IDEAS home Printed from https://ideas.repec.org/a/plo/pone00/0304097.html
   My bibliography  Save this article

Performance optimization for an optimal operating condition for a shell and heat exchanger using a multi-objective genetic algorithm approach

Author

Listed:
  • B Venkatesh
  • Ajmeera Kiran
  • Mudassir Khan
  • Mohammad Khalid Imam Rahmani
  • Laxmi Upadhyay
  • J Chinna Babu
  • T Lakshmi Narayana

Abstract

In this study, shell and heat exchangers are optimized using an integrated optimization framework. In this research, A structured Design of Experiments (DOE) comprising 16 trials was first conducted to systematically determine the essential parameters, including mass flow rates (mh, mc), temperatures (T1, t1, T2, t2), and heat transfer coefficients (€, TR, U). By identifying the first four principal components, PCA was able to determine 87.7% of the variance, thereby reducing the dimensionality of the problem. Performance-related aspects of the system are the focus of this approach. Key outcomes (€, TR, U) were predicted by 99% R-squared using the RSM models. Multiple factors, such as the mass flow rate and inlet temperature, were considered during the design process. The maximizing efficiency, thermal resistance, and utility were achieved by considering these factors. By using genetic algorithms, Pareto front solutions that meet the requirements of decision-makers can be found. The combination of the shell and tube heat exchangers produced better results than expected. Engineering and designers can gain practical insight into the mass flow rate, temperature, and key responses (€, TR, U) if they quantify improvements in these factors. Despite the importance of this study, it has several potential limitations, including specific experimental conditions and the need to validate it in other situations as well. Future research could investigate other factors that influence system performance. A holistic optimization framework can improve the design and engineering of heat exchangers in the future. As a result of the study, a foundation for innovative advancements in the field has been laid with tangible improvements. The study exceeded expectations by optimizing shell and heat exchanger systems using an integrated approach, thereby contributing significantly to the advancement of the field.

Suggested Citation

  • B Venkatesh & Ajmeera Kiran & Mudassir Khan & Mohammad Khalid Imam Rahmani & Laxmi Upadhyay & J Chinna Babu & T Lakshmi Narayana, 2024. "Performance optimization for an optimal operating condition for a shell and heat exchanger using a multi-objective genetic algorithm approach," PLOS ONE, Public Library of Science, vol. 19(6), pages 1-25, June.
    • Handle: RePEc:plo:pone00:0304097
    DOI: 10.1371/journal.pone.0304097
    as

    Download full text from publisher

    File URL: https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0304097
    Download Restriction: no
    File URL: https://journals.plos.org/plosone/article/file?id=10.1371/journal.pone.0304097&type=printable
    Download Restriction: no
    File URL: https://libkey.io/10.1371/journal.pone.0304097?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Gasia, Jaume & Tay, N.H. Steven & Belusko, Martin & Cabeza, Luisa F. & Bruno, Frank, 2017. "Experimental investigation of the effect of dynamic melting in a cylindrical shell-and-tube heat exchanger using water as PCM," Applied Energy, Elsevier, vol. 185(P1), pages 136-145.
    2. Arnold, Steven F., 2006. "Design of Experiments with MINITAB. Paul Mathews," The American Statistician, American Statistical Association, vol. 60, pages 205-205, May.
    3. Zhang, Tianyi & Chen, Lei & Wang, Jin, 2023. "Multi-objective optimization of elliptical tube fin heat exchangers based on neural networks and genetic algorithm," Energy, Elsevier, vol. 269(C).
    4. Asif Ali & Lorenzo Cocchi & Alessio Picchi & Bruno Facchini, 2020. "Experimental Determination of the Heat Transfer Coefficient of Real Cooled Geometry Using Linear Regression Method," Energies, MDPI, vol. 14(1), pages 1-18, December.
    5. Lorenzo Gragnaniello & Marcello Iasiello & Gerardo Maria Mauro, 2022. "Multi-Objective Optimization of a Heat Sink for the Thermal Management of a Peltier-Cell-Based Biomedical Refrigerator," Energies, MDPI, vol. 15(19), pages 1-12, October.
    6. Wang, Zhangyuan & Zhao, Xudong & Han, Zhonghe & Luo, Liang & Xiang, Jinwei & Zheng, Senglin & Liu, Guangming & Yu, Min & Cui, Yu & Shittu, Samson & Hu, Menglong, 2021. "Advanced big-data/machine-learning techniques for optimization and performance enhancement of the heat pipe technology – A review and prospective study," Applied Energy, Elsevier, vol. 294(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ying Guan & Hongjiang Cui & Jiyou Fei, 2023. "Study on Optimization of Copper to Aluminum for Locomotive Finned Tube Radiator," Energies, MDPI, vol. 16(5), pages 1-13, February.
    2. Koide, Hiroaki & Kurniawan, Ade & Takahashi, Tatsuya & Kawaguchi, Takahiro & Sakai, Hiroki & Sato, Yusuke & Chiu, Justin NW. & Nomura, Takahiro, 2022. "Performance analysis of packed bed latent heat storage system for high-temperature thermal energy storage using pellets composed of micro-encapsulated phase change material," Energy, Elsevier, vol. 238(PC).
    3. Zhao, Guanjia & Cui, Zhipeng & Xu, Jing & Liu, Wenhao & Ma, Suxia, 2022. "Hybrid modeling-based digital twin for performance optimization with flexible operation in the direct air-cooling power unit," Energy, Elsevier, vol. 254(PC).
    4. Liu, Ming & Riahi, Soheila & Jacob, Rhys & Belusko, Martin & Bruno, Frank, 2020. "Design of sensible and latent heat thermal energy storage systems for concentrated solar power plants: Thermal performance analysis," Renewable Energy, Elsevier, vol. 151(C), pages 1286-1297.
    5. Su, Wei & Ai, Zhengtao & Yang, Bin, 2024. "Performance of latent heat storage exchangers: Evaluation framework and fast prediction model," Renewable Energy, Elsevier, vol. 237(PD).
    6. Jalal Faraj & Khaled Chahine & Mostafa Mortada & Thierry Lemenand & Haitham S. Ramadan & Mahmoud Khaled, 2022. "Eco-Efficient Vehicle Cooling Modules with Integrated Diffusers—Thermal, Energy, and Environmental Analyses," Energies, MDPI, vol. 15(21), pages 1-19, October.
    7. Saiwei Li & Yu Chen & Zhiqiang Sun, 2017. "Numerical Simulation and Optimization of the Melting Process of Phase Change Material inside Horizontal Annulus," Energies, MDPI, vol. 10(9), pages 1-14, August.
    8. Liang, Lin & Zhao, Yaohua & Diao, Yanhua & Ren, Ruyang & Zhu, Tingting & Li, Yan, 2023. "Experimental investigation of preheating performance of lithium-ion battery modules in electric vehicles enhanced by bending flat micro heat pipe array," Applied Energy, Elsevier, vol. 337(C).
    9. Yao, Jin & Zhang, Zijin & Saari, Jussi & Wang, Jin & Čuček, Lidija & Zheng, Dan, 2024. "Structure optimization of intercooler bionic fins based on artificial neural network and genetic algorithms," Energy, Elsevier, vol. 307(C).
    10. Xun Yang & Teng Xiong & Jing Liang Dong & Wen Xin Li & Yong Wang, 2017. "Investigation of the Dynamic Melting Process in a Thermal Energy Storage Unit Using a Helical Coil Heat Exchanger," Energies, MDPI, vol. 10(8), pages 1-18, August.
    11. Hu, Zhipei & Jiang, Shuo & Sun, Zhigao & Li, Jun, 2024. "Numerical simulation of fin arrangements on the melting process of PCM in a rectangular unit," Renewable Energy, Elsevier, vol. 220(C).
    12. Chang, Chun & Xu, Xiaoyu & Guo, Xinxin & Yu, Rong & Rasakhodzhaev, Bakhramzhan & Bao, Daorina & Zhao, Mingzhi, 2024. "Experimental and numerical study during the solidification process of a vertical and horizontal coiled ice storage system," Energy, Elsevier, vol. 298(C).
    13. Li, Zhaomeng & Ji, Jie & Li, Jing & Zhao, Xudong & Cui, Yu & Song, Zhiying & Wen, Xin & Yao, TingTing, 2022. "Experimental investigation and annual performance mathematical-prediction on a novel LT-PV/T system using spiral-descent concentric copper tube heat exchanger as the condenser for large-scale applicat," Renewable Energy, Elsevier, vol. 187(C), pages 257-270.
    14. Liu, Yuntao & Cui, Can, 2024. "A bi-level real-time optimal control strategy for thermal coupled multi-zone dedicated outside air system-assisted HVAC systems," Energy, Elsevier, vol. 306(C).
    15. Zhang, Guangpeng & Wu, Huijun & Liu, Jia & Liu, Yanchen & Ding, Yujie & Huang, Huakun, 2024. "A review on switchable building envelopes for low-energy buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 202(C).
    16. Egea, A. & García, A. & Herrero-Martín, R. & Pérez-García, J., 2022. "Experimental performance of a novel scraped surface heat exchanger for latent energy storage for domestic hot water generation," Renewable Energy, Elsevier, vol. 193(C), pages 870-878.
    17. Wang, Pengfei & Zhu, Ze & Liang, Wenlong & Liao, Longtao & Wan, Jiashuang, 2023. "Hybrid mechanistic and neural network modeling of nuclear reactors," Energy, Elsevier, vol. 282(C).
    18. Gasia, Jaume & Miró, Laia & Cabeza, Luisa F., 2017. "Review on system and materials requirements for high temperature thermal energy storage. Part 1: General requirements," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1320-1338.
    19. Wen, Shihao & Zhang, Jiaxin & Liu, Sumei & Liu, Junjie, 2025. "Numerical simulation investigation of heat exchangers for active chilled beams based on neural networks and a genetic algorithm," Applied Energy, Elsevier, vol. 378(PA).
    20. Chen, Hao & Zhang, Chao & Yu, Haizeng & Wang, Zhilin & Duncan, Ian & Zhou, Xianmin & Liu, Xiliang & Wang, Yu & Yang, Shenglai, 2022. "Application of machine learning to evaluating and remediating models for energy and environmental engineering," Applied Energy, Elsevier, vol. 320(C).

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:plo:pone00:0304097. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: plosone (email available below). General contact details of provider: https://journals.plos.org/plosone/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.