IDEAS home Printed from https://ideas.repec.org/a/zib/zjmerd/v42y2019i2p72-75.html
   My bibliography  Save this article

A Study Of Phase Transformation In Shape Memory Alloy Cual9fe4

Author

Listed:
  • Nguyen Duong Nam

    (Viet Nam Maritime University, Hai Phong City, Viet Nam.)

  • Vu Anh Tuan

    (Viet Nam Maritime University, Hai Phong City, Viet Nam.)

  • Nguyen Hai Yen

    (Viet Nam Maritime University, Hai Phong City, Viet Nam.)

  • Dao Van Lap

    (Viet Nam Maritime University, Hai Phong City, Viet Nam.)

  • Pham Mai Khanh

    (School of Material Science and Engineering, Ha Noi University of Science and Technology, Ha Noi City, Viet Nam.)

Abstract

Microstructure and phase transformation in shape memory alloy Cu-Al (Fe addition: 9% Al, 4 % Fe) were investigated in this study. It is a material capable of restoring its original shape when impacted by a reasonable temperature or cyclic stress and production cost is not too expensive. In many years, shape memory alloys (SMA) based on Cu – Fe is considered to be very attractive to industrial and biomedical applications such as cardiovascular, orthopedic, surgery and production of spare parts and jigs. Original alloy exists β martensite and only exists 〖α^’〗_1 (3R)+ 〖β’〗_1(9R) + 〖γ^’〗_(1 ) (2H) which is finely dispersed homogenously in microstructure after finishing shape memory transformation. Shape memory rate obtained 6%-24% corresponding to each deformation angle before the experiment. Phase transformation between these two phases during deformation as well as the heating-cooling process which create the basis for the unique properties of the alloy.

Suggested Citation

  • Nguyen Duong Nam & Vu Anh Tuan & Nguyen Hai Yen & Dao Van Lap & Pham Mai Khanh, 2019. "A Study Of Phase Transformation In Shape Memory Alloy Cual9fe4," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 72-75, March.
    • Handle: RePEc:zib:zjmerd:v:42:y:2019:i:2:p:72-75
    DOI: 10.26480/jmerd.02.2019.72.75
    as

    Download full text from publisher

    File URL: https://jmerd.org.my/download/3224/
    Download Restriction: no
    File URL: https://libkey.io/10.26480/jmerd.02.2019.72.75?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Hoang, Anh Tuan, 2018. "Waste heat recovery from diesel engines based on Organic Rankine Cycle," Applied Energy, Elsevier, vol. 231(C), pages 138-166.
    2. Ahmed Abugalia, 2019. "Effect Of Corona On The Wave Propagation Along Overhead Transmission Lines," Acta Electronica Malaysia (AEM), Zibeline International Publishing, vol. 3(1), pages 6-9, January.
    3. S. Sathishkumar & Dr. M. Kannan, 2018. "Design And Fatigue Analysis Of Multi Cylinder Engine And Its Structural Components," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 10-14, January.
    4. Neha Jain & Somya Rastogi, 2019. "Speech Recognition Systems – A Comprehensive Study Of Concepts And Mechanism," Acta Informatica Malaysia (AIM), Zibeline International Publishing, vol. 3(1), pages 1-3, January.
    5. Xiaochao Tian & Qinghua Li & Chunshan He & Yunguang Cai & Yan Zhang & Zhigang Yang, 2018. "Design and experiment of reciprocating double Track Straight Line Conveyor," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 1(2), pages 1-4, February.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Valery A. Konyavsky & Gennady V. Ross, 2019. "Computer With Changeable Architecture," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 19-23, March.
    2. Xuan Phuong Nguyen, 2019. "The Bus Transportation Issue And People Satisfaction With Public Transport In Ho Chi Minh City ," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 10-16, January.
    3. repec:zib:zjmerd:4jmerd2018-116-121 is not listed on IDEAS
    4. Ping, Xu & Yang, Fubin & Zhang, Hongguang & Xing, Chengda & Zhang, Wujie & Wang, Yan & Yao, Baofeng, 2023. "Dynamic response assessment and multi-objective optimization of organic Rankine cycle (ORC) under vehicle driving cycle conditions," Energy, Elsevier, vol. 263(PA).
    5. Jiménez-Arreola, Manuel & Wieland, Christoph & Romagnoli, Alessandro, 2019. "Direct vs indirect evaporation in Organic Rankine Cycle (ORC) systems: A comparison of the dynamic behavior for waste heat recovery of engine exhaust," Applied Energy, Elsevier, vol. 242(C), pages 439-452.
    6. Hossein Nami & Amjad Anvari-Moghaddam & Ahmad Arabkoohsar & Amir Reza Razmi, 2020. "4E Analyses of a Hybrid Waste-Driven CHP–ORC Plant with Flue Gas Condensation," Sustainability, MDPI, vol. 12(22), pages 1-21, November.
    7. Xia, Jiaxi & Wang, Jiangfeng & Lou, Juwei & Hu, Jianjun & Yao, Sen, 2023. "Thermodynamic, economic, environmental analysis and multi-objective optimization of a novel combined cooling and power system for cascade utilization of engine waste heat," Energy, Elsevier, vol. 277(C).
    8. Michael Chukwuemeka Ekwonu & Mirae Kim & Binqi Chen & Muhammad Tauseef Nasir & Kyung Chun Kim, 2023. "Dynamic Simulation of Partial Load Operation of an Organic Rankine Cycle with Two Parallel Expanders," Energies, MDPI, vol. 16(1), pages 1-18, January.
    9. Tang, Yujun & Feng, Jinfeng & Wang, Dawei & Zhu, Sipeng & Bai, Shuzhan & Li, Guoxiang, 2024. "Multi-mode operation of a novel dual-pressure steam rankine cycle system recovering multi-grade waste heat from a marine two-stroke engine equipped with the high-pressure exhaust gas recirculation sys," Energy, Elsevier, vol. 301(C).
    10. Jin, Yunli & Gao, Naiping & Zhu, Tong, 2022. "Effect of resistive load characteristics on the performance of Organic Rankine cycle (ORC)," Energy, Elsevier, vol. 246(C).
    11. Li, Jian & Peng, Xiayao & Yang, Zhen & Hu, Shuozhuo & Duan, Yuanyuan, 2022. "Design, improvements and applications of dual-pressure evaporation organic Rankine cycles: A review," Applied Energy, Elsevier, vol. 311(C).
    12. Hoang, Anh Tuan & Tabatabaei, Meisam & Aghbashlo, Mortaza & Carlucci, Antonio Paolo & Ölçer, Aykut I. & Le, Anh Tuan & Ghassemi, Abbas, 2021. "Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    13. Jie Ren & Zuoqin Qian & Xinyu Wang & Weilong Huang & Baolin Wang, 2024. "Investigation of a Biomass-Driven Cogeneration System Integrated with an Externally Fired Gas Turbine, Organic Rankine Cycle, and Absorption Refrigeration Cycle: Thermodynamic and Exergoeconomic Analy," Sustainability, MDPI, vol. 16(11), pages 1-35, May.
    14. Quoc Viet Pham & Van Hai Nguyen, 2019. "Proposal Of Some Advanced Technology Methods In The Assembly Of The Shaft System - Main Engine On The Small Cargo Ships," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 81-84, February.
    15. Imran, Muhammad & Pili, Roberto & Usman, Muhammad & Haglind, Fredrik, 2020. "Dynamic modeling and control strategies of organic Rankine cycle systems: Methods and challenges," Applied Energy, Elsevier, vol. 276(C).
    16. Agarwal A. & Seretse O.M. & Letsatsi M.T. & Maele L.T. & Koketso D., 2019. "Performance Evolution Of An Improved Solar Thermal Hot Air Heating System For Drying Ground-Nut," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 01-05, March.
    17. Tran Thi Thanh Van & Tran Ngoc Thanh & Phạm Ngoc Vuong & Nguyen Duong Nam, 2019. "Calculation Of Cylindrical Products Made Of Composite Materials Using Wrap Technology," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(2), pages 76-78, March.
    18. Igor E. Lipkovich & Irina V. Egorova & Nadezhda V. Petrenko & Anna S. Gayda, 2019. "Influence Of The Human-Machine Systems (HMS) Operation Mode On The Increase Of Grain-Harvesting Aggregates Productivity," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(3), pages 10-14, March.
    19. Van Viet Pham, 2018. "Analyzing The Effect Of Heated Wall Surface Temperatures Combustion Chamber Deposit Formation," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 41(4), pages 17-21, November.
    20. Ma, Xiaonan & Shu, Gequn & Tian, Hua & Xu, Wen & Chen, Tianyu, 2019. "Performance assessment of engine exhaust-based segmented thermoelectric generators by length ratio optimization," Applied Energy, Elsevier, vol. 248(C), pages 614-625.
    21. Yongchao Sun & Pengyuan Sun & Zhixiang Zhang & Shuchao Zhang & Jian Zhao & Ning Mei, 2022. "Performance Prediction for a Marine Diesel Engine Waste Heat Absorption Refrigeration System," Energies, MDPI, vol. 15(19), pages 1-22, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:zib:zjmerd:v:42:y:2019:i:2:p:72-75. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Zibeline International Publishing The email address of this maintainer does not seem to be valid anymore. Please ask Zibeline International Publishing to update the entry or send us the correct address (email available below). General contact details of provider: https://jmerd.org.my/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.