Printed from https://ideas.repec.org/s/taf/gcmbxx4.html
Content
October 2020, Volume 23, Issue S1
- 125-127 Mechanical properties of 3D tumor spheroids measured by AFM
by A. Giannetti & J. Revilloud & C. Verdier - 128-129 Biomechanical comparison of two suturing techniques during Achilles tendinoplasty in dogs: preliminary results
by B. Goin & P. Buttin & T. Cachon & E. Viguier - 130-132 Rapid modeling: a surgical proof-of-concept explained by hemodynamics modeling
by N. Golse & F. Joly & Q. Nicolas & E. Vibert & P. D. Lin & I. Vignon-Clementel - 133-135 In vitro study of proximal cancellous bone loss effect in the dental implant stability
by Cátia Gomes & M. Mesnard & A. Ramos - 136-138 Prediction of plausible locomotion using nonlinear kinematic optimization
by N. Hareng & B. Watier & F. Multon - 139-141 Biomechanical fidelity assessment of a pick and place task with haptic feedback in virtual reality
by Simon Hilt & Charles Pontonnier & Georges Dumont - 142-144 Quantification of abdominal and back muscles forces: calibration for the Sorensen test
by S. Hinnekens & P. Mahaudens & C. Detrembleur & P. Fisette - 145-147 A phenomenological and multiscale modeling of arterial growth and remodeling under endofibrosis
by J. Jansen & X. Escriva & F. S. Godeferd & P. Feugier - 148-150 Numerical optimization method for estimating the individual musculo-tendon forces for ergonomic assessment
by Olfa Jemaa & Sami Bennour & David Daney & Lotfi Romdhane - 151-152 Retinal micro-vascular network: data and model
by L. Julien & J. Ventre & P.-Y Lagrée & A. Ramkhelawon & F. Rossant & M. Atlan & M. Paques & J.-M. Fullana - 153-155 Residual type B aortic dissection FSI modeling
by F. Khannous & C. Guivier-Curien & M. Gaudry & P. Piquet & V. Deplano - 156-158 Analysis of the biomechanical parameters of the lineout throwing performance under distance variable conditions in high level rugby players
by A. Kneblewski & L. Valdes-Tamayo & S. Laporte & B. Sandoz & S. Blanchard & P. Rouch - 159-161 Effect of bow drawing technique on skilled archer postural stability: a case study
by A. Kuch & J.-F. Debril & M. Domalain & R. Tisserand & T. Monnet - 162-163 Use of an instrumented hammer as a decision support system during rhinoplasty: validation on an animal model
by L. Lamassoure & J. Giunta & G. Rosi & A.S. Poudrel & R. Bosc & G. Haïat - 164-165 Experimental modal analysis of a standard wheelchair: a preliminary study
by O. Larivière & D. Chadefaux & C. Sauret & P. Thoreux - 166-168 How do the effective bone properties evolve during normal and pathological calcification?
by Cédric Laurent & Adrien Baldit & Maude Ferrari & Jean-Christophe Perrin & Alexandre Marano & Arnaud Bianchi & Hervé Kempf - 169-171 Airborne ultrasound measurement of posturo-respiratory interaction
by Y. Lespert & V. Attali & T. Similowski & B. Sandoz & R.K. Ing - 172-174 Evaluation of a simple characterisation method of the 3D-position of a manual wheelchair centre of mass
by J. Loisel & J. Bascou & Y. Poulet & C. Sauret - 175-177 Impacts characterisation in Rugby Union
by Florent Lokteff & Remy Canet & Saad Drissi & Pierre Moretto - 178-179 Influence of dental implant designs on the strain at the peri-implant cortical bone: a finite element study
by J. J. Londono & A. Ramos & S. Correa & M. Mesnard - 180-182 Development of a finite-element muscle model accounting for transverse loading
by M. Maamir & L. Chèze & B. Fréchède - 183-185 A minimal biomechanical model for random cell migration
by I. Manifacier & A. Chauvière & C. Verdier & G. Chagnon & I. Cheddadi & N. Glade & A. Stéphanou - 186-188 Gait analysis comparison of two twins: one healthy and one with spastic cerebral palsy
by M. Marchitto & S. Otmani & B. Watier - 189-191 Comparison of human experimental trajectories and simulations during gait
by I. Maroger & O. Stasse & B. Watier - 192-193 Estimating the GRF under one foot knowing the other one during table tennis strokes: a preliminary study
by T. Marsan & P. Rouch & P. Thoreux & R. Jacquet-Yquel & C. Sauret - 194-196 A micromechanical framework of arterial tissue growth in the context of medial calcification
by M. Martin & S. Avril & C. Morin - 197-199 Calibration of the fat and muscle hyperelastic material parameters for the assessment of the internal tissue deformation in relation to pressure ulcer prevention
by E. Mukhina & P.-Y. Rohan & N. Connesson & Y. Payan - 200-202 Quasi-stiffness of intrinsic foot joints during the mid-stance of gait in a healthy population
by A. Naaim & R. Dumas & L. Cheze & J. L. Besse & B. Devos Bevernage & T. Leemrijse & P. A. Deleu - 203-205 Studying the effects of facial muscles activations to investigate the optimum positioning of subcutaneous suspension sutures
by M. A. Nazari & P. Perrier & J. Meadows & M-O Christen & A. Mojallal & Y. Payan - 206-208 Haemostatic sponges as an alternative to granular bone substitute for sinus lifts
by S. Okley & C. Mauprivez & P. Prada & M. Dubus & F. Velard & R. Rahouadj & H. Kerdjoudj & A. Baldit - 209-211 Comparison of adults and children anthropometric tables: mass segment distribution
by S. Otmani & M. Marchitto & G. Michon & B. Watier - 212-214 Finite element analysis for prediction of adolescent bone strength: micro vs continuum models
by S. Ouhsousou & M. Revel & J. Bacchetta & H. Follet - 215-217 Comparison of lower limb calibration methods for movement analysis with inertial measurement unit (IMU)
by L. Pacher & C. Chatellier & R. Vauzelle & L. Fradet - 218-220 Patient-specific, multiscale, myocardial blood flow simulation for coronary artery disease
by L. Papamanolis & H. J. Kim & C. Jaquet & M. Sinclair & M. Schaap & I. Danad & P. van Diemen & P. Knaapen & L. Najman & H. Talbot & C. A. Taylor & I. E. Vignon-Clementel - 221-222 Multiscale mechanical characterization of knitted abdominal wall repair meshes
by Baptiste Pierrat & Nahime Al Abiad & Anicet Le Ruyet & Stéphane Avril - 223-225 An experimental study of hamstring muscle rupture under different loading modes
by Baptiste Pillet & Pierre Badel & Pascal Edouard & Baptiste Pierrat - 226-228 Influence of different footwear on mediolateral stability during gait at different speeds in healthy people
by E. Polomé & N. Théveniau & C. Vigier & R. Dumas & T. Robert - 229-231 Biomechanical plausibility of the lucanian fresco tomb proto-gladiators paintings of Paestum: a pilot study
by C. Pontonnier & S. Salvan - 232-234 Lumbar lordosis obtained with and without intervertebral thoracic spine motions during rhythmic gymnastics movements: a preliminary study
by Y. Poulet & C. Eyssartier & T. Marsan & L. Valdes-Tamayo & M. Robert & P. Billard & P. Rouch & P. Thoreux & C. Sauret - 235-237 Development of MR elastography method to characterize the elastic property of the sterno-cleido-mastoid (SCM) muscle
by P. Pouletaut & F. Charleux & B. Devauchelle & J.M. Constans & R. Ternifi & S. Boussida & A. Hamaoui & C. Krzisch & S.F. Bensamoun - 238-240 Hip joint dynamics during the BMX gate start: a case study
by D. Princelle & M. Domalain & J. F. Debril & E. Brunet & J. Sastre & T. Monnet - 241-243 Impact of exhaustion level on tibial acceleration signature of amateur runners
by T. Provot & A. Najdem & L. Valdes-Tamayo & X. Chiementin - 244-246 Generic kinematical models of the French soldier from a clustered anthropometric database
by Pierre Puchaud & Georges Dumont & Nicolas Bideau & Charles Pontonnier - 247-249 Comparison of two methods of fixation with interference screw for cranial cruciate ligament reconstruction in canine cadaver model
by P. Rafael & B. Goin & P. Buttin & T. Cachon & E. Viguier - 250-252 Assessment of the permeability of a microvessel-on-chip to small and large molecules
by C. Ramón-Lozano & C. A. Dessalles & A. Babataheri & A. I. Barakat - 253-254 A comparison of conventional and machinable PMMA materials for denture
by G. Ravalec & L. Sadoun & G. Rohman & W. Pacquet & C. Hatege-Kimana & C. Hollmann & O. Desruelle & C. Wulfman - 255-256 Agent-based modelling of the smooth muscle cells migration induced by mechanical vibration: a preliminary study
by M. Reda & C. Noel & N. Settembre & J. Chambert & A. Lejeune & E. Jacquet - 257-259 Specimen-specific finite element prediction of surface strain at the distal radius in a fall configuration
by M. Revel & F. Bermond & D. Mitton & H. Follet - 260-261 Ex vivo experiments on femurs to assess metastatic bone strength
by L. Riglet & C. Confavreux & P. Chaudier & J.-B Pialat & F. Bermond & M. Gardegaront & H. Follet & D. Mitton - 262-264 Intra- and inter- session reliability of a new method for evaluating toes flexor strength: preliminary study
by J. Rossi & T. Besson & D. Poncet & G. Y. Millet & C. Y .M. Morio - 265-267 Biomechanical analysis of different knee angle starting positions in nordic hamstring exercise: preliminary study
by J. Rossi & S. Vitulli & D. Poncet & P. Edouard & H. Largeron & S. Sangnier - 268-269 Ex vivo biomechanical evaluation of the primary stability of three different types of femoral stems for total hip replacement in dogs
by C. Saban & E. Viguier & M. Taroni & A. Baldinger & M. Blondel & C. Carozzo & P. Moissonnier & T. Cachon - 270-272 Clinical outcomes and functional recovery after temporomandibular joint replacement: a six-month follow-up study
by E. Sapin-de Brosses & A.-S Bonnet & N. Zwetyenga - 273-275 Dynamic characterisation of the temporomandibular joint disc using split Hopkinson pressure bars
by A. Schmitt & D. Sory & L. Tappert & P. Lipinski & W. Proud & A. Baldit - 276-278 Strain release assessment of the iliotibial band (ITB) when using a pie-crusting technique: a preliminary ex vivo study
by Y. Sednieva & K. Bruyère-Garnier & A. Naaim & A. Viste & L. L. Gras - 279-281 In-situ tensile test under microtomography to characterize mechanical behavior of ethmoid bone: a preliminary study
by V. Serantoni & N. Faraj & G. Subsol & E. Rondet & L. Ollier & G. Captier & F. Jourdan & V. Favier - 282-284 3D distribution of the forces applied on a load transported by a dyad
by N. Sghaier & G. Fumery & V. Fourcassie & P. Moretto - 285-287 Development of a wearable framework for body center of mass acceleration assessment in people with transfemoral amputation
by E. Simonetti & E. Bergamini & J. Bascou & G. Vannozzi & H. Pillet - 288-290 Pullout strength of K-wires: optimal solutions analysis
by L. Tamiti & S. Braymand & N. Bahlouli & H. Jmal & S. Facca - 291-293 Identification of macro-heterogenous mechanical behaviour of temporomandibular joint disc
by L. K. Tappert & A. Baldit & C Guillaume & F Velard & P. Lipinski - 294-296 Implementing a test to assess reaction, attention and inhibition capacity in elderly
by Juan De la Torre & Vincent Bonnet & Rafael Mauti & Pascal Chabaud & Thomas Robert - 297-299 Investigation of microstructure evolution and mechanical properties in cardiac tissue
by N. Tueni & J. Vizet & M. Genet & A. Pierangelo & J. M. Allain - 300-302 Intraventricular vector flow mapping 3-D by triplane Doppler echocardiography
by F. Vixege & P. Y. Courand & P. Blanc-Benon & S. Mendez & F. Nicoud & D. Vray & D. Garcia - 303-305 Morphological characterization of defects in all-ceramic crown adhesive layer
by Y. Yasothan & K. Shindo & N. Schmitt & E. Vennat
December 2020, Volume 23, Issue 16
- 1277-1286 A compressible anisotropic hyperelastic model with I5 and I7 strain invariants
by MN Wang & FJ Liu - 1287-1296 A numerical study to determine the effect of strengthening and weakening of the transversus abdominis muscle on lumbar spine loads
by Katarzyna Nowakowska-Lipiec & Robert Michnik & Paweł Linek & Andrzej Myśliwiec & Katarzyna Jochymczyk-Woźniak & Marek Gzik - 1297-1305 Effect of sagittal split ramus osteotomy on stress distribution of temporomandibular joints in patients with mandibular prognathism under symmetric occlusions
by Hedi Ma & Jingheng Shu & Quanyi Wang & Haidong Teng & Zhan Liu - 1306-1316 Directed jaya algorithm for delivering nano-robots to cancer area
by Doaa Ezzat & Safaa Amin & Howida A. Shedeed & Mohamed F. Tolba - 1317-1335 A continuum thermomechanical model for the electrosurgery of soft hydrated tissues using a moving electrode
by Wafaa Karaki & Rahul & Carlos A. Lopez & Diana-Andra Borca Tasciuc & Suvranu De - 1336-1346 Development and validation of a finite element model of a small female pedestrian
by Wansoo Pak & Yunzhu Meng & Jeremy Schap & Bharath Koya & F. Scott Gayzik & Costin D. Untaroiu - 1347-1359 The effects of Alzheimer's disease related striatal pathologic changes on the fractional amplitude of low-frequency fluctuations
by Yuksel Cakir - 1360-1376 Three-dimensional finite element analysis of initial displacement and stress on the craniofacial structures of unilateral cleft lip and palate model during protraction therapy with variable forces and directions
by Shahistha Parveen & Akhter Husain & Srinivas Gosla Reddy & Rohan Mascarenhas & Satish Shenoy - 1377-1386 Influence of lubricating conditions on the two-body wear behavior and hardness of titanium alloys for biomedical applications
by Efe Çetin Yilmaz - 1387-1394 Comparison of 3 supraspinatus tendon repair techniques – a 3D computational finite element analysis
by C. Quental & J. Reis & J. Folgado & J. Monteiro & M. Sarmento
November 2020, Volume 23, Issue 15
- 1163-1179 Biomechanical performance design of joint prosthesis for medical rehabilitation via generative structure optimization
by Jinghua Xu & Kang Wang & Mingyu Gao & Zhengxin Tu & Shuyou Zhang & Jianrong Tan - 1180-1189 Automated gap-filling for marker-based biomechanical motion capture data
by Jonathan Camargo & Aditya Ramanathan & Noel Csomay-Shanklin & Aaron Young - 1190-1200 Numerical simulation of deformed red blood cell by utilizing neural network approach and finite element analysis
by Ying Wang & Jianbing Sang & Rihan Ao & Yu Ma & Bowei Fu - 1201-1214 Predicting population level hip fracture risk: a novel hierarchical model incorporating probabilistic approaches and factor of risk principles
by Daniel R. Martel & Martin Lysy & Andrew C. Laing - 1215-1224 A global sensitivity analysis approach applied to a multiscale model of microvascular flow
by L. Possenti & S. Di Gregorio & G. Casagrande & M. L. Costantino & T. Rancati & P. Zunino - 1225-1235 Estimation of joint contact pressure in the index finger using a hybrid finite element musculoskeletal approach
by Barthélémy Faudot & Jean-Louis Milan & Benjamin Goislard de Monsabert & Thomas Le Corroller & Laurent Vigouroux - 1236-1246 Investigation of dynamic deformation of the midbrain in rear-end collision using human brain FE model
by Noritoshi Atsumi & Masami Iwamoto & Yuko Nakahira & Yoshitaka Asano & Jun Shinoda - 1247-1259 Test-retest validation of a cranial deformity index in unilateral coronal craniosynostosis
by Emilie Robertson & Peter Kwan & Gorman Louie & Pierre Boulanger & Daniel Aalto - 1260-1266 Quantification of upper body strategy during gait in children with spastic diplegia using a summary parameter
by Veronica Cimolin & Claudia Condoluci & Carlotta Maria Manzia & Gabriella di Girolamo & Manuela Galli - 1267-1276 Using intravascular ultrasound image-based fluid-structure interaction models and machine learning methods to predict human coronary plaque vulnerability change
by Liang Wang & Dalin Tang & Akiko Maehara & Zheyang Wu & Chun Yang & David Muccigrosso & Mitsuaki Matsumura & Jie Zheng & Richard Bach & Kristen L. Billiar & Gregg W. Stone & Gary S. Mintz
October 2020, Volume 23, Issue 14
- 1041-1051 Enhancing the bone healing on electrical stimuli through the dental implant
by Letícia Bins-Ely & Daniela Suzuki & Ricardo Magini & Cesar A. M. Benfatti & Wim Teughels & Bruno Henriques & Júlio C. M. Souza - 1052-1059 Deep learning approach for prediction of impact peak appearance at ground reaction force signal of running activity
by Anastasiia Girka & Juha-Pekka Kulmala & Sami Äyrämö - 1060-1070 Regional assessment of vascular morphology and hemodynamics: methodology and evaluation for abdominal aortic aneurysms after endovascular repair
by Javier Dottori & Mariano Casciaro & Damian Craiem & Salma El-Batti & Elie Mousseaux & Jean-Marc Alsac & Ignacio Larrabide - 1094-1101 Changes in symmetry during gait in adults with Prader-Willi syndrome
by Veronica Cimolin & Massimiliano Pau & Nicola Cau & Bruno Leban & Micaela Porta & Paolo Capodaglio & Alessandro Sartorio & Graziano Grugni & Manuela Galli
July 2020, Volume 23, Issue 14
- 1071-1081 Individual muscle contributions to hip joint-contact forces during walking in unilateral transfemoral amputees with osseointegrated prostheses
by Vahidreza Jafari Harandi & David Charles Ackland & Raneem Haddara & L. Eduardo Cofré Lizama & Mark Graf & Mary Pauline Galea & Peter Vee Sin Lee - 1082-1093 Finite element modal analysis and harmonic response analysis of human arm grasping model
by Shuang Liu & Hongmei Xu & Yujun Shang & Wei Jiang & Jiajun Dong - 1102-1108 Use of the normalcy index for the assessment of abnormal gait in the anterior cruciate ligament deficiency combined with meniscus injury
by Xiaode Liu & Hongshi Huang & Shuang Ren & Qiguo Rong & Yingfang Ao - 1109-1116 Biomechanical evaluation of anterior and posterior lumbar surgical approaches on the adjacent segment: a finite element analysis
by Bingjin Wang & Wencan Ke & Wenbin Hua & Saideng Lu & Xianlin Zeng & Cao Yang - 1117-1126 Influence of glenohumeral joint muscle insertion on moment arms using a finite element model
by M. Hoffmann & M. Begon & Y. Lafon & S. Duprey - 1127-1137 Bulk Fill flow resin contraction using 3D finite element model and calibration by Fiber Bragg Grating measurement
by Claudio Antunes Junior & Emílio Graciliano Ferreira Mercuri & Ana Paula Gebert de Oliveira Franco & Manoella Costa & Leandro Zen Karam & Hypolito José Kalinowski & Osnara Maria Mongruel Gomes - 1138-1161 Image-based finite-element modeling of the human femur
by Cristina Falcinelli & Cari Whyne
October 2020, Volume 23, Issue 13
- 923-933 Innovative decision support for scoliosis brace therapy based on statistical modelling of markerless 3D trunk surface data
by Stephan Rothstock & Hans-Rudolf Weiss & Daniel Krueger & Victoria Kleban & Lothar Paul - 934-944 Finite element models can reproduce the effect of nucleotomy on the multi-axial compliance of human intervertebral discs
by Marc A. Stadelmann & Roland Stocker & Ghislain Maquer & Sven Hoppe & Peter Vermathen & Ron N. Alkalay & Philippe K. Zysset - 945-958 Robust evolutionary shape optimization for ergonomic excellence based on contact pressure distribution
by Igor Pehnec & Ivo Marinić-Kragić & Damir Vučina - 959-967 The influence of musculoskeletal forces on the growth of the prenatal cortex in the ilium: a finite element study
by Peter J. Watson & Michael J. Fagan & Catherine A. Dobson - 968-980 Numerical analysis of local non-equilibrium heat transfer in layered spherical tissue during magnetic hyperthermia
by Kuo-Chi Liu & Yu-Ching Yang - 981-986 A comparison between the mechanical properties of the hepatic round ligament and the portal vein: a clinical implication on surgical reconstruction of the portal and superior mesenteric veins
by Wentao Zhu & Rongqiang Song & Xuefeng Cao & Lei Zhou & Qiang Wei & Haibin Ji & Rongzhan Fu - 987-1004 An image-based geometric model for numerical simulation of blood perfusion within the liver lobules
by R. Ahmadi-Badejani & M. Mosharaf-Dehkordi & H. Ahmadikia - 1005-1013 Effect of the dimensions of implant body and thread on bone resorption and stability in trapezoidal threaded dental implants: a sensitivity analysis and optimization
by Mohammad Reza Niroomand & Masoud Arabbeiki - 1014-1025 Predicting longitudinal changes in joint contact forces in a juvenile population: scaled generic versus subject-specific musculoskeletal models
by Claude Fiifi Hayford & Erica Montefiori & Emma Pratt & Claudia Mazzà - 1026-1033 Accurate reconstructions of pelvic defects and discontinuities using statistical shape models
by Alexander Meynen & Harold Matthews & Nele Nauwelaers & Peter Claes & Michiel Mulier & Lennart Scheys - 1034-1040 Thread shape affects the stress distribution of torque force on miniscrews: a finite element analysis
by Yu-shan Ye & Wei-min Yi & Pei-lin Zhuang & Mo Liu & Yan-song Yu & Ying-juan Lu & Qing-he Yao & Wei Wang & Shao-hai Chang
September 2020, Volume 23, Issue 12
- 805-814 Percutaneous posterior full-endoscopic cervical foraminotomy and discectomy: a finite element analysis and radiological assessment
by Wencan Ke & Jinggang Zhi & Wenbin Hua & Bingjin Wang & Saideng Lu & Lina Fan & Li Li & Cao Yang - 815-831 Computational model of stent-based delivery from a half-embedded two-layered coating
by Sarifuddin & Somnath Roy & Prashanta Kumar Mandal - 832-843 Contribution of injured posterior ligamentous complex and intervertebral disc on post-traumatic instability at the cervical spine
by Marie-Hélène Beauséjour & Yvan Petit & Jeremy Hagen & Pierre-Jean Arnoux & Jean-Marc Mac Thiong & Eric Wagnac - 844-853 A strathclyde cluster model for gait kinematic measurement using functional methods: a study of inter-assessor reliability analysis with comparison to anatomical models
by Lin Meng & Lindsay Millar & Craig Childs & Arjan Buis - 854-867 Multi-objective reliability based design optimization using Kriging surrogate model for cementless hip prosthesis
by Khalil Dammak & Abdelkhalak El Hami - 868-878 Application of an enhanced homogenization technique to the structural multiscale analysis of a femur bone
by M. Marques & J. Belinha & A. F. Oliveira & M. C. Manzanares Céspedes & R. M Natal Jorge - 879-887 Non - invasive modelling methodology for the diagnosis of coronary artery disease using fuzzy cognitive maps
by Ioannis D. Apostolopoulos & Peter P. Groumpos - 888-893 Effectiveness of robot-assisted gait training on patients with burns: a preliminary study
by So Young Joo & Seung Yeol Lee & Yoon Soo Cho & Kuem Ju Lee & Sang-Hyun Kim & Cheong Hoon Seo - 894-905 Numerical study of hemodynamic and diagnostic parameters affected by stenosis in bifurcated artery
by Jianfei Song & Smaine Kouidri & Farid Bakir - 906-913 Biomechanical effects of screw orientation and plate profile on tibial condylar valgus osteotomy - Finite-element analysis
by Chih-Ting Cheng & Chu-An Luo & Yi-Chih Chen - 914-921 Relative contributions and capacities of lower extremity muscles to accelerate the body’s center of mass during countermovement jumps
by Kristof Kipp & Hoon Kim
August 2020, Volume 23, Issue 11
- 675-689 Effect of gap outside contact area on lubrication of metal-on-Metal total hip replacement
by Ali A. Al-Saffar & Sam L. Evans - 690-702 Development of a test method for adult ice hockey helmet evaluation
by Andrew Post & Lauren Dawson & T. Blaine Hoshizaki & Michael D. Gilchrist & Michael D. Cusimano - 703-709 Two efficient static optimization algorithms that account for muscle-tendon equilibrium: approaching the constraint Jacobian via a constant or a cubic spline function
by Benjamin Michaud & Mickaël Begon - 710-717 Outbreak dynamics of COVID-19 in Europe and the effect of travel restrictions
by Kevin Linka & Mathias Peirlinck & Francisco Sahli Costabal & Ellen Kuhl - 718-733 Prediction of patellofemoral joint kinematics and contact through co-simulation of rigid body dynamics and nonlinear finite element analysis
by Jacobus H. Müller & Swithin Razu & Ahmet Erdemir & Trent M. Guess - 734-743 Positioning human body models for crashworthiness using model order reduction
by G. Bacquaert & C. Bach & D. Draper & S. Peldschus & F. Duddeck - 744-754 Numerical study to identify the effect of fluid presence on the mechanical behavior of the stents during coronary stent expansion
by Wookjin Lee & Seong Wook Cho & Usaid K. Allahwala & Ravinay Bhindi - 755-764 Development and calibration of a probabilistic finite element hip capsule representation
by Casey A. Myers & Clare K. Fitzpatrick & Daniel N. Huff & Peter J. Laz & Paul J. Rullkoetter - 765-772 What are the effects of simulated muscle weakness on the sit-to-stand transfer?
by Elena J. Caruthers & Grant Schneider & Laura C. Schmitt & Ajit M. W. Chaudhari & Robert A. Siston - 773-784 Fatigue damage prediction in the annulus of cervical spine intervertebral discs using finite element analysis
by Adhitya V. Subramani & Phillip E. Whitley & Harsha T. Garimella & Reuben H. Kraft - 785-803 Forward and inverse dynamics modeling of human shoulder-arm musculoskeletal system with scapulothoracic constraint
by Tingli Hu & Johannes Kühn & Sami Haddadin
July 2020, Volume 23, Issue 10
- 557-563 Contribution of foot joints in the energetics of human running
by Kevin Deschamps & Giovanni Matricali & Helen Peters & Maarten Eerdekens & Sander Wuite & Alberto Leardini & Filip Staes - 564-570 Fatigue effects on the viscoelastic behavior of men and women in a landing task: a Mass–Spring–Damper modeling approach
by Sahar Boozari & Mohammad Ali Sanjari & Ali Amiri & Ismail Ebrahimi Takamjani - 571-584 The effect of Womersley number and particle radius on the accumulation of lipoproteins in the human aorta
by Xueping Chen & Jian Zhuang & Yueheng Wu - 585-596 A finite element analysis of the intra-abdominal pressure and paraspinal muscle compartment pressure interaction through the thoracolumbar fascia
by Khaled El-Monajjed & Mark Driscoll - 597-600 An in silico rat liver atlas
by Harvey Ho & Uta Dahmen & Peter Hunter - 601-610 Effect of metastatic lesion size and location on the load-bearing capacity of vertebrae using an optimized ash density-modulus equation
by Sebastian Saldarriaga & Simon Jimenez Cataño & Asghar Rezaei & Hugo Giambini - 611-626 Development of a novel hybrid method combining finite difference method and dissipative particle dynamics to simulate thrombus formation on orifice flow
by Y. Yi & M. Tamagawa - 627-641 Analysis of temporomandibular joint dysfunction in paediatric patients with unilateral crossbite using automatically generated finite element models
by Javier Ortún-Terrazas & José Cegoñino & Edson Illipronti-Filho & Amaya Pérez del Palomar - 642-648 Integration of cortical thickness data in a statistical shape model of the scapula
by Jonathan Pitocchi & Roel Wirix-Speetjens & G. Harry van Lenthe & María Ángeles Pérez - 649-657 Using artificial neural networks to predict impingement and dislocation in total hip arthroplasty
by D. Alastruey-López & L. Ezquerra & B. Seral & M. A. Pérez - 658-663 A custom musculoskeletal model for estimation of medial and lateral tibiofemoral contact forces during tasks with high knee and hip flexions
by Bruno Luiz Souza Bedo & Danilo S. Catelli & Mario Lamontagne & Paulo Roberto Pereira Santiago - 664-674 Identification of the most relevant intervertebral effort indicators during gait of adolescents with idiopathic scoliosis
by Samadi B & Raison M & Achiche S & Fortin C
July 2020, Volume 23, Issue 9
- 445-455 Is it possible to detect a true rotation axis of the temporomandibular joint with common pantographic methods? A fundamental kinematic analysis
by Albert Mehl - 456-466 Biomechanical analysis of segmental lumbar lordosis and risk of cage subsidence with different cage heights and alternative placements in transforaminal lumbar interbody fusion
by Sajjad Rastegar & Pierre-Jean Arnoux & Xiaoyu Wang & Carl-Éric Aubin - 467-475 The effect of hemodynamic parameters in patient-based coronary artery models with serial stenoses: normal and hypertension cases
by K. E. Hoque & M. Ferdows & S. Sawall & E. E. Tzirtzilakis - 476-483 Hybrid triad provides fracture plane stability in a computational model of a Pauwels Type III hip fracture
by M. Cordeiro & S. Caskey & C. Frank & S. Martin & A. Srivastava & T. Atkinson - 484-490 Simulated anterior translation and medial rotation of the talus affect ankle joint contact forces during vertical hopping
by Hoon Kim & Kristof Kipp - 491-499 Lattice Boltzmann simulation of swelling of an implant for microtia manufactured with IPN hydrogel
by Pedro J. Boschetti & Orlando Pelliccioni & Keisly Da Costa & Marcos A. Sabino - 500-509 Simulated brain strains resulting from falls differ between concussive events of young children and adults
by David Koncan & Michael Gilchrist & Michael Vassilyadi & Thomas B. Hoshizaki - 510-517 Blood transfusion prediction using restricted Boltzmann machines
by Jenny Cifuentes & Yuanyuan Yao & Min Yan & Bin Zheng - 518-523 Impact of screw thread shape on stress transfer in bone: a finite element study
by Emmanuel Tetteh & Matthew B. A. McCullough - 524-535 Visco-elastic behavior of articular cartilage under applied magnetic field and strain-dependent permeability
by Usman Ali & Javed I. Siddique - 536-547 Sensitivities of lumbar segmental kinematics and functional tissue loads in sagittal bending to design parameters of a ball-in-socket total disc arthroplasty prosthesis
by Chaochao Zhou & Ryan Willing - 548-555 The biomechanical study of a modified lumbar interbody fusion—crenel lateral interbody fusion (CLIF): a three-dimensional finite-element analysis
by Yun-lin Chen & Ou-jie Lai & Yang Wang & Wei-hu Ma & Qi-xin Chen
June 2020, Volume 23, Issue 8
- 303-311 A biomechanical model of the pathological aortic valve: simulation of aortic stenosis
by Marcos Loureiro-Ga & Cesar Veiga & Generosa Fdez-Manin & Victor Alfonso Jimenez & Francisco Calvo-Iglesias & Andres Iñiguez - 312-322 Analysis of fiber strain in the human tongue during speech
by Arnold D. Gomez & Maureen L. Stone & Jonghye Woo & Fangxu Xing & Jerry L. Prince - 323-331 Comparison of two different bowel anastomosis types using finite volume method
by Yavuz Pirhan & Kadir Gök & Arif Gök - 332-344 Null strain analysis of submerged aneurysm analogues using a novel 3D stereomicroscopy device
by Brooks A. Lane & Susan M. Lessner & Narendra R. Vyavahare & Michael A. Sutton & John F. Eberth - 345-371 Computational fluid dynamic simulation of two-fluid non-Newtonian nanohemodynamics through a diseased artery with a stenosis and aneurysm
by Ankita Dubey & B. Vasu & O. Anwar Bég & Rama S. R. Gorla & Ali Kadir - 372-383 Assessment of stress/strain in dental implants and abutments of alternative materials compared to conventional titanium alloy—3D non-linear finite element analysis
by Pedro Henrique Wentz Tretto & Mateus Bertolini Fernandes dos Santos & Aloisio Oro Spazzin & Gabriel Kalil Rocha Pereira & Atais Bacchi - 384-395 Minimally invasive transforaminal and anterior lumbar interbody fusion surgery at level L5-S1
by D. S. Fidalgo & B. Areias & L. C. Sousa & M. Parente & R. N. Jorge & H. Sousa & J. M. Gonçalves - 396-407 Atomistic to continuum model for studying mechanical properties of RNA nanotubes
by Shyam Badu & Sanjay Prabhakar & Roderick Melnik & Sundeep Singh - 408-421 Numerical simulation of lateral and transforaminal lumbar interbody fusion, two minimally invasive surgical approaches
by B. Areias & S. C. Caetano & L. C. Sousa & M. Parente & R. N. Jorge & H. Sousa & J. M. Gonçalves - 422-431 Finite element submodeling technique to analyze the contact pressure and wear of hard bearing couples in hip prosthesis
by S. Shankar & R. Nithyaprakash & B. R Santhosh & M. S. Uddin & Alokesh Pramanik - 432-444 On biological availability dependent bone remodeling
by Areti Papastavrou & Ina Schmidt & Paul Steinmann
May 2020, Volume 23, Issue 7
- 261-270 Occlusal load modelling significantly impacts the predicted tooth stress response during biting: a simulation study
by Harnoor Saini & David C. Ackland & Lulu Gong & Leo K. & Cheng & Oliver Röhrle - 271-284 Studying the effects of asymmetry on freestyle swimming using smoothed particle hydrodynamics
by Raymond C. Z. Cohen & Paul W. Cleary & Bruce R. Mason & David L. Pease - 285-294 Optimizing neotissue growth inside perfusion bioreactors with respect to culture and labor cost: a multi-objective optimization study using evolutionary algorithms
by Mohammad Mehrian & Liesbet Geris - 295-302 Biomechanical effects of corticotomy facilitated orthodontic anterior retraction: a 3-dimensional finite element analysis
by Yang Liu & Yan Wu & Chongshi Yang & Jinlin Song & Yubo Fan
April 2020, Volume 23, Issue 6
- 213-223 Characterization of hyperelastic and damage behavior of tendons
by J. A. López-Campos & J. P. S. Ferreira & A. Segade & J. R. Fernández & R. M. Natal - 224-231 Influence of Socket-shield technique on the biomechanical response of dental implant: three-dimensional finite element analysis
by João Paulo Mendes Tribst & Amanda Maria de Oliveira Dal Piva & Alexandre Luiz Souto Borges & Marco Antonio Bottino - 232-247 Effect of asymmetry on the flow behavior in an idealized arterial bifurcation
by Mahesh Nagargoje & Raghvendra Gupta - 248-260 Multisite pacing and myocardial scars: a computational study
by Mohammad Albatat & Jacob Bergsland & Hermenegild Arevalo & Hans Henrik Odland & Samuel Wall & Joakim Sundnes & Ilangko Balasingham
April 2020, Volume 23, Issue 5
- 169-181 Assessment of the shock adsorption properties of bike helmets: a numerical/experimental approach
by Massimiliano Bocciarelli & Valter Carvelli & Stefano Mariani & Matteo Tenni - 182-190 In silico study of glenoid perforation during total shoulder arthroplasty: the effects on stress & micromotion
by Abdul Hadi Abdul Wahab & Amir Putra Md Saad & Ardiyansyah Syahrom & Mohammed Rafiq Abdul Kadir - 191-200 Occupant kinematics and biomechanics during frontal collision in autonomous vehicles—can rotatable seat provides additional protection?
by Hequan Wu & Haibin Hou & Ming Shen & King H. Yang & Xin Jin - 201-211 The influence of the elastic modulus of the plaque in carotid artery on the computed results of FFRCT
by Kesong Xu & Long Yu & Jun Wan & Shengzhang Wang & Haiyan Lu
March 2020, Volume 23, Issue 4
- 127-137 Biomechanical study of medial meniscus after posterior horn injury: a finite element analysis
by Peishi Jiang & Juncheng Cui & Zhiwei Chen & Zhu Dai & Yangchun Zhang & Guoliang Yi - 138-142 An in silico pipeline for subject-specific hemodynamics analysis in liver surgery planning
by H. Ho & H. B. Yu & A. Bartlett & P. Hunter - 143-154 Analytical and computational sliding wear prediction in a novel knee implant: a case study
by Mohd Sabri Hussin & Justin Fernandez & Maziar Ramezani & Pranesh Kumar & Piaras A. Kelly - 155-167 Individualized prediction of pedicle screw fixation strength with a finite element model
by Jonas Widmer & Marie-Rosa Fasser & Eleonora Croci & José Spirig & Jess G. Snedeker & Mazda Farshad
February 2020, Volume 23, Issue 3
- 81-91 Effect of axial prestretch and adipose tissue on the inflation-extension behavior of the human abdominal aorta
by Tereza Voňavková & Lukáš Horný - 92-102 Elementwise material assignment in reconstructed or transformed patient-specific FEA models developed from CT scans
by Peter Schwarzenberg & Hannah L. Dailey - 103-113 Characterization of the anisotropic deformation of the right ventricle during open heart surgery
by A. Soltani & J. Lahti & K. Järvelä & J. Laurikka & V.-T. Kuokkala & M. Hokka - 114-125 Accuracy and kinematics consistency of marker-based scaling approaches on a lower limb model: a comparative study with imagery data
by P. Puchaud & C. Sauret & A. Muller & N. Bideau & G. Dumont & H. Pillet & C. Pontonnier
January 2020, Volume 23, Issue 2
- 43-53 Influence of population variability in ligament material properties on the mechanical behavior of ankle: a computational investigation
by Yuanjie Liu & Qing Zhou & Shun Gan & Bingbing Nie - 54-68 Relating mechanical properties of vertebral trabecular bones to osteoporosis
by R. Cesar & J. Bravo-Castillero & R. R. Ramos & C. A. M. Pereira & H. Zanin & J. M. D. A. Rollo - 69-80 Finite element modeling and static/dynamic validation of thoracolumbar-pelvic segment
by Li-Xin Guo & Wu-Jie Li
January 2020, Volume 23, Issue 1
- 1-11 Three-dimensional structural optimization of a cementless hip stem using a bi-directional evolutionary method
by Reza Rahchamani & Reza Soheilifard - 12-22 Depth camera based statistical shape fitting approach for the creation of an individualized lower body biomechanical model: validity and reliability
by Bertram Taetz & Wolfgang Teufl & Alexander Weidmann & Juliane Pietschmann & Thomas Jöllenbeck & Gabriele Bleser - 23-32 Personalized hip joint kinetics during deep squatting in young, athletic adults
by Jan Van Houcke & Pavel E. Galibarov & Gilles Van Acker & Sigrid Fauconnier & Ellen Allaert & Tom Van Hoof & Diogo F. Almeida & Gunther Steenackers & Christophe Pattyn & Emmanuel A. Audenaert - 33-42 A computational fluid dynamics study pre- and post-fistula closure in a coronary artery fistula
by Haoyao Cao & Yue Qiu & Ding Yuan & Jianqun Yu & Da Li & Yi Jiang & Li Su & Liqing Peng & Tinghui Zheng
October 2019, Volume 22, Issue S1
- 1-1 Correction: 44th Congress of the Société de Biomécanique
by The Editors - 2-3 Avineck, the neck of the bird, an arm for the robots
by A. Abourachid & P. Wenger - 4-5 Use of a parametric finite element model of the mitral valve to assess healthy and pathological valve behaviors
by T. Alleau & L. Lanquetin & A.-V. Salsac - 6-8 A numerical design of experiment approach to understand aortic dissection onset and propagation
by J. Brunet & B. Pierrat & P. Badel - 9-10 Semi-automatic positioning of foot bones on X-Ray computed tomography images for bare vs shod foot comparison
by N. Kroupa & B. Pierrat & W.-S. Han & S. Grange & F. Bergandi & J. Molimard - 11-13 A mechatronic simulator for learning surgical procedures
by C. Brèque & J. Danion & E. Oriot & T. Vendeuvre & J. P Faure & G. Donatini & D. Oriot & J. P Richer - 14-16 Experimental protocol to evaluate lung parenchyma properties under inflation
by T. Pallière & A. Lanel & A. Bel-Brunon & K. Bruyère-Garnier & N. Biboulet & T. Lubrecht - 17-19 Biomechanical consequences of lumbar belt design for the therapeutic treatment of low back pain
by J. Molimard & W.-S Han & B. Pierrat & R. Pannetier & R. Convert