevier, vol. 258(C).
    20. Lu, Guolong & Fan, Wenxuan & Lu, Dafeng & Zhao, Taotao & Wu, Qianqian & Liu, Mingxin & Liu, Zhenning, 2024. "Lung-inspired hybrid flow field to enhance PEMFC performance: A case of dual optimization by response surface and artificial intelligence," Applied Energy, Elsevier, vol. 355(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:364:y:2024:i:c:s0306261924005877. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.