IDEAS home Printed from https://ideas.repec.org/a/adm/journl/v6y2017i3p113-118.html

Preparation, Characterization and Engine Performance of Biodiesel Fuel Derived from Waste Cooking Oil and its Blends

Author

Listed:
  • Muhammad Qasim
  • Tariq Mahmood Ansari
  • Mazhar Hussain

Abstract

The crude oil price hike, depletion of petroleum product reserves and global warming due to fossil fuel emissions has stimulated the researchers to explore alternative energy resources. The objective of this research was to prepare biodiesel from waste cooking oil and to study the performance characteristics in a diesel engine without any modification. In this work, biodiesel was prepared from waste cooking oil collected from a local restaurant in Multan, Pakistan. The prepared biodiesel was blended with petroleum diesel at different proportions and characterized for physicochemical properties using ASTM standard methods. A 5.5-kW water-cooled single-cylinder direct injection diesel engine was used to measure brake Specific fuel consumption (BSFC), brake thermal efficiency (BTE) and exhaust gas temperature of the engine fuelled with petroleume diesel B0, biodiesel blends B10, B15 and B20 fuels.

Suggested Citation

  • Muhammad Qasim & Tariq Mahmood Ansari & Mazhar Hussain, 2017. "Preparation, Characterization and Engine Performance of Biodiesel Fuel Derived from Waste Cooking Oil and its Blends," International Journal of Sciences, Office ijSciences, vol. 6(03), pages 113-118, March.
    • Handle: RePEc:adm:journl:v:6:y:2017:i:3:p:113-118
    DOI: 10.18483/ijSci.1231
    as

    Download full text from publisher

    File URL: https://www.ijsciences.com/pub/article/1231
    Download Restriction: no
    File URL: https://www.ijsciences.com/pub/pdf/V62017031231.pdf
    Download Restriction: no
    File URL: https://libkey.io/10.18483/ijSci.1231?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Ramadhas, A.S. & Jayaraj, S. & Muraleedharan, C., 2005. "Characterization and effect of using rubber seed oil as fuel in the compression ignition engines," Renewable Energy, Elsevier, vol. 30(5), pages 795-803.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Roberto Guimarães Pereira & João Pedro Barbedo Marques Gutierrez & Juan Manuel Pardal & Ivenio Moreira da Silva, 2019. "Use of Soybean, Corn and Palm Biodiesel in a Centrifugal Pump Driven by a Diesel Engine: Performance and Emissions Analysis," International Journal of Sciences, Office ijSciences, vol. 8(05), pages 83-98, May.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhen-Tao Wang & Aleksandar M. Mitrašinović & John Z. Wen, 2012. "Investigation on Electrostatical Breakup of Bio-Oil Droplets," Energies, MDPI, vol. 5(11), pages 1-17, October.
    2. Altarazi, Yazan S.M. & Abu Talib, Abd Rahim & Yu, Jianglong & Gires, Ezanee & Abdul Ghafir, Mohd Fahmi & Lucas, John & Yusaf, Talal, 2022. "Effects of biofuel on engines performance and emission characteristics: A review," Energy, Elsevier, vol. 238(PC).
    3. Atabani, A.E. & Silitonga, A.S. & Ong, H.C. & Mahlia, T.M.I. & Masjuki, H.H. & Badruddin, Irfan Anjum & Fayaz, H., 2013. "Non-edible vegetable oils: A critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 211-245.
    4. Patchimpet, Jaran & Simpson, Benjamin K. & Sangkharak, Kanokphorn & Klomklao, Sappasith, 2020. "Optimization of process variables for the production of biodiesel by transesterification of used cooking oil using lipase from Nile tilapia viscera," Renewable Energy, Elsevier, vol. 153(C), pages 861-869.
    5. Hasan, M.M. & Rahman, M.M., 2017. "Performance and emission characteristics of biodiesel–diesel blend and environmental and economic impacts of biodiesel production: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 938-948.
    6. Sureshkumar, K. & Velraj, R. & Ganesan, R., 2008. "Performance and exhaust emission characteristics of a CI engine fueled with Pongamia pinnata methyl ester (PPME) and its blends with diesel," Renewable Energy, Elsevier, vol. 33(10), pages 2294-2302.
    7. Banapurmath, N.R. & Tewari, P.G. & Gaitonde, V.N., 2012. "Experimental investigations on performance and emission characteristics of Honge oil biodiesel (HOME) operated compression ignition engine," Renewable Energy, Elsevier, vol. 48(C), pages 193-201.
    8. No, Soo-Young, 2011. "Inedible vegetable oils and their derivatives for alternative diesel fuels in CI engines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 131-149, January.
    9. Jayed, M.H. & Masjuki, H.H. & Saidur, R. & Kalam, M.A. & Jahirul, M.I., 2009. "Environmental aspects and challenges of oilseed produced biodiesel in Southeast Asia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2452-2462, December.
    10. Daho, Tizane & Vaitilingom, Gilles & Ouiminga, Salifou K. & Piriou, Bruno & Zongo, Augustin S. & Ouoba, Samuel & Koulidiati, Jean, 2013. "Influence of engine load and fuel droplet size on performance of a CI engine fueled with cottonseed oil and its blends with diesel fuel," Applied Energy, Elsevier, vol. 111(C), pages 1046-1053.
    11. M.H.H. Ishak & Farzad Ismail & Sharzali Che Mat & M.Z. Abdullah & M.S. Abdul Aziz & M.Y. Idroas, 2019. "Numerical Analysis of Nozzle Flow and Spray Characteristics from Different Nozzles Using Diesel and Biofuel Blends," Energies, MDPI, vol. 12(2), pages 1-25, January.
    12. Ramadhas, A.S. & Muraleedharan, C. & Jayaraj, S., 2005. "Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil," Renewable Energy, Elsevier, vol. 30(12), pages 1789-1800.
    13. Melvin Jose, D.F. & Edwin Raj, R. & Durga Prasad, B. & Robert Kennedy, Z. & Mohammed Ibrahim, A., 2011. "A multi-variant approach to optimize process parameters for biodiesel extraction from rubber seed oil," Applied Energy, Elsevier, vol. 88(6), pages 2056-2063, June.
    14. Azad, A.K. & Rasul, M.G. & Khan, M.M.K. & Sharma, Subhash C. & Hazrat, M.A., 2015. "Prospect of biofuels as an alternative transport fuel in Australia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 331-351.
    15. Jisieike, Chiazor Faustina & Ishola, Niyi Babatunde & Latinwo, Lekan M. & Betiku, Eriola, 2023. "Crude rubber seed oil esterification using a solid catalyst: Optimization by hybrid adaptive neuro-fuzzy inference system and response surface methodology," Energy, Elsevier, vol. 263(PB).
    16. Gogoi, T.K. & Baruah, D.C., 2011. "The use of Koroch seed oil methyl ester blends as fuel in a diesel engine," Applied Energy, Elsevier, vol. 88(8), pages 2713-2725, August.
    17. Basha, Syed Ameer & Gopal, K. Raja & Jebaraj, S., 2009. "A review on biodiesel production, combustion, emissions and performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(6-7), pages 1628-1634, August.
    18. Oumer, A.N. & Hasan, M.M. & Baheta, Aklilu Tesfamichael & Mamat, Rizalman & Abdullah, A.A., 2018. "Bio-based liquid fuels as a source of renewable energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 88(C), pages 82-98.
    19. Mahmudul, H.M. & Hagos, F.Y. & Mamat, R. & Adam, A. Abdul & Ishak, W.F.W. & Alenezi, R., 2017. "Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 497-509.
    20. Li, Shiwu & Wang, Yunpeng & Dong, Shengwu & Chen, Yang & Cao, Fenghua & Chai, Fang & Wang, Xiaohong, 2009. "Biodiesel production from Eruca Sativa Gars vegetable oil and motor, emissions properties," Renewable Energy, Elsevier, vol. 34(7), pages 1871-1876.

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:adm:journl:v:6:y:2017:i:3:p:113-118. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Staff ijSciences The email address of this maintainer does not seem to be valid anymore. Please ask Staff ijSciences to update the entry or send us the correct address (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.