IDEAS home Printed from https://ideas.repec.org/a/oup/ijlctc/v18y2023ip482-493..html
   My bibliography  Save this article

Design and modelling of a small-scale reversible high-temperature heat pump—organic Rankine cycle system for industrial waste heat recovery

Author

Listed:
  • Rahul Velanparambil Ravindran
  • Ming Jun Huang
  • Neil Hewitt

Abstract

Organic Rankine cycle (ORC) and heat pump (HP) are two well-established technologies for industrial waste heat recovery. Given the similarity between ORC and HP configurations, a system that can switch between HP and ORC modes with minimal modification is feasible. The reversible system according to the requirement of the industry can exploit waste heat in lower temperature bands operating as a high-temperature heat pump (HTHP) to provide useful process heat or as an ORC system generating power and thus increasing the efficiency of waste heat exploitation. This study discusses the design aspects of a small-scale reversible HTHP—ORC system, including the system layout, component selection, selection of an appropriate working fluid, the operating conditions for both modes and equipment sizing. R1233zd(E) was selected as the refrigerant for the reversible system and an automotive open-drive scroll compressor was found to be suitable, which can also be used as an expander for ORC with minimum modifications. The study also presents the modelling of the reversible system in ORC and HTHP modes including performance analysis of the scroll machine in expander and compressor roles attaining isentropic efficiency values up to 62.4 and 75.4%, respectively. The modelling results show a cycle efficiency of 5.9% (Tev = 102°C, $ \dot{m} $r = 0.064 kg/s) in ORC mode and a coefficient of performance of 4.19 in HTHP mode (for a temperature lift of 49 K with Tsource: 85°C, Ncomp: 2000 rpm).

Suggested Citation

  • Rahul Velanparambil Ravindran & Ming Jun Huang & Neil Hewitt, 2023. "Design and modelling of a small-scale reversible high-temperature heat pump—organic Rankine cycle system for industrial waste heat recovery," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 18, pages 482-493.
    • Handle: RePEc:oup:ijlctc:v:18:y:2023:i::p:482-493.
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1093/ijlct/ctad038
    Download Restriction: Access to full text is restricted to subscribers.
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Dumont, Olivier & Parthoens, Antoine & Dickes, Rémi & Lemort, Vincent, 2018. "Experimental investigation and optimal performance assessment of four volumetric expanders (scroll, screw, piston and roots) tested in a small-scale organic Rankine cycle system," Energy, Elsevier, vol. 165(PA), pages 1119-1127.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Moradi, Ramin & Habib, Emanuele & Bocci, Enrico & Cioccolanti, Luca, 2020. "Investigation on the use of a novel regenerative flow turbine in a micro-scale Organic Rankine Cycle unit," Energy, Elsevier, vol. 210(C).
    2. Campana, Claudio & Cioccolanti, Luca & Renzi, Massimiliano & Caresana, Flavio, 2019. "Experimental analysis of a small-scale scroll expander for low-temperature waste heat recovery in Organic Rankine Cycle," Energy, Elsevier, vol. 187(C).
    3. Kutlu, Cagri & Erdinc, Mehmet Tahir & Li, Jing & Su, Yuehong & Pei, Gang & Gao, Guangtao & Riffat, Saffa, 2020. "Evaluate the validity of the empirical correlations of clearance and friction coefficients to improve a scroll expander semi-empirical model," Energy, Elsevier, vol. 202(C).
    4. Fabio Fatigati & Marco Di Bartolomeo & Davide Di Battista & Roberto Cipollone, 2020. "Experimental Validation of a New Modeling for the Design Optimization of a Sliding Vane Rotary Expander Operating in an ORC-Based Power Unit," Energies, MDPI, vol. 13(16), pages 1-23, August.
    5. Fabio Fatigati & Diego Vittorini & Yaxiong Wang & Jian Song & Christos N. Markides & Roberto Cipollone, 2020. "Design and Operational Control Strategy for Optimum Off-Design Performance of an ORC Plant for Low-Grade Waste Heat Recovery," Energies, MDPI, vol. 13(21), pages 1-23, November.
    6. Guido Francesco Frate & Lorenzo Ferrari & Umberto Desideri, 2020. "Rankine Carnot Batteries with the Integration of Thermal Energy Sources: A Review," Energies, MDPI, vol. 13(18), pages 1-28, September.
    7. Wronski, Jorrit & Imran, Muhammad & Skovrup, Morten Juel & Haglind, Fredrik, 2019. "Experimental and numerical analysis of a reciprocating piston expander with variable valve timing for small-scale organic Rankine cycle power systems," Applied Energy, Elsevier, vol. 247(C), pages 403-416.
    8. Fanti, Gabriel Rossi & Romão, Douglas Araújo & de Almeida, Ricardo Barbosa & de Mello, Paulo Eduardo Batista, 2020. "Influence of flank clearance on the performance of a scroll expander prototype," Energy, Elsevier, vol. 193(C).
    9. Ping, Xu & Yang, Fubin & Zhang, Hongguang & Wang, Yan & Lei, Biao & Wu, Yuting, 2022. "Performance limits of the single screw expander in organic Rankine cycle with ensemble learning and hyperdimensional evolutionary many-objective optimization algorithm intervention," Energy, Elsevier, vol. 245(C).
    10. Vodicka, Vaclav & Novotny, Vaclav & Zeleny, Zbynek & Mascuch, Jakub & Kolovratnik, Michal, 2019. "Theoretical and experimental investigations on the radial and axial leakages within a rotary vane expander," Energy, Elsevier, vol. 189(C).
    11. Daniarta, Sindu & Imre, Attila R. & Kolasiński, Piotr, 2022. "Thermodynamic efficiency of subcritical and transcritical power cycles utilizing selected ACZ working fluids," Energy, Elsevier, vol. 254(PA).
    12. Talluri, Lorenzo & Dumont, Olivier & Manfrida, Giampaolo & Lemort, Vincent & Fiaschi, Daniele, 2020. "Geometry definition and performance assessment of Tesla turbines for ORC," Energy, Elsevier, vol. 211(C).
    13. Xinxin Zhang & Yin Zhang & Min Cao & Jingfu Wang & Yuting Wu & Chongfang Ma, 2019. "Working Fluid Selection for Organic Rankine Cycle Using Single-Screw Expander," Energies, MDPI, vol. 12(16), pages 1-23, August.
    14. Di Cairano, L. & Bou Nader, W. & Nemer, M., 2021. "A simulation and experimental study of an innovative MAC/ORC/ERC system: ReverCycle with an ejector for series hybrid vehicles," Energy, Elsevier, vol. 230(C).
    15. Piotr Kolasiński, 2020. "The Method of the Working Fluid Selection for Organic Rankine Cycle (ORC) Systems Employing Volumetric Expanders," Energies, MDPI, vol. 13(3), pages 1-28, January.
    16. Emhardt, Simon & Tian, Guohong & Song, Panpan & Chew, John & Wei, Mingshan, 2020. "CFD modelling of small scale ORC scroll expanders using variable wall thicknesses," Energy, Elsevier, vol. 199(C).
    17. Fabio Fatigati & Marco Di Bartolomeo & Davide Di Battista & Roberto Cipollone, 2019. "Experimental and Numerical Characterization of the Sliding Rotary Vane Expander Intake Pressure in Order to Develop a Novel Control-Diagnostic Procedure," Energies, MDPI, vol. 12(10), pages 1-17, May.
    18. Xiong, Yaxuan & Zhang, Aitonglu & Peng, Xiaodong & Yao, Chenhua & Wang, Nan & Wu, Yuting & Xu, Qian & Ma, Chongfang, 2023. "Investigation of a sole gas expander for gas pressure regulation and energy recovery," Energy, Elsevier, vol. 281(C).
    19. Ali Naseri & Ramin Moradi & Luca Cioccolanti & Alison Subiantoro, 2023. "Impact of the Lubricant on a Modified Revolving Vane Expander (M-RVE) in an Organic Rankine Cycle System," Energies, MDPI, vol. 16(14), pages 1-17, July.
    20. Naseri, Ali & Moradi, Ramin & Norris, Stuart & Subiantoro, Alison, 2022. "Experimental investigation of a revolving vane expander in a micro-scale organic Rankine cycle system for low-grade waste heat recovery," Energy, Elsevier, vol. 253(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:oup:ijlctc:v:18:y:2023:i::p:482-493.. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Oxford University Press (email available below). General contact details of provider: https://academic.oup.com/ijlct .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.