Content
2017, Volume 12, Issue 1
- 51-53 Thermal performance evaluation on vacuum insulation panels in composite building envelope under large temperature variations
by Ankang Kan & Jin Hu - 54-65 Thermodynamic and economic evaluation of a small-scale organic Rankine cycle integrated with a concentrating solar collector
by Milad Ashouri & Fatemeh Razi Astaraei & Roghaye Ghasempour & M.H. Ahmadi & Michel Feidt
2016, Volume 11, Issue 3
- 283-295 The performance and in-use experience of low to zero carbon technologies in an experimental energy home
by Nina Hormazábal & Mark Gillott & Brian Ford - 296-304 Towards clean and sustainable distributed energy system: the potential of integrated PEMFC-CHP
by I. Aleknaviciute & T.G. Karayiannis & M.W. Collins & C. Xanthos - 305-316 Investigating the potential of adding thermal mass to mitigate overheating in a super-insulated low-energy timber house
by Lucelia Rodrigues & Vasileios Sougkakis & Mark Gillott - 317-324 Thermodynamic analysis and optimization of the Atkinson engine by using NSGA-II
by Mohammad Hossein Ahmadi & Mohammad Ali Ahmadi & Arash Shafaei & Milad Ashouri & Somayeh Toghyani - 325-332 Applying a sophisticated approach to predict CO2 solubility in brines: application to CO2 sequestration
by Mohammad Ali Ahmadi & Alireza Ahmadi - 333-337 Improving photovoltaics performance by using yellow petroleum jelly as phase change material
by Yuli Setyo Indartono & Aryadi Suwono & Fendy Yuseva Pratama - 338-348 Numerical assessment of energy contribution by building integrated photovoltaics in a commercial/office building refurbishment in UK
by C.U. Ikedi & M.I. Okoroh & A.M. Dean - 349-362 Endoreversible modeling and optimization of multistage isothermal chemical engines under linear mass transfer law via Hamilton–Jacobi–Bellman theory
by Shaojun Xia & Lingen Chen & Fengrui Sun - 363-369 Performance study of a static low-concentration evacuated tube solar collector for medium-temperature applications
by Guiqiang Li & Gang Pei & Yuehong Su & Jie Ji & Dongyue Wang & Hongfei Zheng - 370-374 Alternative coating technologies for metal–ceramic nanocomposite films: potential application for solar thermal absorber
by F. Bensebaa & D. Di Domenicantonio & L. Scoles & D. Kingston & P. Mercier & G. Marshall - 375-382 Effects of thermocouples’ physical size on the performance of the TEG–TEH system
by Fankai Meng & Lingen Chen & Fengrui Sun - 383-392 Heating load and COP optimization of a double resonance energy selective electron (ESE) heat pump
by Zemin Ding & Lingen Chen & Fengrui Sun - 393-399 Effect of the working liquid to the capillary pumped loop performance
by Nikolaos A. Avgerinos & Dionissios P. Margaris & Demos T. Tsahalis - 400-415 Newly invented biobased materials from low-carbon, diverted waste fibers: research methods, testing, and full-scale application in a case study structure
by Julee A Herdt & John Hunt & Kellen Schauermann - 416-423 Review of heat pipe heat exchangers for enhanced dehumidification and cooling in air conditioning systems
by K. S. Ong - 424-430 A comprehensive assessment of sectoral energy consumption in the UK: past, present and future
by Erdem Cuce & Saffa B. Riffat - 431-439 Design and optimization of a thermoacoustic heat engine using reinforcement learning
by Jurriath-Azmathi Mumith & Tassos Karayiannis & Charalampos Makatsoris
2016, Volume 11, Issue 2
- 141-156 Investigation of the effect of design parameters on power output and thermal efficiency of a Stirling engine by thermodynamic analysis
by Mohammad Hossein Ahmadi & Mohammad Ali Ahmadi & Mehdi Mehrpooya - 157-168 Mean-line modeling and CFD analysis of a miniature radial turbine for distributed power generation systems
by Kiyarash Rahbar & Saad Mahmoud & Raya K. Al-Dadah - 169-176 Performance analysis of a cascaded solar Organic Rankine Cycle with superheating
by Jie Zhu & Hulin Huang - 177-183 Spanish photovoltaic learning curve
by Maria Rosario Garzón Sampedro & Carlos Sanchez Gonzalez - 184-192 Experimental study of a capillary pumped loop in comparison with the prediction of a 3D CFD
by Nikolaos A. Avgerinos & Dionissios P. Margaris & Demos T. Tsahalis - 193-198 Energy saving potential of indirect evaporative cooler under Indian climates
by J.K. Jain & D.A. Hindoliya - 199-204 Development of a nano-heat transfer fluid carrying direct absorbing receiver for concentrating solar collectors
by Ashley Toppin-Hector & Harjit Singh - 205-210 Hybrid hydrogen PEM fuel cell and batteries without DC–DC converter
by Jinlei Shang & Kevin Kendall & Bruno G. Pollet - 211-221 Energy and exergy analysis of passive solar distillation systems
by K.R. Ranjan & S.C. Kaushik & N.L. Panwar - 222-234 Design and commission a zero-carbon building for hot and humid climate
by Trevor S.K. Ng & Raymond M.H. Yau & Tony N.T. Lam & Vincent S.Y. Cheng - 235-239 A feasible energy-saving analysis of a new system for CO2 cryogenic capture
by Shuhong Li & Jie Ding & Xiaosong Zhang & Deyuan Cheng & Xinyu Hu & Xianliang Li - 240-247 Simultaneous synthesis of heat exchanger network with the non-isothermal mixing
by Zhao Liang & Yin Hongchao & Huo Zhaoyi - 248-253 Performance of U-tube solar water heater with vertical and inclined panels
by K.S. Ong & W.L. Tong & J.K. Choong - 254-265 An innovative psychometric solar-powered water desalination system
by Mahmoud Shatat & Saffa Riffat & Guohui Gan - 266-274 Capturing atmospheric carbon: biological and nonbiological methods
by Panchsheela Nogia & Gurpreet Kaur Sidhu & Rajesh Mehrotra & Sandhya Mehrotra - 275-282 Thermal analysis of PCM-filled glass windows in hot summer and cold winter area
by Shuhong Li & Yingying Zhou & Kecheng Zhong & Xiaosong Zhang & Xing Jin
2016, Volume 11, Issue 1
- 1-7 Thermodynamic optimization of a triple-shaft open intercooled-recuperated gas turbine cycle. Part 1: description and modeling
by Lingen Chen & Wenhua Wang & Fengrui Sun - 8-15 Economic feasibility evaluation of solar distillation systems based on the equivalent cost of environmental degradation and high-grade energy savings
by K. R. Ranjan & S. C. Kaushik - 16-28 Thermal modeling and experimental validation of solar tunnel dryer: a clean energy option for drying surgical cotton
by N. L. Panwar & S. C. Kaushik & Surendra Kothari - 29-34 Thermodynamic optimization of a triple-shaft open intercooled, recuperated gas turbine cycle. Part 2: power and efficiency optimization
by Wenhua Wang & Lingen Chen & Fengrui Sun - 35-41 Thermochemical cooling system based on adsorption pumping pipe
by Saffa Riffat & Yuehong Su & Yate Ding - 42-53 Power and power density analyzes of an endoreversible modified variable-temperature reservoir Brayton cycle with isothermal heat addition
by Junhua Wang & Lingen Chen & Yanlin Ge & Fengrui Sun - 54-60 Transient simulation of a solar absorption cooling system
by Akshaya Budania & Suhail Ahmad & Sanjeev Jain - 61-65 Toolbox engineering software for the analysis of sunlight on buildings
by A. Márquez-García & M. Varo-Martínez & R. López-Luque - 66-74 Electricity use in the commercial kitchen
by S. Mudie & E.A. Essah & A. Grandison & R. Felgate - 75-88 Energy performance of a residential building-integrated micro-cogeneration system upon varying thermal load and control logic
by G. Ciampi & A. Rosato & M. Scorpio & S. Sibilio - 89-108 An integrated approach for sustainable design and assessment of residential building envelope: part II
by Joseph Iwaro & Abrahams Mwasha & Rupert G. Williams & William Wilson - 109-118 Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation
by John Allison & Gavin Bruce Murphy & John Mark Counsell - 119-129 Effect of flow pulsation on energy consumption of a radiator in a centrally heated building
by M. Embaye & R.K. AL-Dadah & S. Mahmoud - 130-139 Simulating the influence of microclimatic design on mitigating the Urban Heat Island effect in the Hangzhou Metropolitan Area of China
by T. Shen & D. H. C. Chow & J. Darkwa
2015, Volume 10, Issue 4
- 321-331 Experimental analysis of an unconventional desiccant-based air-conditioning system: the influence of cooling air flow and chiller on the energy and environmental performance
by G. Angrisani & F. Minichiello & M. Sasso - 332-346 Design configurations analysis of wind-induced natural ventilation tower in hot humid climate using computational fluid dynamics
by Chin Haw Lim & Omidreza Saadatian & Kamaruzzaman Sopian & M. Yusof Sulaiman & Sohif Mat & Elias Salleh & K.C. Ng - 347-353 Skills development for retrofitting a historic listed building in Scotland
by Mohamed Abdel-Wahab & Amar Bennadji - 354-364 Study into solar-still performance under sealed and unsealed conditions
by Rohit Pillai & A. T. Libin & M. Mani - 365-373 Analysis of a SrCl2–NH3 solid sorption refrigeration system
by K. NagaMalleswara Rao & M. Ram Gopal & Souvik Bhattacharyya - 374-378 Comparison of sustainable information technologies for companies
by Onur Kartal & Aslı Gül Öncel - 379-385 Building integration of solar renewable energy systems towards zero or nearly zero energy buildings
by Soteris A. Kalogirou - 386-392 A sustainable transport solution for a Slovenia town
by Matjaž Knez & Ali Naci Celik & Tariq Muneer - 393-404 Existing buildings' operation and maintenance: renovation project of Chow Yei Ching Building at the University of Hong Kong
by Sun Xiaonuan & Stephen LAU SiuYu - 405-411 Energy savings analysis of fuel-cell microgeneration systems with ground source heat pumps in load-sharing buildings
by Soolyeon Cho & Eun Chul Kang & Euy Joon Lee - 412-419 Feasibility and optimization of aerogel glazing system for building energy efficiency in different climates
by Huan Wang & Huijun Wu & Yunfei Ding & Jingchen Feng & Shengwei Wang - 420-429 An innovative wind–solar hybrid street light: development and early testing of a prototype
by Renato Ricci & Daniele Vitali & Sergio Montelpare - 430-437 Reverse flow in natural convection heat pipe solar water heater
by Kok Seng Ong & Kevin Osmond & Wei Li Tong - 438-440 Analysis of greenhouse gases in the emissions of Brazilian freight transport
by André Shigueo Kiyota & Hugo Tsugunobu Yoshida Yoshizaki & Vanessa Meloni Massara - 441-445 Control system design for micro-tubular solid oxide fuel cells
by Tsang-I Tsai & Shangfeng Du & Peter Fisher & Kevin Kendall & Robert Steinberger-Wilckens - 446-451 The numerical simulation and experimental study on rack cooling effect in date center with UFAD system
by Yunzhi Ling & Xiaosong Zhang & Shuhong Li & Guannan Han & Xiaogeng Sun - 452-459 Cost-effective design of the alkaline electrolyser for enhanced electrochemical performance and reduced electrode degradation
by Daniel Symes & Bushra Al-Duri & Waldemar Bujalski & Aman Dhir - 460-463 Analysis of factors affecting CO2 emissions by civil buildings in China's urban areas
by Z. G. Liu & S. S. Wang & J. Y. Liu & F. Liu & X. L. Fu
2015, Volume 10, Issue 3
- 165-175 The impact of surface characteristics on ambient temperature at urban micro scale: comparative field study in two climates
by Carolina De Rezende Maciel & Maria Kolokotroni & Marta Cristina de J. A. Nogueira & Renganathan Giridharan & Richard Watkins - 176-187 A novel low-carbon space conditioning system incorporating phase-change materials and earth–air heat exchangers
by Lucelia Taranto Rodrigues & Mark Gillott - 188-204 Tracer gas technique for measurement of air infiltration and natural ventilation: case studies and new devices for measurement of mechanical air ventilation in ducts
by Clito Afonso - 205-215 Readdressing working fluid selection with a view to designing a variable geometry ejector
by Szabolcs Varga & Pedro S. Lebre & Armando C. Oliveira - 216-228 Failure of natural ventilation strategy in a sustainable house in China
by Hong Wang & Han Lin & Vicky C.Y. Ng & Ting Yang & Long Yu Guan - 229-237 Constructal optimization of a disc-shaped body with cooling channels for specified power pumping
by Huijun Feng & Lingen Chen & Zhihui Xie & Fengrui Sun - 238-245 Theoretical investigation of hot box solar cookers having conventional and finned absorber plates
by Erdem Cuce & Pinar Mert Cuce - 246-253 Computational study of a 2D capillary pump evaporator
by Nikolaos A. Avgerinos & Dionissios P. Margaris & Konstantinos X. Pittas & Demos T. Tsahalis - 254-257 Towards the generation of distributed electric power: self-consumption with net balance
by E. Molero-Mesa & A. Peña-García & D. Gómez-Lorente & O. Rabaza & J. Arán-Carrión & A. Espín-Estrella - 258-261 Design of a celestial vault image capture device for its application in the solar radiation field
by E.P. Varo & R. Posadillo & M. Varo-Martínez & R. López-Luque - 262-267 3D analysis of the incident diffuse irradiance on the building's surfaces in an urban environment
by Stoyanka M. Ivanova - 268-274 An integrated approach for sustainable design and assessment of residential building envelope: part I
by Joseph Iwaro & Abrahams Mwasha & Rupert G. Williams & William Wilson - 275-282 Numerical investigation of turbulent flow heat transfer and pressure drop of AL2O3/water nanofluid in helically coiled tubes
by Ahmed Elsayed & Raya K. Al-dadah & Saad Mahmoud & Ahmed Rezk - 283-287 Investigation of concentrating and nonconcentrating evacuated tube solar water heaters using 2D particle imaging velocimetry
by David A.G. Redpath & Philip Dalzell & Philip W. Griffiths & Neil J. Hewitt - 288-293 Calculations of effectiveness factors and the criteria of mass transfer effect for high-temperature methanation (HTM) catalyst
by Li-Jun Zhao & Qi Sun - 294-304 Design guideline for application of earth-to-air heat exchanger coupled with solar chimney as a natural heating system
by A. P. Haghighi & M. Maerefat - 305-312 Control strategies for indoor environment quality and energy efficiency—a review
by Y. Song & S. Wu & Y. Y. Yan - 313-320 Adaptive façade design for the daylighting performance in an office building: the investigation of an opening design strategy with cellular automata
by Jieun Kim
2015, Volume 10, Issue 2
- 1-1 Introductory Remarks
by Saffa Riffat - 99-109 Thermal energy storage: the role of the heat pipe in performance enhancement
by David A. Reay - 110-118 Identifying bottlenecks in charging infrastructure of plug-in hybrid electric vehicles through agent-based traffic simulation
by Juuso Lindgren & Peter D. Lund - 119-130 The retrofitting of an old style semi-detached house for energy reduction and carbon savings under the UK climate
by Mahmoud Shatat & David Tetlow & Saffa Riffat - 131-138 Numerical analysis of solar-assisted seasonal ‘open’ thermochemical heat storage
by Devrim Aydin & Sean P. Casey & Saffa Riffat - 139-145 High-efficiency ventilation and heating systems by means of solar air collectors for industry building refurbishment
by Benoit Sicre & Patrick Baumann - 146-156 Optimization of building-integrated photovoltaic thermal air system combined with thermal storage
by Yetao Xiang & Guohui Gan - 157-164 Solar low-pressure turbo-ejector Maisotsenko cycle-based power system for electricity, heating, cooling and distillation
by D. Buyadgie & O. Buyadgie & O. Drakhnia & P. Brodetsky & V. Maisotsenko
2015, Volume 10, Issue 1
- 1-2 Mitigation countermeasures to face urban warming
by Mattheos Santamouris - 1-98 NOTICE OF RETRACTION: China's 12th five-year plan: challenges and opportunities for sustainable energy technologies
by Kin Man Amazon Lee & Hong Chua - 3-14 Meteorological, emissions and air-quality modeling of heat-island mitigation: recent findings for California, USA
by Haider Taha - 15-33 The study of height variation on outdoor ventilation for Singapore's high-rise residential housing estates
by Rou Xuan Lee & Steve Kardinal Jusuf & Nyuk Hien Wong - 34-44 Experimental study of the urban microclimate mitigation potential of green roofs and green walls in street canyons
by Rabah Djedjig & Emmanuel Bozonnet & Rafik Belarbi - 45-61 Improving the performance of thermochromic coatings with the use of UV and optical filters tested under accelerated aging conditions
by Theoni Karlessi & Mat Santamouris - 62-77 Modeling methods to assess urban fluxes and heat island mitigation measures from street to city scale
by Emmanuel Bozonnet & Marjorie Musy & Isabelle Calmet & Fabrice Rodriguez - 78-86 Urban forests and solar power generation: partners in urban heat island mitigation
by Daniel C. Staley - 87-97 Quantification and mitigation of long-term impacts of urbanization and climate change in the tropical coastal city of San Juan, Puerto Rico
by Daniel E. Comarazamy & Jorge E. González & Jeffrey C. Luvall
2014, Volume 9, Issue 4
- 245-249 Theoretical and experimental study on solar ejector cooling system using R236fa
by B. Zhang & J.S. Lv & J.X. Zuo - 250-255 Comparing the thermal performance of horizontal slinky-loop and vertical slinky-loop heat exchangers
by C.S.A. Chong & G. Gan & A. Verhoef & R.G. Garcia - 256-261 Constructal re-optimization of heat conduction with the triangular elemental area
by Lingen Chen & Wenjun Wu & Fengrui Sun - 262-267 Finite-time exergoeconomic performance of a real intercooled regenerated gas turbine cogeneration plant. Part 2: heat conductance distribution and pressure ratio optimization
by Bo Yang & Lingen Chen & Yanlin Ge & Fengrui Sun - 268-276 In-use energy performance evaluation of a student accommodation in the UK
by Keyur Vadodaria - 277-283 Energetic and exergetic analyses of a transcritical N2O heat pump system
by Amol S. Dayma & Neeraj Agrawal & Prasant Nanda - 284-295 A preliminary study of the effect of groundwater flow on the thermal front created by borehole heat exchangers
by Ali Tolooiyan & Phil Hemmingway - 296-304 A parametric study of the energy performance of double-skin façades in climatic conditions of Crete, Greece
by Niki Papadaki & Sotiris Papantoniou & Dionysia Kolokotsa - 305-310 Optimization of configurations to enhance heat transfer from a longitudinal fin exposed to natural convection and radiation
by Pinar Mert Cuce & Erdem Cuce - 311-318 Optimization of a grid-connected renewable energy system for a case study in Nablus, Palestine
by Tamer Khatib - 319-326 Rooftop photovoltaic (PV) systems: a cost–benefit analysis study of industrial halls
by Bruno Lee & Marija Trcka & Jan L.M. Hensen - 327-330 Atrium building design: key aspects to improve their thermal performance on the Mediterranean climate of Santiago de Chile
by Diego Palma Rojas - 331-346 Yearly operation of a building-integrated microcogeneration system in south Italy: energy and economic analyses
by G. Ciampi & A. Rosato & S. Sibilio
2014, Volume 9, Issue 3
- 157-177 Produced water treatment technologies
by Ebenezer T. Igunnu & George Z. Chen - 178-188 Assessment of the technical potential for multifunction building zero-carbon renovation with EnergyPlus
by Zishang Zhu - 189-194 Thermodynamic optimization of an open cycle of an externally fired micro gas turbine. Part 2: Performance optimization
by Lingen Chen & Wanli Zhang & Fengrui Sun - 195-201 Modeling of a maximum power point tracker for a stand-alone photovoltaic system using MATLAB/Simulink
by N.H. Abdul Rahman & A.M. Omar - 202-213 Large-scale renewable energy integration within energy-efficient urban areas: results from three German case studies
by Ursula Eicker & Martin Klein - 214-224 Medium temperature concentrators for solar thermal applications
by Muhyiddine Jradi & Saffa Riffat - 225-236 Superhydrophobic flow channel surface and its impact on PEM fuel cell performance
by Yongxin Wang & Saher Al Shakhshir & Xianguo Li & Pu Chen - 237-243 A comparative study of carbon footprint and assessment standards
by Tao Gao & Qing Liu & Jianping Wang
2014, Volume 9, Issue 2
- 1-1 Introductory Remarks
by Saffa Riffat - 91-99 Micro-scale ORC-based combined heat and power system using a novel scroll expander
by Muhyiddine Jradi & Jinxing Li & Hao Liu & Saffa Riffat - 100-108 Assessment of climate-based daylight performance in tropical office buildings: a case study
by Szu-cheng Chien & King Jet Tseng - 109-117 Approach of a solar building integrated with multiple novel solar technologies
by Jie Ji & Zhi Yu & Wei Sun & Wu Wang - 118-126 Passive cooling technology for photovoltaic panels for domestic houses
by Shenyi Wu & Chenguang Xiong - 127-134 Catalytic CO2 conversion via solar-driven fluidized bed reactors
by Bo Wei & Reza Fakhrai & Bahram Saadatfar - 135-143 Efficiency of household energy utilization in rural China
by Qier An & Haizhong An & Lang Wang & Xuan Huang - 144-149 Performance and defrosting effect study on the air-to-water heat pump with heat storage device
by Zhiyi Wang & Hongxing Yang & Hao Huang - 150-156 Simulation of dynamic characteristics of droplet impact on liquid film
by Guo Yali & Wei Lan & Shen Shengqiang & Chen Guiying
2014, Volume 9, Issue 1
- 1-19 Water desalination technologies utilizing conventional and renewable energy sources
by Mahmoud Shatat & Saffa B. Riffat - 20-28 The area–point constructal entransy dissipation rate minimization for a discrete variable cross-section conducting path
by Lingen Chen & Shuhuan Wei & Fengrui Sun - 29-37 The finite-time exergoeconomic performance of a real, intercooled, regenerated gas-turbine cogeneration plant. Part 1: model description and parametric analyses
by Lingen Chen & Bo Yang & Yanlin Ge & Fengrui Sun - 38-44 Carbon dioxide refrigeration with heat recovery for supermarkets
by I. Colombo & G. G. Maidment & I. Chaer & J. M. Missenden - 45-51 Energy efficiency assessment of integrated and nonintegrated solar ponds
by Ismail Bozkurt & Mehmet Karakilcik & Ibrahim Dincer - 52-55 Estimation of carbon credit and direct carbon footprint by solar photovoltaic cells in West Bengal, India
by Susmita Mukherjee & P.B. Ghosh - 56-62 Exergy analysis of refrigeration systems using an alternative refrigerant (hfo-1234yf) to R-134a
by Arif Emre Özgür & Ahmet Kabul & Önder Kizilkan - 63-70 Syngas CO cleaning for fuel cell applications by preferential oxidation: catalyst development and reactor design
by Donglai Xie & Erato Zhang & Ruijun Li & Yajun Zhang - 71-79 Exergy analysis of a cooling system: experimental investigation on the consequences of the retrofit of R22 with R422D
by Ciro Aprea & Angelo Maiorino & Rita Mastrullo - 80-84 Homotopy perturbation method for temperature distribution, fin efficiency and fin effectiveness of convective straight fins
by Pinar Mert Cuce & Erdem Cuce & Cemalettin Aygun - 85-90 On the suitability of carbon dioxide in forced circulation-type secondary loops
by Ajay Kumar Yadav & Souvik Bhattacharyya & Ram Gopal Maddali
May 2013, Volume 8, Issue suppl_1
- 85-91 Design and performance analysis of a resorption cogeneration system
by L. Jiang & L.W. Wang & A.P. Roskilly & R.Z. Wang
July 2013, Volume 8, Issue suppl_1
- 1-1 Editorial
by Ian W Eames & Michael Tierney & Michel Van der Pal & David Reay
March 2013, Volume 8, Issue suppl_1
- 2-8 Heat-powered cycles: are the process industries "missing the boat"?
by David A. Reay - 55-61 First cycle simulations of the Honigmann process with LiBr/H 2 O and NaOH/H 2 O as working fluid pairs as a thermochemical energy storage
by Anna Jahnke & Lia Strenge & Christian Fleszner & Niklas Wolf & Tim Jungnickel & Felix Ziegler - 62-68 Advanced Organic Rankine Cycle for geothermal application
by Markus Preiszinger & Florian Heberle & Dieter Brüggemann - 69-78 Thermodynamic performance of Kalina cycle system 11 (KCS11): feasibility of using alternative zeotropic mixtures
by Ahmed Elsayed & Mebrahtu Embaye & Raya AL-Dadah & Saad Mahmoud & Ahmed Rezk
April 2013, Volume 8, Issue suppl_1
- 9-18 Organic Rankine cycles in waste heat recovery: a comparative study
by Alison Auld & Arganthaël Berson & Simon Hogg - 19-26 Analysis and simulation of modified ammonia/water absorption cycle for power and cooling applications
by Dereje S. Ayou & Rajagopal Saravanan & Joan Carles Bruno & Alberto Coronas - 27-33 A high-efficiency solar Rankine engine with isothermal expansion
by Opubo N. Igobo & Philip A. Davies - 34-41 Design of a small-scale organic Rankine cycle engine used in a solar power plant
by E. Georges & S. Declaye & O. Dumont & S. Quoilin & V. Lemort - 42-46 Comparison of combined heat and power systems using an organic Rankine cycle and a low-temperature heat source
by Mohammed Khennich & Nicolas Galanis & Mikhail Sorin - 47-54 Techno-economic comparison of a high-temperature heat pump and an organic Rankine cycle machine for low-grade waste heat recovery in UK industry
by Richard Law & Adam Harvey & David Reay - 79-84 Performance estimates of a helium-based thermoacoustic-Stirling chiller
by Matthew E. Poese & Robert M. Keolian & Robert W.M. Smith & Steven L. Garrett & Eric C. Mitchell
January 2013, Volume 8, Issue 2
- 80-87 A preliminary testing of a flat panel ground heat exchanger
by Michele Bottarelli
February 2013, Volume 8, Issue 2
- 95-105 Dynamic thermal modelling of horizontal ground-source heat pumps
by Guohui Gan
March 2013, Volume 8, Issue 2
- 71-79 Characterization of heat transport processes in geothermal systems
by Ulvi Arslan & Heiko Huber
May 2012, Volume 8, Issue 4
- 230-237 Optimal expansion of a heated ideal gas with time-dependent heat conductance
by Lingen Chen & Kang Ma & Fengrui Sun - 289-294 Performance analysis of an Atkinson cycle with variable specific heats of the working fluid under maximum efficient power conditions
by Kapil Patodi & Govind Maheshwari
April 2012, Volume 8, Issue 4
- 238-244 Comparative efficiency assessment of a multi-flash integrated system based on three efficiency definitions
by T.A.H. Ratlamwala & I. Dincer - 245-252 Study of helically coiled adiabatic capillary tubes for transcritical CO 2 expansion
by Neeraj Agrawal & Souvik Bhattacharyya - 253-259 Thermal performance of borehole heat exchangers in different aquifers: a case study from Shouguang
by Huajun Wang & Bin Yang & Jiayin Xie & Chengying Qi - 260-270 Experimental investigation and improvement in heat transfer of paraffin PCM RT58 storage system to take advantage of low peak tariff rates for heat pump applications
by Francis Agyenim & Neil Hewitt
March 2012, Volume 8, Issue 4
- 271-281 Climate-responsive integrability of building-integrated photovoltaics
by Gayathri Aaditya & Monto Mani - 282-288 Analysing the effects of seasonal variation on occupancy in an electricity demand model
by Amir Fazeli & Mark Gillott
January 2012, Volume 8, Issue 4
- 225-229 Current development of carbon capture and storage in the UK: a non-technical review
by Liben Jiang & Andrew S. Parry & Craig T. White & Rusdy Hartungi
March 2012, Volume 8, Issue 3
- 210-223 Study of the heat transport capacity of a novel gravitational loop heat pipe
by Xingxing Zhang & Xudong Zhao & Jihuan Xu & Xiaotong Yu
February 2012, Volume 8, Issue 3
- 147-158 A review of PCM technology for thermal energy storage in the built environment: Part I
by T.R. Whiffen & S.B. Riffat - 159-164 A review of PCM technology for thermal energy storage in the built environment: Part II
by T.R. Whiffen & S.B. Riffat - 180-187 Thermal response testing of compromised borehole heat exchangers
by Phil Hemmingway & Mike Long - 188-196 Internal and external simultaneous optimization of an irreversible thermoelectric generator for maximum power output
by Lingen Chen & Fankai Meng & Fengrui Sun - 197-202 Plasma-assisted decomposition of gaseous propane to produce CO x free hydrogen
by I. Aleknaviciute & T.G. Karayiannis & M.W. Collins & C. Xanthos - 203-209 Experimental study on the discharging performance of solar storage tanks with different inlet structures
by Shuhong Li & Yang Li & Xiaosong Zhang & Cai Wen
January 2012, Volume 8, Issue 3
- 165-172 Experimental investigation of a liquid desiccant cooling system driven by flue gas waste heat of a biomass boiler
by Guoquan Qiu & Hao Liu & Saffa B. Riffat - 173-179 Review: heat pipe heat exchangers at IROST
by E. Azad
May 2012, Volume 8, Issue 2
- 140-145 Ethanol reforming for supplying molten carbonate fuel cells
by Federico Rossi & Andrea Nicolini
January 2012, Volume 8, Issue 2
- 106-116 Thermochemical energy storage technologies for building applications: a state-of-the-art review
by Yate Ding & S.B. Riffat - 117-123 Feasibility of periodic thermosyphons for environmentally friendly ground source cooling applications
by Sauro Filippeschi & Yuehong Su & Saffa B. Riffat - 124-133 Thermodynamic analysis of a sorption refrigeration system with and without internal heat recovery
by K. Naga Malleswara Rao & M. Ram Gopal & Souvik Bhattacharyya - 134-139 Numerical simulation of dynamics of droplet impact on heated flat solid surface
by Yali Guo & Shengqiang Shen & Shenglin Quan
December 2012, Volume 8, Issue 2
- 88-94 Multisource heat pump system from design to operation: the case study of a new school building
by Filippo Busato & Renato M. Lazzarin & Marco Noro
January 2012, Volume 8, Issue 1
- 58-63 Yaw analysis of a micro-scale horizontal-axis wind turbine operating in turbulent wind conditions
by Tom Rogers & Siddig Omer
February 2012, Volume 8, Issue 1
- 64-69 Sorption, permeation and selective transport of moisture/VOCs through a CA membrane for total heat recovery
by Xin-Ru Zhang & Li-Zhi Zhang & Li-Xia Pei
June 2012, Volume 7, Issue 4
- 264-270 Analysis on the development prospect of natural gas utilization in Shenzhen
by Jianhui Liu & Qiuxiong Chen & Xuemei Lang & Yanhong Wang & Shuanshi Fan
July 2012, Volume 7, Issue 4
- 257-263 Emissions and thermal efficiency investigation of a pressurized submerged combustion evaporator
by Xiaolong Gong & Zhongliang Liu & Han Jiang
April 2012, Volume 7, Issue 4
- 271-274 Characterization and performance of novel modified silica gel/molecular sieve composite
by Yutang Fang & Wenfan Yao & Jinghua Guo & Xuenong Gao - 280-287 Modeling of micro/meso-scale reactive transport phenomena in catalyst layers of proton exchange membrane fuel cells
by Yu Xiao & Jinliang Yuan & Bengt Sundén - 288-302 Composites ‘salt inside porous matrix’ for adsorption heat transformation: a current state-of-the-art and new trends
by L. G. Gordeeva & Yu. I. Aristov - 303-309 Impact of climate change on ventilation load and energy use of air conditioning systems in buildings of Hong Kong
by Ronghui Qi & Lin Lu & Hongxing Yang - 310-317 Problems involved in the shell-side performance of a longitudinal-flow shell-and-tube heat exchanger with decrease in L/D and its solutions
by Wen-Liang Zeng & Zheng-Guo Zhang
December 2012, Volume 7, Issue 4
March 2012, Volume 7, Issue 4
- 275-279 Preparation, hydrothermal stability and thermal adsorption storage properties of binderless zeolite beads
by Jochen Jänchen & Kristin Schumann & Erik Thrun & Alfons Brandt & Baldur Unger & Udo Hellwig
September 2012, Volume 7, Issue 3
- 167-167 Editorial
by Jo Darkwa
April 2012, Volume 7, Issue 3
- 248-254 A simulation study for a low carbon consumption HVAC project using EnergyPlus
by Sheng Zhu & Jiufa Chen
March 2012, Volume 7, Issue 3
- 215-225 A preliminary study on environmental performances of pocket parks in high-rise and high-density urban context in Hong Kong
by Stephen Siuyu Lau & Pingying Lin & Hao Qin - 226-233 Research and discussion on energy consumption indicators of different items of large-scale public buildings in Shanghai
by Cong Zhou & Weifeng Zhu & Youdi Jiang